OKI B721dn Owner's manual

OKI
Brand
OKI
Model
B721dn
Type
Owner's manual
Install additional RAM to increase the memory
capacity of your printer in cases such as if
occur. Your printer supports 512 MB RAM.
Note
� Use only genuine Oki Data products. The performance
cannot be guaranteed when other products are used.
� The static electricity may cause damage to the parts.
Discharge the static electricity in your body by touching
grounded metallic parts, etc. before work.
Memo
� For banner printing, installing additional memory is
recommended.
1 Turn off your printer, and then unplug all
the cables from the printer.
Reference
� "Turning Off the Power" P.29
2 Open the access cover (1) on the right
side of a printer.
1
3 Loosen the screw to remove the metal
plate (2).
2
4 Make sure the LED (3) indicated by the
arrow is unlit.
If it is lit, wait until it turns off.
3
5 Insert the additional RAM (4) into the
printer.
Note
� Be careful of the orientation of the additional RAM.
The additional RAM has small dents on its connector,
4
6 Insert the right side of the metal plate
(2) into the printer, close it, then secure
it by tightening the screw.
2
B721dn/B731dn/MPS5501 - Installing
Additional RAM
ENGLISH - 1
7 Close the access cover (1).
1
8 Plug the AC cable and removed cables
into your printer, and then turn on the
power switch.
9 Press the scroll button on the operator
panel.
10 Check that [ ] is selected
then press the <ENTER> button.
11 Press the scroll button several times
to select [System] then press the
<ENTER> button.
12 Press the scroll button several
times to select [RAM] then press the
<ENTER> button.
13 Check that the value of [RAM] has
increased.
- For memory expanded to 512 MB, it is
[768 MB].
Note
� If the value of [RAM] has not increased, turn off
your printer and unplug the AC cable and all the
cables, and then reinstall the additional RAM.
14 Press the <ON LINE> button.
ENGLISH - 2
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
PORTUGUÊS - 8
©2013 OKI Data Americas, Inc. All rights reserved. 59416501
1
7 Feche a tampa de acesso (1).
1
8 Ligue o cabo de alimentação de CA e
cabos desligados à impressora e, em
seguida, ligue o interruptor de corrente.
9 Prima o botão de deslocamento no
painel do operador.
10
e prima o botão <ENTER
(INTRODUZIR)>.
11 Prima várias vezes o botão de
deslocamento
para seleccionar
[System (System)] e depois prima o
botão <ENTER (INTRODUZIR)>.
12 Prima várias vezes o botão de
deslocamento
para seleccionar [RAM
(RAM)] e depois prima o botão <ENTER
(INTRODUZIR)>.
13 RAM (RAM)]
aumentou.
- Para memória expandida para 512 MB, é
[768 MB (768 MB)].
Nota
� Se o valor da [RAM] não tiver aumentado, desligue a
impressora e o cabo de alimentação de CA e todos os
outros cabos volte a instalar a RAM adicional.
14 Prima o botão <ON LINE (ONLINE)>.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

OKI B721dn Owner's manual

OKI
Brand
OKI
Model
B721dn
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents