Tenax 2A110097 Installation guide

Brand
Tenax
Model
2A110097
Type
Installation guide

This manual is also suitable for

Horizontal Installation
1. Install posts with pre-drilled holes for each layer
of net required during the growth cycle slightly
further apart than the width of your Tenax
Hortonova Trellis Net.
2. Attach a wooden crossbar between the posts at
the first level.
3. Secure the net to the post with nylon string.
4. Run a cable along the edge of the netting and
vertical support posts for added support.
5. Add additional layers of Hortonova Trellis Net as
the growth cycle progresses.
Hortonova Trellis Net
Installation Guide
TENAX CORPORATION - 4800 E. Monument Street - Baltimore, MD 21205 - phone 410-522-7000 - fax 410-522-3190 - www.tenaxus.com
Vertical Installation
1. Set supporting posts 25 feet apart
and stretch a cable from the top of
one post to the other.
2. Secure the net to the initial post with
a nylon string.
3. Attach netting along the cable by
running the nylon string trough the
top meshes.
Step 1 Step 2 Step 3
Step 4 Step 5
Step 1 Step 2 Step 3
  • Page 1 1

Tenax 2A110097 Installation guide

Brand
Tenax
Model
2A110097
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents