ALFI BRAND RAIN24S-BSS Installation guide

SHOWER HEAD INSTALLATION INSTRUCTION

Parts List

You Will Need The Following Tools

Ø6ｍｍ

Ax1

Bx1

Cx4

D１x4 D２x4

Ex4 Fx1

Template not included, create your own if needed.

According to drilling drawing sheet to (B) mark the 4 drilling positions ①, then use

the Ø6mm drill to drill holes on the wall according to the marked hole position.

Inset the plug(D2) into the hole, hold the fix base (C) use the tapping screw (D1)

through fix base(C) holes, tighten the tapping screw (D1) tighten the top shower

fixed bar(E) and the inlet hose (F) with the fix base (C)

Fixed the top shower with the top shower fixed bar (E) , then connect with the inlet

hose (F) .

The installation is completed.

This manual is also suitable for

Download PDF