www.Roseburg.com
www.Roseburg.com www.Roseburg.com
make shelving make shelving
Simple Simple
Roseburg’s shelving is manufactured with a
variety of core options and a finished
face, back and one edge.
RediShelf is produced unfinished or
with a UV cured painted surface on the
face and back or painted on the face and
back.
Melagard shelving is
manufactured with an extremely
durable, stain-resistant, thermally fused
laminate surface.
Roseburg’s shelving is manufactured with a
variety of core options and a finished
face, back and one edge.
RediShelf is produced unfinished or
with a UV cured painted surface on the
face and back or painted on the face and
back.
Melagard shelving is
manufactured with an extremely
durable, stain-resistant, thermally fused
laminate surface.
Best Selling Designs
▲ RediShelf ■ MelaGard
Other designs may be available upon request
Best Selling Designs
▲ RediShelf ■ MelaGard
Other designs may be available upon request
■
11 White TFL
■
11 White TFL
▲
M20 Natural Oak
▲
M20 Natural Oak
▲
M30 Rotary Oak
▲
M30 Rotary Oak
▲
M44 White Paint
▲
M44 White Paint
▲
M22 Umpqua Oak
▲
M22 Umpqua Oak
▲
F52 Skeleton Red Oak
▲
F52 Skeleton Red Oak
Raw Particleboard
Raw Particleboard
• CARB ULEF Exempt and CARB Phase
2 Certified options
• Eco-Certified Composite Core
• FSC Mix Credit Certified available
upon request
• Produced using 100% pre-consumer
recycled wood fiber
• CARB ULEF Exempt and CARB Phase
2 Certified options
• Eco-Certified Composite Core
• FSC Mix Credit Certified available
upon request
• Produced using 100% pre-consumer
recycled wood fiber
• Store indoors in a dry, clean, well-
ventilated area.
• Separate units with clean, dry spac-
ers of uniform thickness aligned
carefully. Use a minimum of three
spacers for panels up to 8’ long
and four or five spacers for longer
panels, to prevent warp.
• Avoid temperature and moisture
extremes.
• Keep units off the floor to prevent
moisture absorption.
• Before processing, allow panels to
equalize to surrounding moisture
and temperature conditions for a
minimum of 72 hours.
• Store indoors in a dry, clean, well-
ventilated area.
• Separate units with clean, dry spac-
ers of uniform thickness aligned
carefully. Use a minimum of three
spacers for panels up to 8’ long
and four or five spacers for longer
panels, to prevent warp.
• Avoid temperature and moisture
extremes.
• Keep units off the floor to prevent
moisture absorption.
• Before processing, allow panels to
equalize to surrounding moisture
and temperature conditions for a
minimum of 72 hours.
Dillard, OR
11-1/4” x 97”, 121”, 145”
15-1/4” x 97”, 121”, 145”
23-1/4” x 97”, 121”, 145”
Missoula, MT
11-1/4” x 97”, 121”, 145”
15-1/4” x 97”, 121”, 145”
23-1/4” x 97”, 121”, 145”
Taylorsville, MS
11-1/4” x 97”, 121”, 145”
15-1/4” x 97”, 121”, 145”
23-1/4” x 97”, 121”, 145”
Dillard, OR
11-1/4” x 97”, 121”, 145”
15-1/4” x 97”, 121”, 145”
23-1/4” x 97”, 121”, 145”
Missoula, MT
11-1/4” x 97”, 121”, 145”
15-1/4” x 97”, 121”, 145”
23-1/4” x 97”, 121”, 145”
Taylorsville, MS
11-1/4” x 97”, 121”, 145”
15-1/4” x 97”, 121”, 145”
23-1/4” x 97”, 121”, 145”
Certifications/Sustainability Certifications/Sustainability
Handling & Storage Handling & Storage
Manufacturing Locations Manufacturing Locations
3/4” is standard thickness, other thicknesses may be available upon request. 3/4” is standard thickness, other thicknesses may be available upon request.
Core Options Edge Profile Edge Treatment
UltraBlend Particleboard
Square Unfinished
SkyBlend Particleboard (ULEF)
Bullnose Putty Filled
MDF
Paint Ready Tape
MDF (NAF/ULEF)
Decorative Edge Band
Combination Fiber Core
Core Options Edge Profile Edge Treatment
UltraBlend Particleboard
Square Unfinished
SkyBlend Particleboard (ULEF)
Bullnose Putty Filled
MDF
Paint Ready Tape
MDF (NAF/ULEF)
Decorative Edge Band
Combination Fiber Core
Maintenance
Except for natural unfinished
particleboard, Roseburg
shelving can be easily cleaned
with warm water and mild
soaps. Do not use cleaners
containing abrasives, acids
or alkalis. Oversprays and
adhesives are easily removed
with solvents recommended for
such use. Damaged or chipped
melamine shelves can be
repaired in the same manner
as a high-pressure laminate.
Contact your local distributor
or Roseburg representative for
more information.
Machining
Sawing Tips
With the proper selection and
maintenance of power cutting
tools, Roseburg shelving can
be easily machined. Carbide-
tipped cutting tools are
recommended for sawing,
drilling, routing, joining,
fastening and edge-machining.
Remember: a portable 7-1/4”
saw can chip the upper side
of the panel (saw face down),
and a table or radial-arm saw
can chip the bottom edge (saw
face up). In all instances, the
saw should be maintained so
as to ensure low vibration and
smooth runout, clean collars,
and sharp, properly ground
teeth.
Maintenance
Except for natural unfinished
particleboard, Roseburg
shelving can be easily cleaned
with warm water and mild
soaps. Do not use cleaners
containing abrasives, acids
or alkalis. Oversprays and
adhesives are easily removed
with solvents recommended for
such use. Damaged or chipped
melamine shelves can be
repaired in the same manner
as a high-pressure laminate.
Contact your local distributor
or Roseburg representative for
more information.
Machining
Sawing Tips
With the proper selection and
maintenance of power cutting
tools, Roseburg shelving can
be easily machined. Carbide-
tipped cutting tools are
recommended for sawing,
drilling, routing, joining,
fastening and edge-machining.
Remember: a portable 7-1/4”
saw can chip the upper side
of the panel (saw face down),
and a table or radial-arm saw
can chip the bottom edge (saw
face up). In all instances, the
saw should be maintained so
as to ensure low vibration and
smooth runout, clean collars,
and sharp, properly ground
teeth.
P.O. Box 1088, Roseburg, OR 97470
Tel. 800-245-1115
Fax (541) 679-2543
www.Roseburg.com
P.O. Box 1088, Roseburg, OR 97470
Tel. 800-245-1115
Fax (541) 679-2543
www.Roseburg.com
Roseburg shelving is manufactured with a variety of cores and available either raw
or with a finished face, back and one edge. All components come in standard sizes
that are perfect for designing any storage application. Roseburg shelving is ready
to install. Each piece is precut to convenient widths and lengths for easy installa-
tion. The strength of composite panels creates a sturdy and durable product that is
perfect for a multitude of residential and commercial applications.
Roseburg shelving is manufactured with a variety of cores and available either raw
or with a finished face, back and one edge. All components come in standard sizes
that are perfect for designing any storage application. Roseburg shelving is ready
to install. Each piece is precut to convenient widths and lengths for easy installa-
tion. The strength of composite panels creates a sturdy and durable product that is
perfect for a multitude of residential and commercial applications.
Overview Overview
Roseburg shelving is available raw or in a variety of solid colors and woodgrains
that are exceptionally smooth, hard and have a durable surface that resists stains,
abrasions, moisture and fading.
Roseburg shelving is available raw or in a variety of solid colors and woodgrains
that are exceptionally smooth, hard and have a durable surface that resists stains,
abrasions, moisture and fading.
Surface Surface
SHELV-102015 SHELV-102015
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
American Pro Decor 5APD10626 Installation guide
-
Veranda 461877 Operating instructions
-
Builders Choice HDMWD1128X Installation guide
-
Veranda 461877 User guide
-
Unbranded 1605509 User manual
-
-
Xerox 003R97102 Datasheet
-
Flowserve NAF 8886 Series Maintenance And Installation Instructions
-
Fourstar Group 11211722W User manual
-
Oregon 2000 User manual
