RIDGID AM2286 User manual

Type
User manual

This manual is also suitable for

AM25600
AM22870
AM22860
AM25600
AM22870
AM22860
THREE SPEED
AIR MOVER
FOR QUESTIONS OR INFORMATION CONTACT US AT
1-800-4-RIDGID (1-800-474-3443) from the USand Canada
01-800-701-9811 from Mexico
www.RIDGIDvacs.com
Part No. SP7019 Printed in Mexico
OWNERS MANUAL
SAVE THIS MANUAL FOR FUTURE REFERENCE
WARNING:
To reduce the risk of injury, the user must read and understand the owner’s manual
before using this product.
!
Thank you for buying a RIDGID product.
Español - página 13
Français - page 25
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 1
2
Table of Contents
S
ection Page
Important Safety Instructions . . . . . . .2-3
Motor Specifications and Electrical
Requirements . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . 4
Unpacking and Checking Carton
Contents . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . .5-6
S
ection Page
Storage . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance . . . . . . . . . . . . . . . . . . . . . 8
Wiring Diagram . . . . . . . . . . . . . . . . . . . 9
User Servicing/Troubleshooting
Instructions . . . . . . . . . . . . . . . . . . 10
Repair Parts . . . . . . . . . . . . . . . . . . . . 11
Warranty . . . . . . . . . . . . . . . . . . . . . . . .12
IMPORTANT SAFETY INSTRUCTIONS
Safety is a combination of using common
sense, staying alert, and knowing how your
Air Mover works.
Safety Signal Words
DANGER: Indicates a hazardous
situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
When using your Air Mover, always follow
basic safety precautions including the
following:
WARNING
- To reduce the risk of fire,
electric shock, or injury:
Read and understand this manual and
all labels on the Air Mover before
operating.
Use only as described in this manual.
To reduce the risk of electric shock,
do not expose to rain, or immerse in
or use in standing water. Store and use
indoors only.
Use only with GFCI-protected outlets.
When storing, do not stack Air Movers
more than 2 units high.
Do not use an extension cord with this
Air Mover.
Electrical appliances can ignite
flammable vapors or dust. Do not use
near combustible liquids, gases,
or dusts.
!
!
!
!
Do not leave plugged into outlet when
not in use or when servicing. Turn off
before unplugging.
To reduce the risk of stirring up and
inhaling toxic vapors, do not use near
toxic or hazardous materials.
Never operate with safety grills removed.
This unit’s motor has an automatically-
operated thermal protective device
which may shut down the unit during
operation and can restart at any
moment. Unplug before servicing or
cleaning.
Do not use with solid state speed
control device.
This Air Mover is not intended for use by
persons (including children) with
reduced physical, sensory, or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
Do not unplug by pulling on cord.
To unplug, grasp the plug, not the cord.
Do not use with damaged cord, plug,
or other parts.
If your Air Mover is not working as it
should, has missing parts, has been
dropped, damaged, left outdoors,
or dropped into water, call customer
service.
Do not pull or carry by cord, use cord as
handle, close a door on cord, or pull
cord around sharp edges or corners.
Keep cord away from heated surfaces.
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 2
3
Motor Specifications and
Electrical Requirements
SAVE THIS MANUAL
This Air Mover is provided with a 3-speed,
115 volt, 60 Hz induction motor with a
grounding conductor. It is thermally
protected and will automatically shut down
if over-heated. Once it cools, the motor
will restart automatically if not unplugged.
In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current
to reduce the risk of electric shock.
CAUTION:
This Air Mover has an automatic
motor shutoff device; it may
restart without notice. To reduce
the risk of injury, unplug before
servicing.
Do not use an extension cord with
this fan.
D
o
n
o
t
r
u
n
co
r
d
u
n
d
e
r
ca
r
p
e
t
in
g
.
D
o
n
o
t
co
ve
r
co
r
d
w
it
h
t
h
r
o
w
r
u
g
s,
r
u
n
n
e
r
s,
o
r
simila
r
co
ve
r
in
g
s.
D
o
n
o
t
r
o
u
t
e
co
r
d
u
n
d
e
r
f
u
r
n
it
u
r
e
o
r
a
p
p
lia
n
ce
s.
Ar
r
a
n
g
e
co
r
d
a
w
a
y f
r
o
m
t
r
a
ff
ic a
r
e
a
a
n
d
w
h
e
r
e
it
w
ill n
o
t
b
e
t
r
ip
p
e
d
o
ve
r
.
D
o
n
o
t
h
a
n
d
le
p
lu
g
,
sw
it
ch
,
o
r
t
h
e
Air
Mo
ve
r
w
it
h
w
e
t
h
a
n
d
s.
O
b
se
r
ve
t
h
e
8
Amp
ma
ximu
m o
n
-
b
o
a
r
d
co
n
ve
n
ie
n
ce
o
u
tle
t r
a
tin
g
wh
e
n
in
te
r
co
n
n
e
ctin
g
u
n
its to
g
e
th
e
r.
Do
n
o
t p
u
t a
n
y o
b
je
ct in
to
a
ir
in
ta
ke
o
p
e
n
in
g
s.
Ke
e
p
h
a
ir, lo
o
se
clo
th
in
g
, fin
g
e
r
s,
a
n
d
a
ll p
a
r
ts o
f b
o
d
y a
wa
y fr
o
m
o
p
e
n
in
g
s a
n
d
mo
vin
g
p
a
r
ts.
Dir
e
ct a
ir
d
isch
a
r
g
e
o
n
ly a
t wo
r
k a
r
e
a
.
Do
n
o
t d
ir
e
ct a
ir
a
t b
ysta
n
d
e
r
s.
All d
isa
sse
mb
ly a
n
d
r
e
p
a
ir
s sh
o
u
ld
b
e
p
e
r
fo
r
me
d
b
y q
u
a
lifie
d
p
e
r
so
n
n
e
l.
D
o
n
o
t o
p
e
r
a
te
a
n
y fa
n
w
ith
a
d
a
ma
g
e
d
co
r
d
o
r
p
lu
g
. D
isca
r
d
fa
n
o
r
r
e
tu
r
n
to
a
n
a
u
th
o
r
ize
d
s
e
r
v
ice
fa
cility
fo
r
e
x
a
min
a
tio
n
a
n
d
/o
r
r
e
p
a
ir.
Observe the following warnings that
appear on the motor housing of your
Air Mover:
CAUTION:
For dusty operations, wear dust mask.
Do not move or carry Air Mover when it
is operating.
Only operate on a level and stable
surface to prevent it from falling and
possibly causing injury or damage to unit.
!
WARNING: To reduce the risk of
electric shock, connect only to a
GFCI protected outlet. Do not expose
to water or rain. Indoor use only.
!
!
WARNING: Do not exceed
8 Amps through the on-board
convenience outlets.
!
WARNING: TO REDUCE THE RISK
OF TIP-OVER DURING STORAGE,
STACK 2-HIGH ONLY.
!
This Air Mover is equipped with an electric
cord having an equipment grounding
conductor and a grounding plug. The plug
must be plugged into a matching outlet
that is properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 3
Introduction
Air Movers are designed to move large volumes of air. They are used to dry wet carpets,
floors and furniture. They may also be used for ventilation.
Un
p
ac
k
in
g
a
n
d
Ch
e
ck
in
g
Ca
r
to
n
Co
n
ten
ts
A
M2560
Only:
If
your
A
ir
Mover
includes
a
retractable
handle,
it
is
packaged
in
a
locked dow
nw
ard position.
Carrying Handle
Recessed Stacking
Pads (4)
Air
Outlet
Cord Wra
p
Are
a
3-Speed
ON/OFF Switch
Foot Bumpers
(4 on the bottom)
P
ul
l
Handle
(
A
M
2560 O
nly)
Wheels
(AM2560 Only)
Inlet Grill with
Convenience
Outlets
(AM2287 Only)
4
Retractab
l
e
Han
d
l
e
Un
l
o
cked
H
andle D
own P
osition (A
M2560 O
nly)
H
andle U
p P
osition (A
M2560 O
nly)
C
ar
ef
ul
l
y
unpac
k
and
i
ns
pec
t
y
our
Ai
r
M
ov
er
.
C
al
l
1-
800-
4-
R
I
D
G
I
D
(
1-
800-
474-
3443)
or
E
-mail us at info@
R
ID
GID
vacs.com if any parts are damaged or missing.
Retractab
l
e
Han
d
l
e
L
o
cked
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 4
5
Operation
Place Air Mover in desired operating position (Your Unit May Not Be As Illustrated):
Foot
Bumpers
Floor & Carpet
90° Ceilings & Ventilation
45° Walls & Ventilation
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 5
Operation (continued)
6
Air Mover Interconnection
RIDGID Air Movers (AM22870) can be
interconnected in series using the
AM22870 convenience outlets. If utilizing
the series interconnection feature, only
use Air Movers that total less than the
recommended 7.9 Amp maximum
convenience outlet rating. The 8 Amp on-
board circuit breaker will allow up to two
(2) additional RIDGID Air Movers to run on
the first Air Mover at the same time.
NOTE: This Air Mover AM22870 is
equipped with convenience outlets with an
on-board 8 Amp circuit breaker. If the
convenience outlet overloads, the circuit
breaker will trip. If the circuit breaker does
trip, turn the switch to the off position and
unplug all units then press the circuit
breaker reset button. Plug the units back
into the power source. The on-board
convenience outlets on the Air Mover will
be actively powered when the Air Mover
is plugged in and the circuit breaker is
properly reset.
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 6
7
When stacking units, position the four foot
bumpers on the recessed stacking pads.
Recessed
Stacking
Pads (4)
Foot
Bumpers
(4 on bottom
of unit)
The units conveniently “stack” for storage,
as shown.
Storage
CAUTION: Do not operate
Air Mover when stacked on top of
each other.
Do not stack more than 2 high.
Air Mover
Units Stacked
2 High Only
Air Mover
Units Stacked
2 High Only
!
PREFERRED POSITION
ALTERNATE POSITION
(Your Unit May Not Be As Illustrated)
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 7
8
Maintenance
Cord Ma
intena
nc
e
W
h
e
n
u
se
i
s co
m
p
l
e
t
e
,
u
n
p
l
u
g
t
h
e
co
r
d
a
n
d
w
r
a
p
i
t
a
r
o
u
n
d
t
h
e
co
r
d
w
r
a
p
a
r
e
a
a
s
sh
o
w
n
.
I
f
t
h
e
p
o
w
e
r
co
r
d
i
s d
a
m
a
g
e
d
,
i
t
m
u
st
b
e
r
e
p
l
a
ce
d
b
y
t
h
e
m
a
n
u
f
a
ct
u
r
e
o
r
t
h
e
i
r
s
e
rv
i
c
e
a
g
e
n
t
o
r
b
y
q
u
a
l
i
f
i
e
d
p
e
r
so
n
n
e
l
i
n
o
r
d
e
r
t
o
r
e
d
u
ce
t
h
e
r
i
sk
o
f
acci
dent
.
Stora
ge
B
ef
or
e
st
or
i
ng
your
A
i
r
M
over
,
t
he
cor
d
sh
o
u
l
d
b
e
w
ra
p
p
e
d
a
ro
u
n
d
th
e
u
n
i
t.
The A
i
r
M
over
shoul
d be st
or
ed i
ndoor
s.
Cle
a
ning Your
Air Mov
e
r
If th
e
p
o
l
yp
ro
p
yl
e
n
e
h
o
u
si
n
g
b
e
co
m
e
s
soi
l
ed i
t
m
ay be w
i
ped of
f
w
i
t
h a dam
p
cl
ot
h.
Wheels
(AM2560 O
nl
y)
I
f
your
wheels
are
noisy,
you
may
put
a
drop of
oil on t
he roller shaf
t
t
o make t
hem
quiet
er
.
C
ord
C
o
rd
W
ra
p
A
re
a
WA
R
N
I
N
G
:
A
f
t
e
r s
e
rv
i
c
i
ng,
a
ny
s
a
fe
ty
d
e
v
i
c
e
(i
n
c
l
u
d
e
s
g
r
i
l
l
e
s
,
i
mpe
l
l
e
r
,
e
t
c
.
)
s
houl
d
be
re
i
ns
t
a
l
l
e
d
or re
mount
e
d.
!
(Your Unit May Not Be As Illustrated)
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 8
9
Wi
r
i
ng D
ia
gr
a
m
s
R
ED
(
L
O
W
)
BL
U
E
(
MED
)
BL
AC
K
(
H
I
)
MO
T
O
R
G
RE
E
N
WHI
TE
SWI
TCH
P
O
WER
CO
RD
BLACK
AM2560 & AM2286:
AM2287:
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 9
10
U
s
e
r
Se
r
v
i
c
i
ng / T
r
oubl
e
s
hooti
ng
I
ns
tr
uc
ti
ons
P
R
O
B
LE
M
C
A
U
S
E
S
O
LU
TIO
N
U
nit w
ill not run.
1. N
o pow
er to unit.
1.
P
lug unit in. C
heck circ
uit break
er.
2. S
w
itch not on.
2.
P
lace in “O
N
” pos
ition.
3. S
w
itch is faulty.
3.
R
eplace s
w
itc
h.
4. Faulty/broken cord or
4.
P
erform continuity
check, us
ing
motor w
ire.
volt/amp meter.
U
nit runs but air
1. U
nit has been s
everely jolted
1.
R
emove motor and replac
e
mov
er mak
es
c
aus
ing blow
er w
heel to rub
damaged motor if necessary.
loud sc
raping
against housing.
noise.
2. U
nit has been s
everely jolted
2.
R
eplace blow
er w
heel.
causing housing to deform.
U
nit runs but
1. S
evere jolt has bent motor
1.
R
emov
e and replace motor.
vibrates
shaft causing unit to be out of
exc
essiv
ely.
balance.
2. B
low
er w
heel blade damaged.
2.
R
eplace blow
er w
heel if necessary.
3. D
irt build up on one side of
3.
C
lean blow
er w
heel blades.
A
ir Mov
er blow
er w
heel.
U
nit runs
but
1. B
low
er w
heel is
jammed
1.
A
djust and replace blow
er w
heel
blow
er w
heel
against housing.
if neces
sary.
does not turn.
2. Capac
i
tor wi
re has
broken/
2.
Repair/replac
e motor
come l
oose, c
apaci
tor has
if necessary.
fai
l
ed.
3. Housing has been damaged
3.
Replace unit as necessary.
such that i
t presses on blower
wheel
.
Uni
t runs
bri
efl
y
,
1. M
otor beari
ngs are fai
l
ing or
1.
Replace motor.
then s
huts
off
m
otor has
devel
oped an
on overl
oad.
i
nternal
el
ec
tri
c
al
faul
t.
2.
Intak
e gril
le and/or exhaus
t
2.
Remove obs
truc
tion.
grille is obstructed.
Convenience
1. No power to unit.
1.
Plug unit in.
outlet not
working.
2.
Convenience outlet circuit
2.
Reset circuit breaker.
(if equipped)
breaker not reset.
!
WA
R
N
I
N
G
:
U
npl
ug be
f
ore
a
ny
di
s
a
s
s
e
mbl
y
or s
e
rv
i
c
i
ng.
!
WA
R
N
I
N
G
:
A
l
l
di
s
a
s
s
e
mbl
y
a
nd re
pa
i
rs
s
houl
d be
pe
rf
orme
d by
qua
l
i
f
i
e
d
pe
rs
onne
l
.
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 10
8
7
1
9
4
4
6
AM
2
2
87
O
n
l
y
AM
2
5
60
O
n
l
y
AM
2
5
6
0
O
n
l
y
A
M
2
2
8
7
O
n
l
y
4
4
12
2
5
3
10
1
1
Repair Parts
Three Speed Air Mover
Model Numbers AM22860, AM22870 or AM25600
RIDGID parts are available on-line at www.RIDGIDparts.com
Always order by Part Number - Not by Key Number
11
Key Part
No. Number Description
1 510141 Switch & Knob
2 833658 Grille, Inlet
AM2560 & AM2286
3 510551 Grille, Inlet (with Convenience
Outlets & Hardware), AM2287
4 833690 Foot Bumpers (4 pack)
5 833675 Cord with Plug
Key
Part
No.
Number
Description
6
841368
Cord with Plug, AM2287
7
833674
Motor
8
833659
Grille, Exhaust
9
833660
Blower Wheel
10
510140
Wheel Assembly, AM2560
11
833691
Pull Handle, AM2560
12
SP7019
Owner’s Manual
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 11
What is covered
RIDGID
®
tools are warranted to be free of defects in workmanship and material.
How long coverage lasts
This warranty lasts for the lifetime of the RIDGID
®
tool. Warranty coverage ends when the product
becomes unusable for reasons other than defects in workmanship or material.
How can you get service
To obtain the benefit of this warranty, deliver via prepaid transportation the complete product to
RIDGE TOOL COMPANY, Elyria, Ohio, or any authorized RIDGID
®
INDEPENDENT SERVICE
CENTER. Pipe wrenches and other hand tools should be returned to the place of purchase.
What we will do to correct problems
Warranted products will be repaired or replaced, at RIDGE TOOL’s option, and returned at no
charge; or, if after three attempts to repair or replace during the warranty period the product is still
defective, you can elect to receive a full refund of your purchase price.
What is not covered
Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. RIDGE
TOOL shall not be responsible for any incidental or consequential damages.
How local law relates to the warranty
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you
may also have other rights, which vary, from state to state, province to province, or country to
country.
No other express warranty applies
This FULL LIFETIME WARRANTY is the sole and exclusive warranty for RIDGID
®
products.
No employee, agent, dealer, or other person is authorized to alter this warranty or make any other
warranty on behalf of the RIDGE TOOL COMPANY.
Part No. SP7019 Form No. SP7019 Printed in Mexico 02/17
Stock No. AM2286, AM2287, AM2560
Model No. AM22860, AM22870, AM25600
Model and serial number may be found on the back of the unit.
You should record both model and serial numbers in a safe place for future use.
Symbol of Quality, Durability and
Dependability
c 2017 Emerson
www.RIDGID.com
FO
R QUESTIONS O
R INFO
RM
ATION CONTACT US AT
1-800-4-RIDG
I
D (1-800-474-3443) from the US and Canada
01-800-701-9811 from Mexico
www.
RI
DGI
Dvacs.com
Please ha
ve
your Model N
umber and Seri
a
l Number on hand when calling.
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 12
21
R
ED
(
L
O
W
)
BL
U
E
(
MED
)
BL
AC
K
(
H
I
)
MO
T
O
R
G
RE
E
N
WHI
TE
SWI
TCH
P
O
WER
CO
RD
BLACK
AM2560 & AM2286:
AM2287:
Diagramas de cableado
VERDE
BLANCO
INTERRUPTOR
NEGRO
CABLE DE
ALIMENTACION
MOTOR
ROJO (BAJA)
AZUL (INTERMEDIA)
NEGRO (ALTA)
VERDE
BLANCO
INTERRUPTOR NEGRO
CABLE DE
ALIMENTACION
PROTECTOR DE
CIRCUITO DE 8 A MÁX.
TOMACORRIENTE 1 TOMACORRIENTE 2
MOTOR
ROJO (BAJA)
AZUL (INTERMEDIA)
NEGRO (ALTA)
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 21
33
R
ED
(
L
O
W
)
BL
U
E
(
MED
)
BL
AC
K
(
H
I
)
MO
T
O
R
G
RE
E
N
WHI
TE
SWI
TCH
P
O
WER
CO
RD
BLACK
AM2560 et AM2286:
AM2287 :
VERT
BLANC
COMMUTATEUR
NOIR
CORDON
D’ALIMENTATION
MOTEUR
ROUGE (FAIBLE)
BLEU (MOYEN)
NOIR (ÉLEVÉ)
VERT
BLANC
COMMUTATEUR NOIR
CORDON
D’ALIMENTATION
PROTECTEUR
DE CIRCUIT
8 A MAX.
PRISE DE COURANT 1 PRISE DE COURANT 2
MOTEUR
ROUGE (FAIBLE)
BLEU (MOYEN)
NOIR (ÉLEVÉ)
Schémas de câblage
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:20 AM Page 33
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

RIDGID AM2286 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages