Kohler K-2979-8-0 Specification

Type
Specification

This manual is also suitable for

Kohler K-2979-8-0 is a vanity-top bathroom sink made of vitreous china. It is rectangular in shape and has an 8-inch centerset. The sink has a single bowl with a 5-1/4" water depth and a 10-1/2" width. It has three deck holes for a faucet and a 1-3/4" drain hole. The sink is designed to be installed on a vanity or countertop and comes with a template for easy installation. It is also designed to work with a pop-up drain, although some bending of the drain linkage may be necessary for proper reach to the faucet lift rod.

Kohler K-2979-8-0 is a vanity-top bathroom sink made of vitreous china. It is rectangular in shape and has an 8-inch centerset. The sink has a single bowl with a 5-1/4" water depth and a 10-1/2" width. It has three deck holes for a faucet and a 1-3/4" drain hole. The sink is designed to be installed on a vanity or countertop and comes with a template for easy installation. It is also designed to work with a pop-up drain, although some bending of the drain linkage may be necessary for proper reach to the faucet lift rod.

Features
Vitreous china.
Vanity-top.
Rectangular basin.
With overflow.
8-inch centers.
Coordinates with other products in the Tresham collection.
Also installs to 24" (610 mm) x 18" (457 mm) vanities.
25-7/16" (646 mm) x 19-1/16" (484 mm) x 7-7/8" (200 mm)
Recommended Accessories
K-8998 P-Trap
Codes/Standards
ASME A112.19.2/CSA B45.1
KOHLER
®
One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
Ice Grey95
SandbarG9
Mexican Sand33
CashmereK4
Thunder Grey58
Black Black7
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-12-2018 04:20
Tresham
®
Vanity-top Bathroom Sink
K-2979-8
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
SingleBowl configuration:
NOTICE: Countertop manufacturer or cutter must
use the cut-out template provided with the
ITBInstallation:
Length: 19-1/16" (484 mm)
Width: 10-1/2" (267 mm)
Water depth: 5-1/4" (133 mm)
Bowl area (Only):
product, or a current one provided by Kohler (call
1-800-4KOHLER). Kohler is not responsible for
cutout errors when incorrect cut-out template is
used.
3Number of deck holes:
1-3/8" (35 mm)Faucet hole(s):
When installing a pop-up drain to this bathroom
sink, it may be necessary to bend the drain
linkage to allow proper reach to the faucet lift rod.
1-3/4" (44 mm)Drain hole:
1162722-7, required, includedTemplate:
NOTE: This bathroom sink is also designed for
installation to the K-2604 vanity or with any other
24" (610 mm) x 18" (457 mm) vanity
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-12-2018 04:20
Tresham
®
Vanity-top Bathroom Sink
K-2979-8
  • Page 1 1
  • Page 2 2

Kohler K-2979-8-0 Specification

Type
Specification
This manual is also suitable for

Kohler K-2979-8-0 is a vanity-top bathroom sink made of vitreous china. It is rectangular in shape and has an 8-inch centerset. The sink has a single bowl with a 5-1/4" water depth and a 10-1/2" width. It has three deck holes for a faucet and a 1-3/4" drain hole. The sink is designed to be installed on a vanity or countertop and comes with a template for easy installation. It is also designed to work with a pop-up drain, although some bending of the drain linkage may be necessary for proper reach to the faucet lift rod.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI