Features
•
Two 110v GFCI Outlets for powering or charging appliances.
•
On-Off switch on face of unit for easy control.
•
Can be installed in the back of the drawer without reducing
drawer extension
•
Fits all Tailored Vanity Collection drawers (except split-top
drawer).
•
Plug and play design allows unit to be installed as an accessory
in drawer and plugged into GFCI protected outlet - no hardwiring
into the home neccessary.
Codes/Standards
EPA TSCA Title VI
CARB P2
KOHLER
®
One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
BlackCA3
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 15:55
Tailored
®
Vanity Collection
In-drawer Electrical Outlet
K-99566
5"
Notes
Required Electrical Service
Install this product according to the installation
guide.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Power cord is 72" (1829 mm) in length.
120 V, 15 A
Provide a grounded electrical outlet within close
proximity to the electrical accessory.
Technical Information
All product dimensions are nominal.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 15:55
Tailored
®
Vanity Collection
In-drawer Electrical Outlet
K-99566
/