CipherLab 8020 User manual

FORGE Batch Application Generato

r

8000 / 8300 / 8400 / 8500 Series

Mobile Computers

DOC Version 2.19

The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided

under a license agreement containing restrictions on use and disclosure and is also

protected by copyright law. Reverse engineering of the software is prohibited.

Due to continued product development this information may change without notice. The

information and intellectual property contained herein is confidential between CIPHERLAB

and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find

any problems in the documentation, please report them to us in writing. CIPHERLAB

does not warrant that this document is error-free.

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photocopying,

recording or otherwise without the prior written permission of CIPHERLAB CO., LTD.

For product consultancy and technical support, please contact your local sales

representative. Also, you may visit our web site for more information.

The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

The editorial use of these names is for identification as well as to the benefit of the

owners, with no intention of infringement.

CIPHERLAB CO., LTD.

Website:

http://www.cipherlab.com

Version Date Notes

2.19b Oct. 20, 2009

 Modified: 5.1.5 Upload & Download Settings — Buzzer Volume

changed to LARGE_VOL

2.19a Oct. 12, 2009

 New: support 8400-2D — Chinese 25, Matrix 25, Picklist Mode, 1D

Inverse, 2D Inverse

2.18 June. 25, 2009

 Modified: section – 3.2.4 “DBF File Location” and section 6.3.3

“DAT File Location” features are added.

 Modified: section 5.1.5 – add DBF Converter, download and upload

information

2.17 May. 07, 2009

 Modified: “Convert to 8300” and other 8400 supported features

are added.

2.16 Jan. 19, 2009

 Modified: 8400 supported features are added.

2.15 Nov. 26, 2008

 Applied new GUI screen shots and modified the relative contents.

2.14 July 30, 2008

 Modified: sections 6.3 –

add “Use Large Font for Data Browsing”

for AG8000 and AG8300

 Modified: Appendix II~III support replacement of EAN-128 field

separator for all scan engines

2.13 Jun. 26, 2008

 Modified: section 1.6 Record –

add “remove from lookup” and

“save & remove” options

 Modified: section 3.11 Action When the Input Data Has No Match

– add “remove from lookup” and “save & remove” options

 Modified: section 4.1.2 RFID Reader –

Automatically enabled after

initialization (checkbox removed from UI)

 New: Long Range Laser option available for 8300

2.12 Nov. 06, 2007

 Modified: section 4.1.2 RFID Reader –

RFID tags in proximity will

be read automatically by 8300/8500 when RFID reader is enabled

2.11 Oct. 18, 2007

 Modified: Features

2.10 Sep. 19, 2007 New Word template applied

2.07 June 20, 2006

 Company name changed to CIPHERLAB CO., LTD. since April 2006

 Modified: section 5.3 Barcode & Parameters

2.06 Apr. 14, 2006

 Modified: section 1.2.2 – Font_12x12 not supported

 Modified: sections 5.1 & 5.2.6

 Modified: sections 6.2, 6.4 & 6.5

2.05 Apr. 10, 2006 AG for CPT-8500 is included

RELEASE NOTES

CONTENTS

RELEASE NOTES .............................................................................................................................. - 3 -

INTRODUCTION.................................................................................................................................... 1

Features............................................................................................................................................. 2

Installing from the Product CD ......................................................................................................... 3

Getting Started .................................................................................................................................. 4

Command Bar .............................................................................................................................. 7

Toolbar Menu .............................................................................................................................11

Application Template .................................................................................................................11

Program Simulation ...................................................................................................................12

Localization.................................................................................................................................14

FORM .................................................................................................................................................15

1.1 To denominate a form..............................................................................................................16

1.2 Properties..................................................................................................................................16

1.2.1 Esc.....................................................................................................................................16

1.2.2 Next...................................................................................................................................16

1.2.3 Record...............................................................................................................................17

1.3 Font Size....................................................................................................................................18

1.4 Lookup (File) .............................................................................................................................18

1.5 Date & Time Stamp ..................................................................................................................19

1.6 Branch .......................................................................................................................................19

1.7 Reset Current Form ..................................................................................................................20

1.8 Data Type ..................................................................................................................................21

1.8.1 Nil ......................................................................................................................................21

1.8.2 Text....................................................................................................................................22

1.8.3 Letter.................................................................................................................................22

1.8.4 Alphameric........................................................................................................................22

1.8.5 Integer...............................................................................................................................22

1.8.6 Real ...................................................................................................................................22

1.8.7 Auto (+/-) ..........................................................................................................................23

1.8.8 Extension ..........................................................................................................................24

1.8.9 Pass down ........................................................................................................................24

1.8.10 Boolean ..........................................................................................................................25

1.8.11 Lookup............................................................................................................................25

1.8.12 Fixed Data ......................................................................................................................25

1.8.13 Prompt............................................................................................................................25

1.8.14 Pause..............................................................................................................................26

1.8.15 Counter...........................................................................................................................26

1.9 Prompt.......................................................................................................................................26

1.10 Input Type ...............................................................................................................................26

1.11 Minimum Length ....................................................................................................................27

1.12 Maximum Length....................................................................................................................27

1.12.1 Input via Barcode/RFID Reader....................................................................................27

FORGE Batch Application Generator User Guide

1.12.2 Input via Keypad ............................................................................................................

27

1.13 Variables .................................................................................................................................28

1.13.1 Lookup (Field) ................................................................................................................28

1.13.2 Variables.........................................................................................................................29

1.14 More........................................................................................................................................ 29

1.14.1 Field Data .......................................................................................................................29

1.14.2 Barcode Input.................................................................................................................31

MENU .................................................................................................................................................33

2.1 To denominate the menu.........................................................................................................33

2.2 Properties..................................................................................................................................34

2.2.1 Menu Caption ...................................................................................................................34

2.2.2 ESC.................................................................................................................................... 34

2.3 Font Size....................................................................................................................................34

2.4 Data ...........................................................................................................................................34

2.4.1 Save Caption ....................................................................................................................34

2.4.2 Save Selected Item ..........................................................................................................34

2.4.3 Pass Down ........................................................................................................................34

2.5 Save forms specified in all menus to separate files ..............................................................35

2.6 Item Name ................................................................................................................................35

2.7 Next ...........................................................................................................................................35

2.8 Reset Current Menu .................................................................................................................36

LOOKUP..............................................................................................................................................37

3.1 To denominate a lookup file ....................................................................................................38

3.2 Field Property............................................................................................................................38

3.2.1 Number of Fields..............................................................................................................38

3.2.2 Fixed Length .....................................................................................................................38

3.2.3 Delimiter ...........................................................................................................................38

3.2.4 DBF File Location ............................................................................................................. 39

3.3 Lookup Data..............................................................................................................................39

3.3.1 Only Read Data Once.......................................................................................................39

3.3.2 Lookup Data Can Be Uploaded .......................................................................................39

3.4 Action When the Input Data Has No Match ............................................................................39

3.4.1 Continue ...........................................................................................................................39

3.4.2 Show Warning Message ..................................................................................................40

3.4.3 Insert to Lookup File ........................................................................................................40

3.4.4 Show Warning Message & Insert ....................................................................................40

3.4.5 Clear the Screen...............................................................................................................40

3.4.6 Show Warning & Clear Screen ........................................................................................40

3.5 Offset.........................................................................................................................................40

3.6 (Max) Length .............................................................................................................................41

3.7 Key Field....................................................................................................................................41

3.8 Action When the Format of Record Is Wrong..........................................................................41

3.8.1 Stop the Download Process ............................................................................................41

3.8.2 Truncate / Reformat the Record.....................................................................................42

3.8.3 Skip the Record................................................................................................................42

3.9 Reset Current Lookup File .......................................................................................................42

FORGE Batch Application Generator User Guide

SYMBOLOGY ......................................................................................................................................

43

4.1 Reader Settings ........................................................................................................................43

4.2 Code ID......................................................................................................................................43

4.3 Reset ......................................................................................................................................... 44

4.4 Barcode & Parameters.............................................................................................................44

SETTINGS...........................................................................................................................................45

5.1 Initial Setting ............................................................................................................................. 45

5.1.1 Data Manipulation ...........................................................................................................45

5.1.2 Keypad & LCD ..................................................................................................................46

5.1.3 Notification .......................................................................................................................46

5.1.4 Reader Option ..................................................................................................................47

5.1.5 Upload & Download Settings...........................................................................................48

5.1.6 Baud Rate & Modem Speed............................................................................................52

5.1.7 Reset Settings ..................................................................................................................53

5.2 Function Key Setting ................................................................................................................53

5.3 Security Setting.........................................................................................................................54

STARTUP ............................................................................................................................................ 57

6.1 Application Start From..............................................................................................................57

6.2 Prompt Font Size ......................................................................................................................58

6.3 Data Field Properties................................................................................................................58

6.3.1 Number of Delimiter ........................................................................................................58

6.3.2 Browse data font size ......................................................................................................58

6.3.3 DAT File Location.............................................................................................................. 58

6.4 Redefine Prompts and Messages ...........................................................................................59

6.5 Import Prompts and Messages................................................................................................59

6.6 Reset Prompts and Messages to default................................................................................59

SCAN ENGINE SETTINGS................................................................................................................... 61

Symbologies Supported ..................................................................................................................61

RFID Tags Supported ......................................................................................................................63

CCD/LASER SCAN ENGINE................................................................................................................ 65

Reader Settings Table.....................................................................................................................65

Symbology Settings Table...............................................................................................................66

LR/ELR LASER SCAN ENGINE ........................................................................................................... 71

Reader Settings Table.....................................................................................................................71

Symbology Settings Table...............................................................................................................71

2D SCAN ENGINE...............................................................................................................................75

Reader Settings Table.....................................................................................................................75

Symbology Settings Table...............................................................................................................76

1

FORGE Application Generator for 8000/8300/8400/8500 Series Mobile Computers,

featuring easy-to-use and quick-to-apply, is designed for the users to develop custom

templates for the use with AG runtime preloaded on the mobile computers. Users are

then able to define their own data collection templates on any desktop computer without

spending time writing any program code.

FORGE Application Generator is used to develop applications for many purposes, such as

—

 Receiving in Retail

 Price Check

 Product labeling & Tracking

 Shelf Product Replenishment

 Mobile Point of Sale (POS)

 Mobile Inventory Management

 Order Picking & Staging

 Work-In-Process Tracking

 Material Flow Control

 Transportation & Distribution

 Warehousing

 Asset Management

FORGE Application Generator presents itself as a miniature image of the mobile

computer. It simulates the program’s running sequences on the actual mobile computer,

and therefore, allows you to design a new application on screen in minutes. After having

configured and saved your template, download the application template file and lookup

file(s) to the mobile computer. When running the AG runtime on the mobile computer,

data collection can commence immediately by making use of the template downloaded.

This manual serves to provide comprehensive understanding of FORGE Application

Generator for 8000/8300/8400/8500 Series Mobile Computers, and helps define custom

template for a specific application. We recommend that you read the document

thoroughly before use and keep it at hand for quick reference.

Thank you for choosing CipherLab products!

INTRODUCTION

2

FORGE Batch Application Generator User Guide

FEATURES

 Definition of program flow

 Editing of screens and data

 Managing barcode reader and RFID reader

 Font size options and program localization

 Simple program simulation for debugging

 Password-protected user settings to prevent unauthorized user intervention

 Hot key selection for tasks or user settings’ menus

 Definition of system initial settings for a quick start

 Easy cloning by downloading the template file

 Integrated interface for downloading lookup files and uploading data

3

Introduction

INSTALLING FROM THE PRODUCT CD

Data collection mainly consists of three elements: input (scanning or key-in), data

processing, and output (or updating database). FORGE Application Generator for

8000/8300/8400/8500 Series Mobile Computers is specifically designed to deal with the

sequences of data processing inside the mobile computers.

1) Install FORGE Application Generator for 8000/8300/8400/8500 Series Mobile

Computers from the 7 & 8 Product CD.

If you did not change to install to a different folder, it will install the application to the

default directory “C:\CipherLab\Forge\Batch\”.

 Shortcuts to the AG programs are created and placed in Start > Programs >

CipherLab > Forge > Batch > Application Generator (see table 1 below).

 Shortcuts to the AG utilities are created and placed in Start > Programs >

CipherLab > Forge > Batch > Utility (see table 2 below).

2) Download the AG runtime program (U8*.SHX) and desired font file (.SHX) to the

mobile computer via the “Program Load” utility accessible in Start > Programs >

CipherLab > Forge > Batch > Utility (see table 2 below).

On the mobile computer, press [7] + [9] + [Power] simultaneously to enter System

Menu > Load Program.

Table 1

Shortcut Name of AG Program

AG Program Applied to

8 Series Batch AG ForgeAG.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

Table 2

Shortcut Name of Utility

Program Applied to

AG Load AG_Load.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

Download Lookup DLookup.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

Data Read Data_Read.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

Program Load ProgLoad.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

MobileLink MobileLink.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

Simulator Simulator.exe 8000, 8001, 8020, 8021, 8300, 8400, 8500

DBFConvert DBF_Converter.exe

8400

Note: You may use the Batch AG program and runtime with any wireless mobile

computer if wireless connectivity is not desired. Especially, when you use a

Bluetooth mobile computer, say 8062 or 8330, you will be able to choose

Bluetooth SPP for download and upload.

4

FORGE Batch Application Generator User Guide

GETTING STARTED

1) Run the ForgeAG program (ForgeAG.exe) on your computer. The ForgeAG UI Frame

pops up and the Command Menu appears as shown below.

Design Application Template

2) Click [Startup] to start with a new or the latest application template.

3) Upon completion, click [File > Save] or [File > Save As] to save the current editing

template to file (*.AGX for 8000/8300/8400/8500) and close the editing window.

5

Introduction

Note: For initial downloading of the application template, you must manually configure the download

settings on the mobile computer. Then, the upload and download settings on the

mobile computer will be overwritten by the settings of the application template

after downloading.

4) Establish a proper connection between your mobile computer and the server.

Download Application Template File

5) Click [Tools > Send Application] to download the template file (*.AGX) to the mobile

computer.

On the mobile computer, select [3. Utilities] > [6. Load Application] to download the

template file. After downloading, the main menu is displayed.

Warning: In the application template file, the upload and download settings for the

mobile computer and PC side must match.

Download Lookup Files

6) If any lookup file is specified in use in the template file, you must download the

lookup file(s). Refer to section

1.4 Lookup (File) and 3 Lookup.

Click [Tools > Send Lookup] to download up to three lookup files for use.

Alternatively, you may use the "DLookup.exe" utility to download text files for

reference purpose.

On the mobile computer, select [3. Utilities] > [8. Load Lookup File] to download the

associated lookup file(s). After downloading, the main menu is displayed.

Collect Data

7) On the mobile computer, select [1. Collect Data] to start with the data collection task.

Upload Data

8) Click [Tools > Get File via Direct-Link] or [Tools > Get File via Net] to receive the

collected data (.txt) from the mobile computer.

On the mobile computer, select [2. Upload Data] to send the collected data back to

the server.

 Data file(s)

6

FORGE Batch Application Generator User Guide

 Lookup file(s), if any in use

 All (one by one)

 All (append), that is, all-in-one

Refer to section

1.2.3 Record and 3.3.2 Lookup Data Can Be Uploaded.

If no lookup files are defined on both the Form and Lookup property pages, you may

receive data from the mobile computer via the "Data Read" utility.

Manipulate Data

9) On the mobile computer, select the following submenus if you want to edit the

collected data –

[3. Utilities] > [2. Browse Data]

[3. Utilities] > [3. Delete Data] (Refer to section 5.1.1

Data Deletion.)

7

Introduction

COMMAND BAR

The Command Bar offers the following commands.

CipherLab 8020 User manual

This manual is also suitable for

CipherLab 8020 User manual

Related papers

Other documents