Intermec Oracle-Ready CK31 Supplementary Manual

Type
Supplementary Manual

This manual is also suitable for

Intermec Oracle-Ready CK31 is a rugged handheld computer designed to withstand the demands of harsh environments. With its IP64 rating, it is resistant to dust and water, making it ideal for use in warehouses, manufacturing plants, and other industrial settings. The CK31 is also MIL-STD-810G certified, meaning it can withstand drops, vibrations, and extreme temperatures.

In addition to its rugged design, the CK31 is also equipped with a powerful processor and a large touchscreen display. This makes it ideal for running demanding applications, such as inventory management, asset tracking, and work order management. The CK31 also has a built-in barcode scanner, which makes it easy to capture data from barcodes and RFID tags.

Intermec Oracle-Ready CK31 is a rugged handheld computer designed to withstand the demands of harsh environments. With its IP64 rating, it is resistant to dust and water, making it ideal for use in warehouses, manufacturing plants, and other industrial settings. The CK31 is also MIL-STD-810G certified, meaning it can withstand drops, vibrations, and extreme temperatures.

In addition to its rugged design, the CK31 is also equipped with a powerful processor and a large touchscreen display. This makes it ideal for running demanding applications, such as inventory management, asset tracking, and work order management. The CK31 also has a built-in barcode scanner, which makes it easy to capture data from barcodes and RFID tags.

To put on the holster and shoulder strap
1 Slide the holster to the appropriate side of the belt.
2 Place the shoulder strap over your head so that the holster is on
the side of your body where you want to use it.
3 Adjust the shoulder strap so that the belt strap is at your waist.
4 With the holster on the outside of your thigh, buckle the belt
around your waist.
J-hook
Leg strap
Waist bel
t
buckle
5 Adjust the belt so it is snug and comfortable for you, and secure
the loose end of the belt in the J-hook.
6 Buckle the leg strap around your thigh.
7 Adjust the leg strap so it is snug and comfortable for you.
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2004 Intermec Technologies Corp.
All Rights Reserved
Holster and Shoulder Strap Instructions
*074131-001*
P/N 074131-001
Holster and Shoulder Strap Instructions
The holster and shoulder strap provide you with a convenient way to
carry the CK31 Handheld Computer or 751G Color Mobile
Computer when you are not using it.
Holster and Shoulder Strap: The holster and shoulder strap allow you to use it
on your left or right side whether or not your computer has a handle, serial
adapter, or CAC module installed. You can detach the shoulder strap if necessary.
You can configure the holster to be worn on either side of your
body. The holster can hold a CK31 or 751G with a handle, a CAC
reader, or a serial adapter installed.
Note: The illustrations in this guide show the CK31
for reference. The CK31 and the 751G use the same
shoulder strap, but they use different holsters.
If you do not have a handle attached to your CK31 or 751G, you
can insert it into the holster without having to move the position of
the holster.
To configure the holster, you need this tool:
#2 Phillips screwdriver
To configure the holster
1 Remove the Phillips screw from the bottom of the mounting bar.
Mounting
bar
Phillips
screw
Holste
r
2 Slide the holster down and off of the mounting bar.
Mounting
bar
Holster
3 Depending on whether you want to wear the holster on the right
or left side, insert the holster on the mounting bar according to
the next illustration.
To wear holster
on right side
To wear holster
on left side
4 Replace the screw in the bottom of the mounting bar.
  • Page 1 1
  • Page 2 2

Intermec Oracle-Ready CK31 Supplementary Manual

Type
Supplementary Manual
This manual is also suitable for

Intermec Oracle-Ready CK31 is a rugged handheld computer designed to withstand the demands of harsh environments. With its IP64 rating, it is resistant to dust and water, making it ideal for use in warehouses, manufacturing plants, and other industrial settings. The CK31 is also MIL-STD-810G certified, meaning it can withstand drops, vibrations, and extreme temperatures.

In addition to its rugged design, the CK31 is also equipped with a powerful processor and a large touchscreen display. This makes it ideal for running demanding applications, such as inventory management, asset tracking, and work order management. The CK31 also has a built-in barcode scanner, which makes it easy to capture data from barcodes and RFID tags.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI