AMQ FL-X Installation guide

Brand
AMQ
Model
FL-X
Type
Installation guide
FL-X INSTALLATION GUIDE | 1
amqsolutions.com
FL-X installation guide
FL-X INSTALLATION GUIDE | 2
amqsolutions.com
Optional Component
Drafting Ring Lift Extension
(separate box)
Seat Back
Seat Pan Seat Cover
Castors
Star Base
4 BoltsGas Lift
Installation Notes
• Please read the assembly instruction
sheet completely before assembly.
• Remove all parts from carton and
check that all parts are included prior to
assembly.
• Assemble the chair on the carton or table
to prevent scratching the chair.
• Please be mindful of the weight of chair
to avoid injury.
• Do not use power tools.
• Examine all packaging material and
remove staples before discarding carton.
• The parts of the product may be slightly
different from the drawings shown.
• For assistance, contact Customer Care at
(877) 801-0370
ships in separate box
COMPONENTS
Tools Required
5mm Allen Key
MAX
275 lbs
FL-X INSTALLATION GUIDE | 3
amqsolutions.com
Step 1 Frame Assembly
1. Select a smooth surface in order not to scratch the parts.
2. Attach the back to the seat pan with the 4 bolts (2 per side).
3. Insert the seat cushion into the seat pan.
4. Press down firmly on all 6 bolt pressure points to securely attach.
1 2
Step 2 Castors, Star Base and Gas Lift Assembly
1. Select a smooth surface in order not to scratch the parts.
2. Turn the star base upside down and press castors into holes at the end of each leg.
3. Turn the star base upright and insert the gas lift into the center hole of star base.
1
2
INSTALLATION
FL-X INSTALLATION GUIDE | 4
amqsolutions.com
Step 3 Final Assembly
1. Combine the upper part of the chair with the already
assembled bottom part.
2. If drafting ring is included, see below instructions before
proceeding with this step. Fix the cylinder to the hole
located below the upper part of the chair.
3. After installing the cylinder, sit on the chair and check
if the chair height adjustment lever is fully functional.
Optional Drafting Ring Lift Extension
1. Insert cylinder into ring. Tighten with knob.
2. Slide the cylinder into the 5-star base.
2
1
INSTALLATION
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

AMQ FL-X Installation guide

Brand
AMQ
Model
FL-X
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents