Coopers 9435 Operating instructions
- Category
- High-pressure cleaners
- Type
- Operating instructions
Pressure Washer 9435
Instructions
PARTS
1
. Main ON/OFF switch
2. High-pressure outlet
3. Water connection with filter
4. Coupling section
5. Lance with high-pressure nozzle
6. Supply hose(not supplied)
7. High-pressure hose
8. Spray gun
9. Mains plug
10. Trigger Lock
ASSEMBLY
High-Pressure Hose
• Connect the high-pressure hose (7) to the high-
pressure outlet (2) and to the spray gun (8).
• Attach the lance to the stand pipe and the stand
pipe in turn to the spray gun. Align the coupling of
the pipes with one of the connections. The
connection is locked by pressing and turning
simultaneously in a clockwise direction. The
connection is opened by first pressing the
components together and then turning the pipe in
an anticlockwise direction.
Detergent Container
• Connect the detergent container housing to the
spray gun by pressing and turning the connector
simultaneously. Fill the container and screw on to
attach.
Water Connection Requirements
The high-pressure cleaner is suitable for connection
to a standard domestic water supply. Please
observe the regulations of your water supply
company. The supply hose (not supplied) should be
standard
1
/
2
in hose.
Operating the high-pressure cleaner without water
will damage the pump. Please ensure before
switching on the cleaner that the water supply is
connected and turned on.
Please read carefully before use and retain for future reference.
5
4
1
8
2
3
9
2
6
3
7
8
10
DECLARATION OF CONFORMITY
We The Enterprise Department Ltd.
Of 11 Bridge Street, Bishop’s Stortford, Hertfordshire, UK. CM23
2JU
in accordance with the following Directive(s):
Machinery Directive 2006/32/EC
L
ow Voltage Directive 2006/95/EC
EN 60335-1:2002+A1+A2+A11+A12+A13
EN 60335-2-79: 2009
EN 62233: 2008
IEC 62321:200
hereby declare that:
Pressure Washer
Model number: 9435 (HPI1100N)
I hereby declare that the equipment named above has been
designed to comply with the relevant sections of the above
referenced specifications. The unit complies with all applicable
Essential Requirements of the Directives.
Mr. Stuart Fowler
Imports Director
December 2012
• Ensure the work area is clear of obstructions before use.
• Keep children, animals and bystanders away from work area during use.
• Keep away from children.
•
Regularly check the Pressure Washer and the power cable for damage. Do not
use the appliance if it is damaged.
• Do not try to repair the appliance. No user serviceable parts.
• Never operate the Pressure Washer where there is a risk of explosion.
• As additional protection the use of a residual current device (RCD) with a rated
breaking current of not more than 30mA is recommended.
• Do not clean any surfaces that may contain hazardous materials, such as
asbestos.
• The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
• This appliance should not be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Warning symbols
Never point the high-pressure jet at people, animals, the Pressure Washer itself or
electrical equipment.
CLEANING
• Wipe clean with a soft dry cloth
• Remove stubborn dirt with a soft damp cloth and dry thoroughly.
• Do not immerse in water to clean
STORAGE
• Store in a cool, dry place.
• Separate the accessories before storing.
• Allow the accessories and the high-pressure hose to run empty before storing.
• Protect from frost as water will remain in the pump and internal pipes. If this
water freezes it may cause damage to the Pressure Washer.
DISPOSAL
• Dispose of all paper, cartons and plastic in accordance with your local recycling
regulations. At the end of the product’s lifespan please dispose of it at an
authorised household waste recycling centre.
TECHNICAL INFORMATION
Motor Type Brush
Pressure 50Bar (725Psi)
Max Pressure 65Bar
Flow 5L/min
Power 1000W
Power Cable 10m
V
oltage 240V/ 50Hz
Weight 6 Kg
Standard Accessories (included) Pressure gun HPG08 3m Pressure hose
Detergent bottle
Additional accessories available Fixed brush
(not included) Floor/Patio cleaner
Rotary Brush
TROUBLESHOOTING
Problem Potential Solution
No Power 1. Check the mains connection.
2. Check the ON/OFF switch is in the ON
position.
The motor stops suddenly The thermal cut-out device that prevents
during use the Pressure Washer from overheating has
activated. Allow to cool for 20 mins
before re-using.
The Pressure Washer does not 1. Bleed the machine. Allow the pump
reach working pressure to run without the high pressure hose until
the water coming out of the high pressure
outlet no longer contains any bubbles then
re-connect the high pressure hose.
2. Clean the filter in the water connection.
3. Check the water supply flow.
4. Check the supply pipes for leakages or
blockages.
There are major fluctuations 1. Clean the high pressure nozzle
in pressure 2. Remove any dirt from the apertures with
a needle.
Leaking pump It is normal for a small amount of seepage
from the pump. However, larger leaks are
abnormal and should be fixed before
continuing use.
BEFORE USE
•
Check the item including hose and power cable for damaged before first use.
Do not use if damaged in any way.
• The device must be connected to the electricity and water supply.
• Disconnect the high-pressure hose (7).
• Switch on the device and allow it to run until the water coming out of the
h
igh-pressure connection no longer contains any bubbles.
• Switch off the machine at the main switch (1) and re-connect the high-
pressure hose (7) back on.
OPERATION
Connection
• Use a hose to connect the water connection (3) to the water supply.
• Open the water supply and check for any leaks. A low level of water loss by the
pump is normal.
• Insert the mains plug (9) into the mains socket and switch on.
• Turn the main ON/OFF switch (1) on.
Use
• The jet of water emerging from the high-pressure nozzle may cause the manual
spray gun to recoil.
• Ensure you have a firm footing at all times. Hold the manual spray gun and the
lance as tightly as possible.
• The Pressure Washer can be used to clean machines, vehicles, buildings, tools,
facades, terraces, garden tools etc. using the high-pressure water jet.
Detergents can be used by attaching the detergent container. Spray the
detergent sparingly on to the dry surface, and agitate or allow it to act for a short
time without letting the detergent dry.
Rinse off the loosened dirt with the high-pressure jet.
• The cleaning of motors, engines and other oily surfaces should only be done in
conjunction with an appropriate detergent.
• Please use detergents sparingly noting the quantities recommended by the
producer.
• Motor vehicle tyres and tyre valves may be damaged by the high-pressure jet.
Only the fan jet should be used when cleaning vehicles and a distance of at
least 50cm should be maintained during the cleaning process.
• For painted or insulated surfaces, begin at a considerable distance away and
move slowly closer (depending on the degree of soiling) to the object to be
cleaned. Stop and check the surface at short intervals in order to prevent
damage.
• Do not underestimate the power of the pressure produced by the high-pressure
cleaner. Always use the fan jet to clean sensitive surfaces.
• If necessary, clean the supply water with a water filter. Any impurities in the
water could damage the pump.
• Wear appropriate protective clothing as protection against spray.
• The high pressure washer is equipped with an internal pressure switch. It
functions only when you press on the trigger. When you release the trigger, the
washer stops automatically.
Working with the Spray Gun
To prevent unintentional use, ensure the trigger lock clip on the back of the
trigger is deployed.
Switching ON: Release the lock (10), and pull the trigger of the gun.
S
witching OFF: Release the trigger. During work breaks and storage secure the
hand spray gun (8) with the lock (10).
Adjustment of the Spray Jet
Vary the spray from a narrow jet to a fan jet by turning the lance nozzle (5).
Replacing accessories
• Turn the Pressure Washer off and unplug from the mains.
• Allow the pressure to escape by operating the trigger on the spray gun (8).
• Attach the desired accessory and then continue operating.
• Note: When the detergent container accessory is being used it is not possible
to obtain a high-pressure effect.
Finishing Operation
• Turn the Pressure Washer off and unplug from the mains.
• Turn off the water supply.
• Allow any residual pressure to escape by operating the trigger on the spray
gun (8).
• Secure the spray gun (8) with the trigger lock (10).
• Disconnect the Pressure Washer from the water supply by unscrewing the hose
on the water connection (3) of the device.
WARNING
• Only use extension leads that are protected against water spray, with high
mechanical strength and are rated for outdoor use.
• Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine.
• For outdoor, domestic use only.
• Only use for the intended use as described in this manual.
• Keep away from heat, direct sunlight, moisture and rain, frost and sharp edges.
• Do not immerse into water.
• Do not use the appliance with wet hands. If the appliance gets wet, unplug it
immediately ensuring you do not touch the mains plug with wet hands.
• Always unplug the Pressure Washer by gripping the plug. Do not pull on the
cable.
• Always remove the attached accessories when not in use.
• Do not leave the Pressure Washer unattended. If you should leave the work
area, always switch the machine off and remove the plug from the mains.
• During work breaks the manual spray gun should be secured by use of the
trigger lock.
-
1
-
2
Coopers 9435 Operating instructions
- Category
- High-pressure cleaners
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Kärcher K 2.399 User manual
-
-
STIHL RE 130 PLUS Owner's manual
-
STIHL RE 150 PLUS, 170 PLUS Owner's manual
-
Ferm GRM1020 Owner's manual
-
-
STIHL RE 90 Owner's manual
-
-
-