Moen 21538 Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the Moen 21538 Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Specifications
SINK COMBO DESCRIPTION
Manufactured from 18 gauge, stainless steel
Overall sink dimension 33" x 22"
Bowl Left: 14" x 18" x 9"
Bowl Right: 14" x 16" x 9"
Pulldown faucet with soap dispenser in Spot Resist™ Stainless nish
3-1/2" diameter recessed drain opening in each bowl
Included sink drain assemblies (Qty 2)
Soundshield™ undercoating maximizes sound deadening and inhibits condensation
QuickMount™ mounting hardware for top-mount installation
Under-mount installation clips not included
CUT OUT DIMENSIONS
Cut out dimensions are 32-3/8" x 21-3/8", with a 3/8" corner radius (top mount)
Cut out prole is shown on included template (under mount)
A tolerance of ±1/16" is acceptable
STANDARDS
Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4 and all applicable
specications referenced therein
FAUCET STANDARDS
Third party certied to ASME A112.18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9 & 372
Meets CalGreen and Georgia SB8370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
The backow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevents backow
• ADA for lever handle
WARRANTY
Lifetime limited warranty against material or manufacturing defects to the original
consumer purchaser
5 year warranty if used in commercial installations
Kelsa™
Oset Double Bowl Sink w/Faucet
Models: 21538
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
11/15
INSTALLATION DETAIL
MOUNTING STUD
COUNTERTOP
SINK “VCHANNEL
COUNTERTOP CUT-OUT
SINK OVERALL DIMENSION
SEALANT
MOUNTING NUT
MOUNTING CLIP
9"
(226mm)
2"
(51mm)
16-1/16"
(408mm)
4-7/16"
(112mm)
4-1/4"
(108mm)
3"
(76mm)
15-5/8"
(396mm)
O 1.5"
O.D. DRAIN
(2 PLACES)
8-3/4"
(222mm)
7-7/8"
(199mm)
9-3/4"
(248mm)
1"
(25mm)
11-1/8"
(282mm)
2"
(51mm)
22"
(559mm)
3-5/16"
(83mm)
33"
(838mm)
R
/