Husky 80-511-111 Operating instructions

WARNING

This warranty excludes incidental/inconsequential damages

and failures due to misuse, abuse, normal wear and tear and

dulling of the blade(s).

Specifications

• Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit

• Compact size allows easy use in tight places

• Heavy-duty tubing cutter

• Spoked design knob for added leverage and turning ease

• 1/2 in. maximum NPS capacity, 1/4 in. minimum NPS capacity

• 5/8 in. maximum O.D. pipe size, 1/8 in. minimum O.D. pipe size capacity

Product Overview

Husky's 5/8 in. Junior Tube Cutter can trim various sizes of tubing quickly and

with little effort. The knob has a spoked design for added leverage and turning

ease. It provides clean, square cuts on copper, brass, aluminum and thin-wall

conduit, especially in tight spaces. This heavy-duty cutter is the perfect addition

to your toolbox.

Read all instructions caredully before using:

1. Turn knob to open cutter jaw beyond diameter of tubing

2. Line up cutting wheel with cutting line on tubing and until snug

3. Rotate cutter around tubing, tightening knob every few turns until wheel cuts through tubing

4. Deburr and clean out edge

Operating Instructions

If you have any question concerning this product:

– Contact your local Homedepot Store.

– Contact 1-888-HD-HUSKY.

Instruction Sheet

5/8 in. Junior

Tube Cutter