Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Spring Washer
4 pcs.(+1 extra)
Flat Washer
4 pcs.(+1 extra)
Caster
5 pcs.
A.
Seat
1 pc.
M6x16
Head Cap Bolt
4 pcs.(+1 extra)
Hex Wrench
1 pc.
Key Wrench
1 pc.
Small
Hex Wrench
1 pc.
88 5079 53
Swivel Chair
B.
Mechanism
.1 pc
C.
Cylinder
.1 pc
D.
Base
.1 pc
STEP 1
STEP 2
Assembly Instructions 2/2
Attach Mechanism (B) to Seat (A) with
Head Cap Bolts, Spring Washers and
Flat Washers. (See Figure 1)
Slide Cylinder (C) into position.
Head Cap Bolt
Spring Washer
Flat Washer
Caster
Key Wrench
IMPORTANT
* Do not tighten up all the Head Cap Bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
B
Figure 1
.
Attach Casters to Base (D),
using Key Wrench. (See Figure 2)
Attach seat unit to base unit.
C
A
D
Figure 2
/
