Fluidmaster 5401GB Installation guide

Fluidmaster
Brand
Fluidmaster
Model
5401GB
Type
Installation guide

This manual is also suitable for

Fluidmaster 5401GB is a universal adjustable flapper that fits 3" toilets, including Glacier Bay, American Standard, and others. It helps conserve water by adjusting the amount of water flushed with each use. The flapper is easy to install and comes with detailed instructions. Here are some of its key capabilities:

  • Universal fit: The flapper fits most 3" toilets, making it a versatile choice for various bathroom setups.

  • Adjustable water flush: The flapper allows you to customize the amount of water used per flush, helping conserve water and potentially lower water bills.

  • Easy installation: The flapper can be installed quickly and easily following the provided instructions, which include step-by-step guidance with diagrams for a hassle-free replacement process.

Fluidmaster 5401GB is a universal adjustable flapper that fits 3" toilets, including Glacier Bay, American Standard, and others. It helps conserve water by adjusting the amount of water flushed with each use. The flapper is easy to install and comes with detailed instructions. Here are some of its key capabilities:

  • Universal fit: The flapper fits most 3" toilets, making it a versatile choice for various bathroom setups.

  • Adjustable water flush: The flapper allows you to customize the amount of water used per flush, helping conserve water and potentially lower water bills.

  • Easy installation: The flapper can be installed quickly and easily following the provided instructions, which include step-by-step guidance with diagrams for a hassle-free replacement process.

FLUIDMASTER
®
5401GB
UNIVERSAL GLACIER BAY
®
3" ADJUSTABLE FLAPPER
Also Fits American Standard
®
& Other Toilets
FLUIDMASTER
®
5401GB
UNIVERSAL GLACIER BAY
®
TAPÓN AJUSTABLE DE 7,62 CM
TAMBIÉN SE ADAPTA A LOS AMERICAN STANDARD
®
Y OTROS INODOROS
GLACIER BAY 2-PIECE
HIGH EFFICIENCY TOILET
#3
230.379.07
NIZA PRO RD ADA
#5
195.077.68
FLOAT SETTING
CHAIN LENGTH
mminches
CONFIGURACIÓN DEL FLOTADOR LONGITUD DE LA CADENA
DESCRIPTION
DESCRIPCIÓN
SET TO OPTIMIZE.
AJÚSTELO PARA OPTIMIZAR .
1. Remove old flapper from mounting ears and
unhook chain.
2. Snap arms onto flush valve mounting ears.
Flapper should move freely when raised and
lowered.
3. Hook chain onto tank lever arm. There should be
1/2” slack when the flapper is closed. If needed,
remove clip and hook it a few links closer to the
flapper to shorten. Use old flapper chain length as
a guide.
4. For Glacier Bay and Niza toilets, use chart on
other side of card to set at proper float setting
and chain length.
5. For all other toilets, adjust the dial to setting
number 10 and flush your toilet. Continue to
adjust dial down one setting until your toilet is
unable to flush properly. When the flapper dial is
on a setting that does not allow for a proper
flush, adjust the dial up one setting.
1. Quite el tapón viejo de las orejas de montaje y desenganche la cadena.
2. Sujete a presión los brazos en las orejas de montaje de la válvula de descarga. El
tapón tiene que poder moverse libremente cuando lo suba y lo baje.
3. Enganche la cadena en la palanca del tanque. Debería quedar 1,27 cm de distención
cuando se cierre el tapón. Si es necesario, quite el gancho de la cadena y enganche
algunos eslabones más cerca al tapón para acortarla. Utilice la longitud de la cadena del
tapón viejo para guiarse.
4. Para los inodoros Glacier Bay y Niza, utilice la tabla en el otro lado de la tarjeta para
ajustar correctamente el flotador y la longitud de la cadena.
5. Para todos los demás inodoros, ajuste el dial en el número de ajuste 10 y descarge el
inodoro. Siga ajustando el dial un ajuste menos hasta que su inodoro no pueda
descargar correctamente. Cuando el dial del tapón se encuentre en un ajuste que no
permita descargar el inodoro correctamente, aumente el dial un ajuste más.
INSTALL WITH CONFIDENCE • INSTÁLE CON CONFIANZA
MORE DETAILED INSTRUCTIONS
INSTRUCCIONES MÁS DETALLADAS
REMOVE OLD FLAPPER.
MOUNT NEW FLAPPER.
QUITE EL TAPÓN VIEJO.
COLOQUE EL TAPÓN NUEVO.
ATTACH CHAIN -
LEAVE 1/2” SLACK.
CONECTE LA CADENA, DÉJE UNA
DISTENCIÓN DE1,27 CM
2
LESS
WATER
FLUSHED
MENOS
DESCARGA
DE AGUA
MORE
WATER
FLUSHED
MÁS
DESCARGA
DE AGUA
3
1
  • Page 1 1

Fluidmaster 5401GB Installation guide

Fluidmaster
Brand
Fluidmaster
Model
5401GB
Type
Installation guide
This manual is also suitable for

Fluidmaster 5401GB is a universal adjustable flapper that fits 3" toilets, including Glacier Bay, American Standard, and others. It helps conserve water by adjusting the amount of water flushed with each use. The flapper is easy to install and comes with detailed instructions. Here are some of its key capabilities:

  • Universal fit: The flapper fits most 3" toilets, making it a versatile choice for various bathroom setups.

  • Adjustable water flush: The flapper allows you to customize the amount of water used per flush, helping conserve water and potentially lower water bills.

  • Easy installation: The flapper can be installed quickly and easily following the provided instructions, which include step-by-step guidance with diagrams for a hassle-free replacement process.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents