TECHNICAL DATA KRK-08
KRUD KUTTER
®
BRUSH-WASH
BRUSH CLEANER & RENEWER
Form: GDH-527
Rev.: 092616
.DESCRIPTION AND USES .
Krud Kutter
®
Brush Wash is formulated to clean and
recondition synthetic bristle brushes and roller covers. It is
a biodegradable, water-based formula that is a safe, fast
and effective on oil, latex and enamel paints, varnish,
lacquer, shellac and polyurethane.
PRODUCTS .
SKU Description
BW326 32 oz. Bottle
BW016 1-Gallon Bottle
BW05 5-Gallons
BW55 55-Gallons
PRODUCT APPLICATION .
DIRECTIONS
Suspend brush in a container (such as a coffee can), and
cover bristles up to the metal ferrule. Soak the brush
several hours or overnight until the paint has softened.
Agitate periodically to loosen paint. After paint has
softened, scrape off paint residue (from heel of brush)
using a metal comb or similar tool. Return brush to cleaner
and agitate to loosen remaining residue. Lay brush flat on
a piece of newspaper and squeeze out excess cleaner.
Rinse brush thoroughly with warm running water and
shake off excess water. Wrap clean brush in heavy paper
and hang bristles down for storage.
TO CLEAN BRUSHES THAT HAVE FRESH PAINT ON
THEM, AGITATE THE BRUSH IN BRUSH-WASH
IMMEDIATELY AFTER USE.
CAUTION: EYE AND SKIN IRRITANT. In case of contact
with eyes or skin, flush with water for 15 minutes. If
irritation persists, seek medical attention. If swallowed,
take large amounts of water. Do not induce vomiting.
Get medical attention.
NO PETROLEUM SOLVENTS, BLEACH OR AMMONIA.
KEEP OUT OF REACH OF CHILDREN.