Jackel SF30BA User manual

The SF30BA is designed to hold a sump, efflu-

ent or sewage pump. The single piece basin is

injection molded structural foam polyethylene

and provides superior structural toughness and

reliability. This basin features a factory punched

inlet that accepts drain tile and 4 in. inlet hubs,

flanges or grommets. The rim of the basin in-

cludes pre-drilled holes with metal inserts to ac-

cept the mounting and securing of a cover. The

cover for the basin is sold separately. The

SF30BA has a true 30 gallon capacity.

 30 U.S. gallon capacity

 Heavy duty structural foam injection

molded construction

 Ultra strong, reinforced bottom will not

flex

 Cover mounting metal inserts included

on basin

 Gas and radon tight

 Odor free

 Dozens of cover options available

 Material: Injection molded structural foam

 Inserts: Metal

 Weight: 16 lbs.

 Total Capacity: 30 gallons

18” X 30” Sewage Basin

Part Number: SF30BA

Features and Benefits

Dimensions

Specifications

Jackel, Inc · 15314 Harrison Road · Mishawaka, IN 46544 · (574) 256-5635 · (574) 256-6966 fax · www.jackelinc.com

SF30BAPS, 12/13

Jackel