Latex-ite 12967 Installation guide

APPLICATION INSTRUCTIONS: Apply Latex•ite® Ice & Snow Melt evenly by

spreading 1/2 to 1 cup per square yard to your parking lot, driveway or walkway

before or after a snow/ice event. Once treated, the area will melt up to 3” of

precipitation before a second application is required. Keep treated slush away from

plants and vegetation as best as possible.

FIRST AID: Always wear gloves when applying. Prolonged exposure to skin may

cause irritation. If swallowed seek medical attention. For eye exposure, flush with

water for 15 minutes to remove irritants. Contact a physician if necessary.

WARNING: Latex•ite® Ice & Snow Melt should not be used on old or structurally

poor concrete. It should NOT be used on concrete that is less than 1 year old. Keep

treated slush away from plants and vegetation as best as possible. Keep product in

a dry place when not in use.