Gigabyte GA-H97-GAMING 3 (REV. 1.0) User manual

GA-H97-Gaming 3

User's Manual

Rev. 1001

12ME-H97GM3-1001R

Motherboard

GA-H97-Gaming 3

May 9, 2014

Motherboard

GA-H97-Gaming 3

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any

form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of

documentations:

 For detailed product information, carefully read the User's Manual.

 For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

Box Contents ...................................................................................................................6

Optional Items .................................................................................................................6

GA-H97-Gaming 3 Motherboard Layout .........................................................................7

GA-H97-Gaming 3 Motherboard Block Diagram ............................................................8

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions ................................................................................... 9

1-2 ProductSpecications ................................................................................... 10

1-3 Installing the CPU and CPU Cooler............................................................... 13

1-3-1 Installing the CPU ..................................................................................................13

1-3-2 Installing the CPU Cooler ......................................................................................15

1-4 Installing the Memory .................................................................................... 16

1-4-1 DualChannelMemoryConguration ....................................................................16

1-4-2 Installing a Memory ................................................................................................17

1-5 Installing an Expansion Card ......................................................................... 18

1-6 Back Panel Connectors ................................................................................. 19

1-7 Internal Connectors ....................................................................................... 21

Chapter 2 BIOS Setup .................................................................................................. 31

2-1 Startup Screen ............................................................................................... 32

2-2 The Main Menu .............................................................................................. 33

2-3 M.I.T. .............................................................................................................. 36

2-4 System Information ........................................................................................ 47

2-5 BIOS Features ............................................................................................... 48

2-6 Peripherals ..................................................................................................... 52

2-7 Power Management ....................................................................................... 56

2-8 Save & Exit .................................................................................................... 58

- 5 -

Chapter3 ConguringSATAHardDrive(s) ..................................................................59

3-1 ConguringSATAControllers ........................................................................ 59

3-2 Installing the SATA RAID/AHCI Driver and Operating System ..................... 71

Chapter 4 Appendix ......................................................................................................75

Drivers Installation .................................................................................................... 75

Regulatory Statements ............................................................................................. 76

Contact Us ................................................................................................................ 79

- 6 -

Optional Items



2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)



eSATAbracket(PartNo.12CF1-3SATPW-4*R)



3.5"FrontPanelwith2USB3.0/2.0ports(PartNo.12CR1-FPX582-2*R)



COMportcable(PartNo.12CF1-1CM001-3*R)



HDMI-to-DVIadapter(PartNo.12CT2-HDMI01-1*R)

The box contents above are for reference only and the actual items shall depend on the product package you

obtain. The box contents are subject to change without notice.

Box Contents

5

GA-H97-Gaming 3 motherboard

5

Motherboard driver disk

5

User's Manual

5

Four SATA cables

5

I/O Shield

- 7 -

GA-H97-Gaming 3 Motherboard Layout

KB_MS_USB

CPU_FAN

ATX_12V_2X4

ATX

F_AUDIO

B_BIOS

PCIEX4

DDR3_2

DDR3_1

DDR3_4

DDR3_3

BAT

F_PANELCOMA

Intel

®

H97

PCIEX1_2

CLR_CMOS

CODEC

CPU_OPT

M_BIOS

PCI1

PCIEX16

PCIEX1_1

SPDIF_O F_USB2

LGA1150

GA-H97-Gaming 3

DVI

VGA

PCI3

F_USB30

PCI2

SYS_FAN3

SATA3

iTE

®

Super I/O

SYS_FAN2F_USB3 F_USB1TPM

1 0

3 2

SYS_FAN1

M.2

PCIe to

PCI Bridge

SATA_EXPRESS

SATA3

5 4

AUDIO

R_USB30

USB30_LAN

DP_HDMI_SPDIF

Qualcomm

®

Atheros Killer

E2201LAN

- 8 -

GA-H97-Gaming 3 Motherboard Block Diagram

Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."

Dual Channel Memory

PS/2 KB/Mouse

DMI 2.0

FDI

CPUCLK+/-(100MHz)

Dual BIOS

DDR31600/1333MHz

COM

LPC

Bus

Intel

®

H97

iTE

®

Super

I/O

PCIe CLK

(100MHz)

PCIe CLK

(100MHz)

PCI Express Bus

1 PCI Express x16

x1

LAN

RJ45

Intel

®

GbE

LAN

3 PCI

PCI Bus

PCI CLK

(33MHz)

PCIe to PCI

Bridge

x1

PCI Express Bus

x16

D-Sub

4 SATA 6Gb/s

8 USB 2.0/1.1

6 USB 3.0/2.0

Center/Subwoofer Speaker Out

Line Out

MIC

Line In

S/PDIF Out

Side Speaker Out

Rear Speaker Out

CODEC

x1x1

2 PCI Express x1

1 PCI Express x4

Switch

or

x4

SATA Express

M.2

or

Switch

2 SATA 6Gb/s

DVI-D

HDMI

DisplayPort

LGA1150 CPU

- 9 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's

manual and follow these procedures:

• Prior to installation, make sure the chassis is suitable for the motherboard.

• Priortoinstallation,donotremoveorbreak motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• Whenconnectinghardwarecomponentstotheinternalconnectorsonthemotherboard,make

sure they are connected tightly and securely.

• Whenhandlingthemotherboard,avoidtouchinganymetalleadsorconnectors.

• Itisbesttowearanelectrostaticdischarge(ESD)wriststrap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

• Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power supply

has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

- 10 -

Hardware Installation

1-2 ProductSpecications

CPU  Support for Intel

®

Core

™

i7 processors/Intel

®

Core

™

i5 processors/

Intel

®

Core

™

i3 processors/Intel

®

Pentium

®

processors/Intel

®

Celeron

®

processors in

theLGA1150package(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

 L3 cache varies with CPU

Chipset  Intel

®

H97 Express Chipset

Memory  4 x DDR3 DIMM sockets supporting up to 32 GB of system memory

* DuetoaWindows32-bitoperatingsystemlimitation,whenmorethan4GBofphysical

memoryisinstalled,theactualmemorysizedisplayedwillbelessthanthesizeof

the physical memory installed.

 Dual channel memory architecture

 SupportforDDR31600/1333MHzmemorymodules

 Support for non-ECC memory modules

 SupportforExtremeMemoryProle(XMP)memorymodules

 (GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemory

modules.)

Onboard

Graphics

 Integrated Graphics Processor:

- 1xD-Subport,supportingamaximumresolutionof1920x1200@60Hz

- 1xDVI-Dport,supportingamaximumresolutionof1920x1200@60Hz

* TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

- 1xHDMIport,supportingamaximumresolutionof4096x2160@24Hzor

2560x1600@60Hz

* SupportforHDMI1.4aversion.

- 1xDisplayPort,supportingamaximumresolutionof4096x2160@24Hzor

3840x2160@60Hz

* SupportforDisplayPort1.2version.

- Support for up to 3 displays at the same time

- Maximum shared memory of 1 GB

Audio  Realtek

®

ALC1150 codec

 SupportforSoundBlasterX-FiMB3

 HighDenitionAudio

 2/4/5.1/7.1-channel

 Support for S/PDIF Out

LAN  Qualcomm

®

AtherosKillerE2201LANchip(10/100/1000Mbit)

Expansion Slots  1xPCIExpressx16slot,runningatx16(PCIEX16)

(ThePCIEX16slotconformstoPCIExpress3.0standard.)

* Foroptimumperformance,ifonlyonePCIExpressgraphicscardistobeinstalled,

besuretoinstallitinthePCIEX16slot.

 1xPCIExpressx16slot,runningatx4(PCIEX4)

* ThePCIEX4slotsharesbandwidthwiththePCIExpressx1slots.ThePCIExpress

x1 slots will become unavailable when a PCIe x4 expansion card is installed.

* Wheninstalling ax8 orabove cardinthe PCIEX4slot, makesure toset PCIE

SlotConguration(PCH)inBIOSSetuptox4.(RefertoChapter2,"BIOSSetup,"

"Peripherals,"formoreinformation.)

 2 x PCI Express x1 slots

(ThePCIEX4andthePCIExpressx1slotsconformtoPCIExpress2.0standard.)

 3 x PCI slots

- 11 -

Hardware Installation

Multi-Graphics

Technology

 Supportfor2-WayAMDCrossFire

™

technology

Storage Interface  Chipset:

- 1 x M.2 PCIe connector

- 1 x SATA Express connector

- 6 x SATA 6Gb/s connectors

(M.2,SATAExpress,andSATA34/5connectorscanonlybeusedoneatatime.

TheSATA34/5connectorswillbecomeunavailablewhenanM.2SSDisinstalled.)

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

USB  Chipset:

- 6xUSB3.0/2.0ports(4portsonthebackpanel,2portsavailablethrough

theinternalUSBheader)

- 8xUSB2.0/1.1ports(2portsonthebackpanel,6portsavailablethrough

theinternalUSBheaders)

Internal

Connectors

 1x24-pinATXmainpowerconnector

 1x8-pinATX12Vpowerconnector

 1 x M.2 PCIe connector

 1 x SATA Express connector

 6 x SATA 6Gb/s connectors

 1 x USB 3.0/2.0 header

 3 x USB 2.0/1.1 headers

 1 x CPU fan header

 1xwatercoolingfanheader(CPU_OPT)

 3 x system fan headers

 1 x front panel header

 1 x front panel audio header

 1 x serial port header

 1xTrustedPlatformModule(TPM)header

 1 x S/PDIF Out header

 1 x Clear CMOS jumper

Back Panel

Connectors

 1 x PS/2 keyboard/mouse port

 1 x D-Sub port

 1 x DVI-D port

 1 x HDMI port

 1 x DisplayPort

 4 x USB 3.0/2.0 ports

 2 x USB 2.0/1.1 ports

 1 x RJ-45 port

 6xaudiojacks(Center/SubwooferSpeakerOut,RearSpeakerOut,SideSpeaker

Out,LineIn,LineOut,MicIn)

I/O Controller  iTE

®

I/O Controller Chip

- 12 -

Hardware Installation

Hardware

Monitor

 System voltage detection

 CPU/System temperature detection

 CPU/CPU OPT/System fan speed detection

 CPU/System overheating warning

 CPU/CPU OPT/System fan fail warning

 CPU/CPU OPT/System fan speed control

* Whetherthefanspeedcontrolfunctionissupportedwilldependonthecooleryou

install.

BIOS  2x64Mbitash

 Use of licensed AMI UEFI BIOS

 Support for DualBIOS

™

 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features  Support for APP Center

* AvailableapplicationsinAPPCentermaydifferbymotherboardmodel.Supported

functions of each application may also differ depending on motherboard

specications.

- @BIOS

- EasyTune

- EZ Setup

- Fast Boot

- Game Controller

- ON/OFFCharge

- Smart TimeLock

- Smart Recovery2

- System Information Viewer

- USB Blocker

 Support for Q-Flash

 Support for Smart Switch

 SupportforXpressInstall

Bundled

Software

 Norton

®

InternetSecurity(OEMversion)

 Intel

®

Rapid Start Technology

 Intel

®

Smart Connect Technology

 Intel

®

Smart Response Technology

Operating

System

 SupportforWindows8.1/8/7

Form Factor  ATXFormFactor;30.5cmx21.4cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

* PleasevisittheSupport&Downloads\UtilitypageonGIGABYTE'swebsitetocheckthesupportedoperatingsystem(s)for

the software listed in the "Unique Features" and "Bundled Software" columns.

- 13 -

Hardware Installation

1-3 Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

• Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

• LocatethepinoneoftheCPU.TheCPUcannotbeinsertediforientedincorrectly.(Oryoumaylocate

thenotchesonbothsidesoftheCPUandalignmentkeysontheCPUsocket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

• SettheCPUhostfrequencyinaccordancewiththe CPUspecications. Itis notrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Notch

Alignment

Key

Alignment

Key

Notch

LGA1150 CPU

LGA1150 CPU Socket

Pin One Corner of the CPU Socket

Triangle Pin One Marking on the CPU

- 14 -

Hardware Installation

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

Step 1:

Gently press the CPU socket lever handle down

andawayfromthesocketwithyournger.Then

completely lift the CPU socket lever and the metal

load plate/plastic cover will be lifted as well.

Step 2:

HoldtheCPUwithyourthumbandindexngers.

AligntheCPUpinonemarking(triangle)withthe

pinonecorneroftheCPUsocket(oryoumayalign

theCPUnotcheswiththesocketalignmentkeys)

and gently insert the CPU into position.

Step 4:

Finally, secure the lever under its retention tab to

complete the installation of the CPU.

NOTE:

Hold the CPU socket lever by the handle, not the lever base portion.

• Before installing the CPU, make sure to turn off the computer and unplug the power cord from

the power outlet to prevent damage to the CPU.

• To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 3:

Once the CPU is properly inserted, carefully

replacetheloadplate.Whenreplacingtheload

plate, make sure the front end of the load plate

is under the shoulder screw. Then press the CPU

socket lever. The protective plastic cover may

pop off from the load plate during the process of

engagingthelever.Removethecover.(Savethe

cover properly and always replace it when the

CPUisnotinstalled.)

- 15 -

Hardware Installation

1-3-2 Installing the CPU Cooler

FollowthestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Thefollowingprocedureuses

Intel

®

boxedcoolerastheexamplecooler.)

Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU

cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

Step 5:

After the installation, check the back of the

motherboard. If the push pin is inserted as the

picture above shows, the installation is complete.

Step 6:

Finally, attach the power connector of the CPU

coolertotheCPUfanheader(CPU_FAN)onthe

motherboard.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Before installing the cooler, note the direction of the

arrow sign onthemalepushpin.(Turningthe

push pin along the direction of arrow is to remove

thecooler,onthecontrary,istoinstall.)

Step 3:

Place the cooler atop the CPU, aligning the

four push pins through the pin holes on the

motherboard. Push down on the push pins

diagonally.

Step 4:

You should hear a "click" when pushing down each

push pin. Check that the Male and Female push

pins are joined closely.

(RefertoyourCPUcoolerinstallationmanualfor

instructionsoninstallingthecooler.)

Male

Push Pin

Female

Push Pin

The Top

of Female

Push Pin

Direction of

the Arrow Sign

on the Male

Push Pin

- 16 -

Hardware Installation

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemorymodules.)

• Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.



DualChannelMemoryCongurationsTable:

(SS=Single-Sided,DS=Double-Sided,"--"=NoMemory)

1-4-1 DualChannelMemoryConguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the

memoryisinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.Enabling

Dual Channel memory mode will double the original memory bandwidth.

The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as

following:

Channel A: DDR3_2, DDR3_4

Channel B: DDR3_1, DDR3_3

DDR3_4

DDR3_2

DDR3_3

DDR3_1

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. WhenenablingDualChannelmodewithtwoorfourmemorymodules,itisrecommendedthatmemory

of the same capacity, brand, speed, and chips be used and installed in the same colored DDR3

sockets. For optimum performance, when enabling Dual Channel mode with two memory modules,

we recommend that you install them in the DDR3_1 and DDR3_2 sockets.

DDR3_4 DDR3_2 DDR3_3 DDR3_1

Two Modules

- - DS/SS - - DS/SS

DS/SS - - DS/SS - -

Four Modules DS/SS DS/SS DS/SS DS/SS

- 17 -

Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are

not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard.

Notch

DDR3 DIMM

ADDR3memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall

your memory modules in the memory sockets.

Step 1:

Notetheorientationofthememorymodule.Spreadtheretainingclips

at both ends of the memory socket. Place the memory module on the

socket.Asindicatedinthepictureontheleft,placeyourngerson

the top edge of the memory, push down on the memory and insert it

vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

- 18 -

Hardware Installation

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

• Make sure the motherboard supports the expansion card. Carefully read the manual that came with

your expansion card.

• Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

PCI Express x1 Slot

PCI Express x16 Slot

PCI Slot

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. Afterinstallingallexpansioncards,replacethechassiscover(s).

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your

expansioncard(s).

7. Install the driver provided with the expansion card in your operating system.

Example: Installing and Removing a PCI Express Graphics Card:

• Installing a Graphics Card:

Gently push down on the top edge of the card until it is

fully inserted into the PCI Express slot. Make sure the

card is securely seated in the slot and does not rock.

• Removing the Card:

Gently push back on the lever on the slot and then lift the card straight out from the slot.

- 19 -

Hardware Installation

1-6 Back Panel Connectors

USB 2.0/1.1 Port

TheUSBportsupportsthe USB2.0/1.1 specication.Usethisportfor USBdevices suchas aUSB

keyboard/mouse,USBprinter,USBashdriveandetc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

D-Sub Port

TheD-Subportsupportsa15-pinD-Subconnectorandsupportsamaximumresolutionof1920x1200@60Hz

(theactualresolutionssupporteddependonthemonitorbeingused).Connectamonitorthatsupports

D-Sub connection to this port.

DVI-D Port

(Note)

TheDVI-DportconformstotheDVI-Dspecicationandsupportsamaximumresolutionof1920x1200@60Hz

(theactualresolutionssupporteddependonthemonitorbeingused).Connectamonitorthatsupports

DVI-D connection to this port.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

MasterAudio formats.It alsosupports upto 192KHz/24bit8-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolutionis4096x2160@24Hzor2560x1600@60Hz,buttheactualresolutionssupportedare

dependent on the monitor being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(Theitemnamemaydifferdependingonyouroperatingsystem.Thescreenshotbelowisfrom

Windows8.1.)

InWindows8.1,selectApps>ControlPanel>Hardwareand

Sound>Sound>Playback,setIntel(R)DisplayAudiotothe

default playback device.

(Note) TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

- 20 -

Hardware Installation

Center/Subwoofer Speaker Out Jack (Orange)

Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.

Rear Speaker Out Jack (Black)

Thisjackcanbeusedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.

Side Speaker Out Jack (Gray)

Usethisaudiojacktoconnectsidespeakersina7.1-channelaudioconguration.

Line In Jack (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The line out jack. This jack supports audio amplifying function. For better sound quality, it is recom-mended

thatyouconnectyourheadphone/speakertothisjack(actualeffectsmayvarybythedevicebeingused).

Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers

ina4/5.1/7.1-channelaudioconguration.

Mic In Jack (Pink)

The Mic in jack. Microphones must be connected to this jack.

USB 3.0/2.0 Port

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.

RJ-45 LAN Port

TheGigabit EthernetLAN portprovidesInternetconnectionatupto1Gbps datarate.Thefollowing

describesthestatesoftheLANportLEDs.

Theaudiojackscanbereconguredtoperformdifferentfunctionsviatheaudiosoftware(supported

functionsforeachjackmayvarybasedonhardwarespecication). Only microphones still MUST be

connected to the default Mic in jack.

Triple-DisplayCongurationsfortheOnboardGraphics:

 Triple-displaycongurationsaresupportedafteryouinstallmotherboarddriversinOS.Onlydual-display

congurationsaresupportedduringtheBIOSSetuporPOSTprocess.

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• Whenremovingthecable,pullitstraightoutfromtheconnector.Donotrockitsidetosidetoprevent

an electrical short inside the cable connector.

DisplayPort

DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission.

DisplayPort can support both DPCP and HDCP content protection mechanisms. You can use this port to

connectyourDisplayPort-supportedmonitor.Themaximumsupportedresolutionis4096x2160@24Hz

or3840x2160@60Hz,buttheactualresolutionssupportedaredependentonthemonitorbeingused.

After installing the DisplayPort device, make sure the default device for sound playback is the

DisplayPortdevice.(Theitemnamemaydifferfromoperatingsystem.RefertotheHDMIsettings

informationonthepreviouspageforthecongurationdialogbox.)

Activity LED

Connection/

Speed LED

LANPort

Activity LED:Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off Nodatatransmissionorreceivingisoccurring

Page is loading ...

Gigabyte GA-H97-GAMING 3 (REV. 1.0) User manual

Gigabyte GA-H97-GAMING 3 (REV. 1.0) User manual

Related papers

Other documents