Ibiza Sound DJ1000MKII Owner's manual

MANUAL

POWERED DJ STATION 2X480W

DJM102: p. 1 - 23

GLOBAL-DJ: p. 24-40

AMP600: p. 41-52

Ref.

DJ1000MKII

6-Channel Mixer

LEFT CHANNEL

FREQUENCY, HZ

RIGHT

C

H

A

NN

E

L

MICROPHONE

1

0

+

1

0

+

8

+

6

+

4

+

2

0

-

2

-

4

30 60 120 250 500 1K 2K 4K 8K

1

6

K

L

-36

-3

1

R

-26

-23

-20

-16 -11

-6

-3

0

d

B

+

3

+

6

d

B

30 60 120 250 500 1K 2K 4K 8K

1

6

K

+

1

0

+

8

+

6

+

4

+

2

0

-

2

-

4

LAMP 1

2

V

T

RE

B

LE

-30

+

1

0

-

6

-

8

-

1

0

P R

O F E

S S

I O

N A L M

I

X

E

R

-

6

-

8

-

1

0

M

I

D

0

-30

+

1

0

K

I

LL

M

I

N

M

AX

G

A

I

N

M

I

N

M

AX

G

A

I

N

M

I

N

M

AX

G

A

I

N

M

I

N

M

AX

G

A

I

N

L R

B

A

L

A

N

CE

L R

B

A

L

A

N

CE

E

C

H

O

OFF O

N

E

QU

A

L

I

Z

ER

O

N

/

O

FF

0

K

I

LL

PH 1

/

L

I

N

E

1 LINE

2

CUE

1

PH

2

/

L

I

N

E

3

LINE

4

CUE

2

LINE

5

LINE

6

CUE

3

CUE

4

LINE

7

LINE

8

MONO STEREO MONO STEREO

D

E

L

A

Y

EFFEC

T

B

A

SS

-30

+

1

0

1

0

O

N

/

O

FF

K

I

LL

R

E

P

E

A

T

H

E

A

D

P

H

O

N

E

MIC

1

MIN

MAX

0

1

0

MIN

MAX

CU

E

L

E

V

E

L

MIC

2

MIN

MAX

TALK OVER

ON

CH

4

CH

3

CRO

SS

F

A

D

ER

A

OF F CH

1

SOUND

EFFEC

TS

LASER MACHINE TRON RIM SH

O

T

F

/

X

SP

EE

D

F

/

X

V

O

LU

M

E

0

1

0

PR

OG

R

AM

OFF

M

IC

R

O

PH

O

N

E

CH

2

CH

1

OF F

CH

2

CH

3

B

CH

4

G

UN

B

L

A

ST

-10

+

1

0

MIN

MAX

CU

E

CHANNEL A

A

SS

IG

N

CHANNEL B ASSIGN

SIREN

EMERGENCY

UFO C

YM

B

A

L

F

/

X

C

U

E

DJM102

djm102

-1

Safety

Precaution

Read all documentations carefully before operating the equipment. Retain this manual for future

reference. Follow all instructions printed on unit for proper operation.

Wa

rn

in

g

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Do not open cover (or back cover) to reduce the risk of electric shock or fire.

There are no user serviceable parts inside. Refer servicing to qualified service

Personnel.

This symbol is used to alert the operator to the presence of important operating

instructions and precautions detailed in the documentation manual.

This symbol is used to warn operators that uninsulated dangerous voltages are

present within the products enclosure that may pose a risk of electric shock.

Warning: To avoid fire or risk of electric shock, do not expose this unit to rain or moisture.

Notes:

Make sure power outlets conform to the power requirements listed on the back of the unit.

Main voltage must be correct and the same as that printed on the rear of the unit.

Do not use the unit if the electrical cord is frayed or broken.

The unit shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on unit.

The unit shall be connected to a mains socket outlet with a protective earthing connection.

Power plug as a equipment that separate from power supply system, it must be easy to

operating.

Warning:

Using, adjusting or changing program control beyond this specification may cause dangerous

radiation.

The unit should be serviced by qualified service personnel.

When repairing, use only same specification parts.

Notes:

Select the voltage requirement through the voltage selector switch at the real panel.

Make sure that the power of the equipment is off and disconnected from the main voltage

before switching the voltage selector to the required setting. We will not be responsible

for damages arising from the improper installation, wiring or operation due to the fault or

negligence of the user.

Record your model and serial number here:

Model: Serial

Number:

-2

For Your

Attention

Importance:

1) Read manual----Please read through safety and operating instruction carefully before using this unit.

2) Keep manual----Please keep this manual for future reference.

3) Attach importance to warning and note----Please operate it according warning and note of manual.

4) Do it according what the manual indicates----Do it according to instruction of manual.

5) Water and moisture----Position of the unit don't close to water. e.g. close to bath, wash by tub, washtub,

water basin in kitchen, moist floor or natatorium and so on.

6) Carriage and rack----The unit ought to match carriage and rack that manufacturer recommended.

Please be careful while carriage with the unit is moving.

Sudden stop, great power and rough surface may cause combination turns over.

7) Fix on wall or ceiling----Manufacturer suggest product only be fixed on wall or ceiling .

8) Heat---- Device do not leave heat source such as radiator, stove and amplifier etc.

9) Power supply----The unit only operate with rated power supply. Please ask dealer or local power

supply company while not ensure type of power supply. If operating with batteries or other power supply,

please refer to this booklet.

10) Connecting ground or polarization----Perhaps this unit has a polarization AC plug. This plug only has a

method to be inserted. Its characteristic is safety.

11) Power cord protect----Power cord do not be trampled or be pressed.

12) Clean----Clean this unit with a soft cloth. Prevent water to enter into inner.

13) For device with AC power cord, check AC plug sheet and all of exposed metal parts with ohmmeter

before using, and resistance ought to be more than 100K ohm.

14) Stop period ---- Unplug the power cord if the unit is not used for a long time.

15) Prevent solid and liquid to enter into unit----Be carefully, do not fall solid or spatter liquid at hole of unit.

16) Mangle for repair----If cause following case, refer to qualified service personnel:

A) Power cord or plug mangle; or

B) Inside of unit have falling solid or liquid; or

C) The unit be rained; or

D) Device do not work; or

E) The unit be fallen, or cover be mangle.

17) Repair----User do not repair unit except operating to depend on manual instruction. All of above

symptoms should refer to qualified service personnel.

18) Ventilation----Function of cover's interval and hole is ventilation. It ensure operating reliability and

prevent to overheat. Do not cover this hole absolutely. Do not place unit on bed, blanket, sofa or

similar object's surface. Do not place unit in object's inner, such as bookcase's inner, Shelf's inner etc.

19) Accessories----Not use parts that manufactory do not recommend in order to avoid damage.

20) Auxiliary equipment----Do not place this unit on unstable vehicle, shelf, tripod or table. It will cause

serious harm to child or adult if the unit be fallen. Please use the vehicle, shelf, tripod or table that

manufactory recommend.

21) Preventing thunderbolt----Add preventing thunderbolt equipment, or if the unit is not used for a long

time, unplug the power cord.

22) Replace parts----If the unit require replacing part, you must replace with manufactory recommend,

or same characteristic part.

23) Safety check----After repairing, repairer must test the unit for security.

-3

Note On

Use

Allow for sufficient heat dispersion when installed on a rack.

1) Handle the power cord carefully.

Hold the plug when unplugging the cord.

2) Keep the set free from moisture, water and dust.

3) Unplug the power cord when not using the set for long periods of time.

4) Do not obstruct the ventilation holes.(For sets with ventilation holes.)

5) Do not let foreign objects in the set.

6) Do not let insecticides, benzene, and thinner come in contact with the set.

Front

Panel

1 2 3 4 5 6 7 8 9

10 11

12 13 14 15 16 17 18 19 20 21

LEFT CHANNEL

FREQUENCY, HZ

RIGHT

C

H

A

NN

E

L

MICROPHONE

1

0

+

1

0

+

8

+

6

+

4

+

2

0

-

2

-

4

30 60 120 250 500 1K 2K 4K 8K

1

6

K

L

-36

-3

1

R

-26

-23

-20

-16 -11

-6

-3

0

d

B

+

3

+

6

d

B

30 60 120 250 500 1K 2K 4K 8K

1

6

K

+

1

0

+

8

+

6

+

4

+

2

0

-

2

-

4

LAMP 1

2

V

T

RE

B

LE

-30

+

1

0

-

6

-

8

-

1

0

P R

O F E

S S

I O

N A L M

I

X

E

R

-

6

-

8

-

1

0

M

I

D

0

-30

+

1

0

K

I

LL

M

I

N

M

AX

G

A

I

N

M

I

N

M

AX

G

A

I

N

M

I

N

M

AX

G

A

I

N

M

I

N

M

AX

G

A

I

N

L R

B

A

L

A

N

CE

L R

B

A

L

A

N

CE

E

C

H

O

OFF O

N

E

QU

A

L

I

Z

ER

O

N

/

O

FF

0

K

I

LL

PH 1

/

L

I

N

E

1 LINE

2

CUE

1

PH

2

/

L

I

N

E

3

LINE

4

CUE

2

LINE

5

LINE

6

CUE

3

CUE

4

LINE

7

LINE

8

MONO STEREO MONO STEREO

D

E

L

A

Y

EFFEC

T

B

A

SS

-30

+

1

0

1

0

O

N

/

O

FF

K

I

LL

R

E

P

E

A

T

H

E

A

D

P

H

O

N

E

MIC

1

MIN

MAX

0

1

0

MIN

MAX

CU

E

L

E

V

E

L

MIC

2

MIN

MAX

TALK OVER

ON

CH

4

CH

3

CRO

SS

F

A

D

ER

A

OF F CH

1

SOUND

EFFEC

TS

LASER MACHINE TRON RIM SH

O

T

F

/

X

SP

EE

D

F

/

X

V

O

LU

M

E

0

1

0

PR

OG

R

AM

OFF

M

IC

R

O

PH

O

N

E

CH

2

CH

1

OF F

CH

2

CH

3

B

CH

4

G

UN

B

L

A

ST

-10

+

1

0

MIN

MAX

CU

E

CHANNEL A

A

SS

IG

N

CHANNEL B ASSIGN

SIREN

EMERGENCY

UFO C

YM

B

A

L

F

/

X

C

U

E

22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

1) MIC MID

This knob adjusts the middle tone of the microphone.

2) MIC TREBLE

This knob adjusts the high tone of the microphone.

3) MIC INPUT JACK

Connect your MIC at this location.

-4

4) KILL FOR TREBLE

Press it to kill microphone treble volume, and indicator light.

5) KILL FOR MID

Press it to kill microphone middle volume, and indicator light.

6) EQUALIZER

Allow you to tailor the mixer output to suit be cut or boost by up to 10 dB.

7) CHANNEL GAIN

This rotary control adjusts the input level.

8) CHANNEL CUE

Use it to monitor the selected audio input source.

9) CHANNEL INPUT SELECTOR

Let you to choose the input source to play for each channel.

10) CHANNEL LEVEL CONTROL

Let you control mixer's overall channel volume level.

11) DISPLAY METER

Indicate the levels of left and right master channels.

12) MASTER MONO/STEREO SELECTOR

Select mono mode or stereo mode.

13) MASTER BALANCE CONTROL

Let you adjust master balance.

14) MASTER LEVEL CONTROL

Let you control mixer's overall master volume level.

15) ZONE MONO/STEREO SELECTOR

Select mono mode or stereo mode.

16) ZONE BALANCE CONTROL

Let you adjust zone balance.

17) ZONE LEVEL CONTROL

Let you control mixer's overall zone volume level.

18) ECHO ON/OFF

Turn echo on or off.

19) ECHO DELAY CONTROL

Let you adjust the delay time for the echo.

20) 12V POWER SUPPLY JACK

Allow you to connect 12v power supply via this jack.

21) EQUALIZER ON/OFF

Press it to turn equalizer on, the indicator light.

22) MIC BASS

This knob adjusts the bass tone of the microphone.

23) MIC LEVEL CONTROL

Let you control the MIC level as they enter the mix.

-5

24) MIC TALK OVER

There are talk over, MIC on and MIC off function. The Sound Pressure Level of audio from input sources

will be decreased while TALK OVER mode is set.

25) MIC CUE

Use it to monitor the MIC input source.

26) KILL FOR BASS

Press it to kill microphone bass volume, and indicator light.

27) CHANNEL ASSIGN SELECTOR

Let you select the input source to be mixed by the crossfader control.

28) CROSSFADER

Allow you to smoothly switch between the input sources assigned to channel A and channel B.

29) SOUND EFFECTS

Let you create special sound performance mixes from the eight preprogrammed special effects.

30) SOUND EFFECTS SPEED CONTROL

Let you control the pitch of the selected sound effect.

31) SOUND EFFECTS VOLUME CONTROL

Let you control the volume level of the sound effect within the mix.

32) ECHO LEVEL CONTROL

Control the depth of the echo effect.

33) SOUND EFFECTS CUE

Let you monitor the selected sound effect before mixing it in.

34) ECHO REPEAT CONTROL

Let you control the time period during which the echo is repeated.

35) HEADPHONE CUE/PGM CONTROL

Allow you to listen simultaneously or separately to the CUE material or the active program.

36) HEADPHONE JACK

Accept headphones with 1/4" plug.

37) HEADPHONE LEVEL CONTROL

Let you to control the volume level of headphone.

38) EFFECT SWITCH (SEND/RECEIVE)

Let you connect a sound effect device, such as reverb, sampler, etc. and either play the signal from it

or play another input through it.

-6

L

I

N

E

3

LINE

2

~

P

O

W

E

R

Rear

Panel

I

N

PUT

C

A

UT

I

O

N

:

TO REDUCE THE RISK OF FIRE,

REPLACE ONLY WITH THE S

A

M

E

TYPE AND R ATING OF FUS

E

.

C

A

UT I

O

N

R

I

SK

O

F

EL ECTR IC SH

OC

K

.

D

O

N

O

T

O

P

E

N

!

O

UTPUT

RECEIVE

SEND LINE

8

LINE

7

LINE

6

LINE

5

LINE

4

PHONO

2

PHONO

1

L

I

N

E

1

R

L

AM

P

Z

O

N

E REC

230

V

~

11

5

V

~

VOLTAGE

R

L

FUSE F

0

.

5A

L

250

V

11

5

V

/

230

V

60

/

50

H

z

1

5

W

MADE IN

C

H

I

N

A

R

AM

P

Z

O

N

E

REC

I

N

PUT

S

ELEC

T

RECEIVE

SEND LINE

8

LINE

7

LINE

6

LINE

5

LINE

4

LINE

3

PHONO

2

LINE

2

LINE

1

I

N

PUT

S

ELEC

T

PHONO

1

MIC

2

GROUND

1 2 3 4 5 6 7 8 9

10 11

1) POWER SUPPLY

Include AC input and power switch.

Use this switch to turn on the unit after all input devices are already connected to prevent damage to

your equipment. Turn the mixer on before you turn on amplifiers and turn of amplifiers before you turn

off the mixer.

2) VOLTAGE SELECTOR

Select voltage which you need.

3) 1 / 4" OUTPUT JACKS

Connect the mixer to a receiver use cables with 1 / 4" plugs.

4) AMP OUTPUT JACKS

Connect the mixer to a amplifier use cables.

5) ZONE OUTPUT JACKS

Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote

location.

6) RECORD OUTPUT JACKS

Connect the mixer to a tape deck for recording the mixed program.

7) EFFECTS SEND/RECEIVE JACKS

Permit you to either include externally generated effects (such as a digital sampler) in the mix, or to

process the mixed sound (echo reverb, etc.).

8) LINE INPUTS

Let you connect most high-level audio sources, such as CD players, tape deck, tuner or VCR.

9) INPUT SELECTOR

Set these switches based on what is plugged into Phono /Line input jacks.

10) MIC JACK

Microphones with a 1 / 4" connector can be connected to these input terminals.

11) GROUND

Ground Screw for turntables.

-7

Specifications

Input Sensitivity/Impedance

MIC 1-2 -----------------------------------------------------------------------------------1.5 mV/600 Ohms, bal/unbal

Phono 1-2 -------------------------------------------------------------------------------------------- 3.0 mV/50K Ohms

Line 1-8 ---------------------------------------------------------------------------------------------150.0 mV/27K Ohms

Output Level

Amp ------------------------------------------------------------------------------------------------------- 2.0 V/10K Ohms

Zone ------------------------------------------------------------------------------------------------------ 2.0 V/10K Ohms

Record ------------------------------------------------------------------------------------------------- 150mV/10K Ohms

Frequency Response ---------------------------------------------------------------------------- 20Hz - 20kHz +/- 3 dB

S/N Ratio (at 1 kHz)

MIC ---------------------------------------------------------------------------------------------------- >60 dB/1.5mV input

Phono ------------------------------------------------------------------------------------------------ >60 dB/3.0mV input

Line ----------------------------------------------------------------------------------------------- >70 dB/150.0 mV input

Distortion

MIC ----------------------------------------------------------------------------------------------------------------------- 0.2%

Phono -------------------------------------------------------------------------------------------------------------------- 0.3%

Line --------------------------------------------------------------------------------------------------------------------- 0.03%

Equalizer

Control Frequencies --------------------------------------30, 60, 120, 250, 500, 1K, 2K, 4K, 8K, and 16KHz

Boost/Cut Range-------------------------------------------------------------------------------- +/- 10 dB from center

MIC Tone Control

Treble -------------------------------------------------------------------------------------------------- 10kHz; +10/-30dB

MID ------------------------------------------------------------------------------------------------------ 1 kHz; +10/-30dB

Bass ---------------------------------------------------------------------------------------------------- 100Hz; +10/-30dB

Talk over Attenuation -------------------------------------------------------------------------------------------------- -16dB

Echo Delay Time --------------------------------------------------------------------------------------------50mS - 120mS

Headphone output power -----------------------------------------------------------------------------30mW @32 Ohms

Power Source ---------------------------------------------------------------------- 115 V AC, 60Hz/230 V AC, 50 Hz

Consumed power-------------------------------------------------------------------------------------------------------- 20 W

Dimensions (W X D X H)---------------------------------------------------------------------------- 482 x 105 x 240mm

Weight ----------------------------------------------------------------------------------------------------------------------3.5 kg

Design and specifications are subject to change without notice.

Electric products must not be put into household waste. Please bring them to a recycling

centre. Ask your local authorities or your dealer about the way to proceed.

Page is loading ...

L

E

I

T

O

R

C

D

U

P

L

O

C

O

M

U

S

B

-

M

P

3

E

C

A

R

T

Ã

O

S

D

O

U

B

L

E

C

D

P

L

A

Y

E

R

W

I

T

H

U

S

B

-

M

P

3

&

S

D

C

A

R

D

O

U

B

L

E

L

E

C

T

E

U

R

C

D

A

V

E

C

L

E

C

T

E

U

R

U

S

B

-

M

P

3

&

S

D

U

A

L

C

D

-

S

P

I

E

L

E

R

M

I

T

U

S

B

-

M

P

3

&

S

D

K

A

R

T

E

N

L

E

S

E

R

D

U

B

E

L

E

C

D

-

S

P

E

L

E

R

M

E

T

U

S

B

-

M

P

3

&

S

D

-

K

A

R

T

PT - MANUAL DE INSTRUÇÕES

GB - USER MANUAL

F - MANUEL D’UTILISATION

D - BEDIENUNGSANLEITUNG

NL - HANDLEIDING

Ref.: GLOBAL-DJ (15-2210)

Page is loading ...

GB

Electric products must not be put into household waste. Please bring them to a recycling

centre. Ask your local authorities or your dealer about the way to proceed.

Page is loading ...

2

MAGNETIC FIELD

CHAMPS

MAGNETIQUE

MAGNETFELD

MAGNETISCH VELD

CAUTION! Do not locate

sensitive high gain

equipment such as

preamplifiers or tape decks

directly above or below the

unit. This unit has a strong

magnetic field which can

induce hum into unshielded

devices that are located

nearby. The field has

strongest spots just above

and below the unit. Locate

the amplifier at the bottom of

the rack and the preamplifier

or other sensitive equipment

at the top.

ATTENTION: Ne pas placer

des appareils sensibles tels que

des préamplificateurs ou

lecteurs de cassettes

directement au dessus ou en

dessous de l’appareil.

L’amplificateur possède un

champ magnétique puissant qui

peut provoquer des

interférences dans des

appareils non blindés qui se

trouvent à proximité. Les points

les plus forts se trouvent en-

dessous et au-dessus de

l’appareil. Placez l’amplificateur

en bas du rack et le

préamplificateur et autres

appareils sensibles au-dessus.

VORSICHT ! Keine

empfindlichen Geräte wie

Vorverstärker oder

Kassettenrekorder auf oder

unter den Verstärker

stellen. Der Verstärker

besitzt ein starkes

Magnetfeld, das bei nicht

abgeschirmten Geräten

Brummgeräusche

verursacht. Die stärksten

Punkte befinden sich auf

und unter dem Gerät.

Wenn Sie den Verstärker

in ein Geräterack

einbauen, installieren Sie

ihn ganz unten im Rack

und alle anderen Geräte

darüber.

Opgepast! Geen gevoelige

apparaten zoals

voorversterkers of

cassetterecorders direct aan

de boven- of onderkant van

het apparaat plaatsen. De

versterker bezit een machtig

magnetisch veld dat

stoornissen in niet

gepantserde apparaten, die

zich in nabijheid bevinden,

kan veroorzaken. De sterkste

punten bevinden zich onder

en boven het apparaat.

Plaatst de versterker onder

de rack en de voorversterker

en andere gevoelige

apparaten erop.

CAUTION

RISKOF ELECTRIC

SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC

ELECTRIQUE

NE PAS OUVRIR

VORSICHT

STROMSCHLAG-

GEFAHR

NICHT ÖFFNEN

OPGESPAST

RISICO VOOR

ELECTRISCHE

SCHOK NIET

OPENEN

To prevent electric shock,

do not remove top or bottom

covers. No user serviceable

parts inside. Refer servicing

to qualified servicing

personnel. Disconnect

power cord before removing

back panel cover to access

gain switch.

Afin d’éviter un choc électrique,

ne pas retirer le couvercle

supérieur ou inférieur. Le boîtier

ne contient pas de pièces

remplaçables par l’utilisateur.

Toutes les réparations doivent

être effectuées par du personnel

qualifié. Débranchez le cordon

d’alimentation avant d’ouvrir le

panneau arrière pour accéder au

contrôle de gain.

Um Stromschlag zu

vermeiden, nicht das

Gehäuse öffnen. Es enthält

keine vom Benutzer

auswechselbaren Teile.

Reparaturen dürfen nur von

Fachpersonal ausgeführt

werden. Netzkabel abziehen,

bevor Sie die Rückwand

öffnen, um Zugang zum Gain

Regler zu bekommen.

Verwijder niet het bovenste

of onderste deksel,

teneinde een elektrische

schok te vermijden. De

doos bevat geen stukken

vervangbaar door de

gebruiker. Alle reparaties

moeten door gekwalificeerd

personeel uitgevoerd

worden. Schakel het

voedingstouw uit alvorens

het achter paneel te

openen om de controle van

de versterker te bereiken.

WARNING! To reduce the risk of electric shock, do not expose this equipment

to rain or moisture!

AVERTISSEMENT! Afin de réduire le risque de choc électrique, ne pas

exposer cet appareil à l’humidité ou à la pluie !

WARNUNG ! Um Stromschlag zu vermeiden, das Gerät vor Regen und

Feuchtigkeit schützen!

WAARSCHUWING! Stel het apparaat niet bloot aan vocht of regen, teneinde

het schokrisico te verminderen

The exclamation point triangle is used to alert the user to important operating or maintenance

instructions

Le triangle avec le point d’exclamation attire l’attention de l’utilisateur sur des instructions

d’utilisation ou de maintenance importantes.

Das Dreieck mit dem Ausrufezeichen lenkt die Aufmerksamkeit des Benutzers auf wichtige

Bedienungs- und Wartungshinweise

De driehoek met het uitroepteken vestigt de aandacht van de gebruiker op belangrijke gebruik- of

onderhoudinstructies.

The lighting bolt triangle is used to alert the user to the risk of electric shock

L’éclair dans le triangle attire l’attention de l’utilisateur sur un risqué de choc électrique

Der Blitz im Dreieck lenkt die Aufmerksamkeit des Benutzers auf ein Stromschlagrisiko.

De bliksem in de driehoek vestigt de aandacht van de gebruiker op een elektrische schokrisico.

3

FRONT PANEL – FACADE – FRONTSEITE - VOORZIJDE

REAR SIDE – ARRIERE – RÜCKSEITE - ACHTERZIJDE

4

GB

Front panel controls :

1. On/Off switch with Power LED

2. Gain Control

Input gain control allowing to attenuate the input signal that is sent to the various channels of the amplifier.

The dB control range is as follows:

Fully closed (the signal is at zero and not sent to the channels of the amplifier) or fully open (i.e. at rated

power: the signal is not attenuated at all and sent at the input power into the amplifier channels).

3. LED Display

Shows the master output level.

Rear connections

1. Line input

Jack sockets : These sockets are connected in parallel to the corresponding RCA connectors. Thus, you can

connect a second amplifier in series to the first unit to send the same signal into several amplifiers in order to

increase the audio power.

2. Speaker outputs

Binding posts or XLR/Jack (minimum load 4 Ohms)

Note : To avoid damage to the speakers, only use speakers that have the same impedance and power rating as

the amplifier. Only use speaker cables and never signal cables as those used for microphones, music instruments

and audio equipment in general.

3. Power supply

Mains

SPECIFICATIONS

AMP-300

AMP-600

AMP-800

AMP-1000

Music power

2 x 240W 4

2 x 160W 8 

2 x 480W 4

2 x 320W 8 

2 x 600W 4

2 x 400W 8 

2 x 800W 4

2 x 600W 8 

Total harmonic

distorsion

≥0,5%

Freq. Range

20 – 20.000Hz)

≥0,5dB

Noise

≥98dB

Channel separation

(f=1kHz)

≥82dB

Input level

≥0dB

Input impedance

≥10k

Power supply

230Vac, 50-60Hz

INSTALLATION

Electrical Connections

Prior to connecting the amplifier on a wall outlet, check following points

 The mains outlet must be earthed and comply with the safety regulations. If in doubt, ask and electrician.

 The mains voltage must correspond to the supply voltage indicated on the rear panel (+/-10%)

 The On /Off switch must be in OFF position

 The amplifier must be switched off prior to unplugging the mains lead.

Power On/Off

Always switch on the amplifier at last and switch it off at first in your audio installation. Set all controls to the

minimum in order to avoid unpleasant and even dangerous noise.

Installation and Operation

Your amplifier is a high power unit that must be installed at a well ventilated place far from heat, humidity, shocks

and dust to avoid malfunction, defaults, electrical shocks and the risk of fire. The cooling air enters via the front

panel and leaves via the rear panel. The good ventilation is therefore of paramount importance. If you install the

amplifier in an equipment rack or a flight case, make sure not to obstruct the air flow. Never install the amplifier in

a closed rack or flight case as a part of the heat is evacuated by the metal ground plate. It is recommended to

leave at least one free space below the amplifier.

Audio Connections

Prior to making any connections, switch off all units that you wish to interconnect. Only use high quality leads that

are suitable for this application. Handle the cables with care and check the air flow regularly. Only pull the plugs,

never the cable. Do not use force to unplug a lead. Always roll the cables without making knots or bending them

in order to ensure a long lifetime, proper operation and optimal performance.

5

Prevention and Detection of Interference

Make sure to install the amplifier in a place far away from industrial and high frequency radiations. Avoid to install

the amplifier near a radio, TV or mobile phone. These equipments are sources of interference.

When you connect the other components of your installation, avoid the constitution of ground loops that are

detrimental to the excellent sound qualities of the amplifier and potentially dangerous. He best way (although not

always achievable) to avoid ground loops is to connect the ground of all components to a central point (star

connection). The central point of a sound installation is the mixer.

In order to determine the cause of interference, connect the different sections of the mixer in the following

sequence to the other units. Only make the next connection once you have checked the sound of the actual one.

Outputs : Amplifier and speakers (Master outputs)

Amplifier and monitor speakers (AUX outputs)

Effect units (AUX outputs ord effect in/outputs)

Inputs : Instruments with line signal (keyboards, samplers, recorders, etc.)

Microphones (one after the other)

WARNINGS

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily

operable.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be

placed on the apparatus.

Page is loading ...

Ibiza Sound DJ1000MKII Owner's manual

Ibiza Sound DJ1000MKII Owner's manual

in other languages

Related papers

Other documents