Bellini BC604T User manual

Brand: Bellini

Model: BC604T

Category: Cookers

Type: User manual

啊哈

Installation and User manual

Content

Safety instructions-----------------------------------2

Features of your product---------------------------4

Installing the appliance-----------------------------4

Start using your appliance-------------------------7

Maintenance and troubleshooting---------------9

Warranty-----------------------------------------------10

20130304 issue 8

60cm Built-In Ceramic

Cooktop

BC604T

BC604T-F

BDC604OT

BDC604OT-F

For warranty service call 1300 373 199 (Australia)

or 0508 123108 (New Zealand) to connect you to

the nearest authorised service centre

Safety Instructions

This manual explains the proper installation and use of your appliance, please read it carefully before using

even if you are familiar with the product. The manual should be kept in a safe place for future reference. In case

of failure, all electrical work/repairs must be carried out by a suitable and authorised electrician or service agent,

otherwise the guarantee will be null and void.

Warning

General safety

z The appliance must only be installed and

connected by licensed Electrician or Service

Agent.

z Built-in appliances may only be used after they

have been built in to suitable built-in cabinets and

work surfaces that meet standards.

z In the event of faults with the appliance or

damage to the ceramic glass (cracks, scratches

or splits), the appliance must be switched off and

disconnected from the electrical supply, to

prevent the possibility of an electric shock.

z Repairs to the appliance must only be carried out

by Licensed Electrician or Service Agent.

z The technical and identification data for the

cooktop are displayed on the reference plate fixed

to the appliance.

z This reference plate must be referred to before

making the electrical connections.

z The electrical connections must be made by

licensed Electrician or Service Agent familiar

with the legal and regulatory requirements within

each State or Territory

z This appliance is not intended to be operated by

means of an external timer or separate remote

control system.

z Means for disconnection must be incorporated in

the fixed wiring in accordance with the wiring rules.

The fixed wiring insulation must be protected, for

example, by insulated sleeve with appropriate

temperature rating.

Correct Use

z People (including children) who, because of their

physical, sensory or mental capabilities or their

inexperience or ignorance are not able to use the

device safely, should not use without supervision

or instruction by a responsible person.

z This appliance should be used only for normal

domestic cooking and frying of food.

z The appliance must not be used as a work

surface or as a storage surface.

z Additions or modifications to the appliance are

not permitted.

z Do not place or store flammable liquids, highly

inflammable materials or fusible objects (e.g.

plastic film, plastic, aluminum) on or near the

appliance.

z Do not heat an empty pan on the appliance.

Children’s Safety

z The cooking zones will become hot when you

cook. Therefore, always keep small children

away from the appliance.

z The appliance is not intended for use by

young children or infirm persons without

supervision.

z Young children should be supervised to

ensure that they do not play with the

appliance.

z To avoid small children or pets unintentionally

switching the appliance on, we recommend

activation of the child safety device.

Safety During Use

z Remove stickers and film from the ceramic

glass.

z There is the risk of burns from the appliance if

used carelessly.

z Cables from electrical appliances must not

touch the hot surface of the appliance or hot

cookware.

z Overheated fats and oils can ignite very

quickly. Warning! Fire hazard!

z Switch the cooking zones off after each use.

z Users with implanted pacemakers should

keep their upper body at least 30cm from

ceramic cooking zones that are switched on.

z Do not place objects made of metal, such as

knives, forks, spoons and saucepan lids on

the cooking surface, as they can get hot.

Safety Instructions

Safety When Cleaning

z For cleaning, the appliance must be switched off

and cooled down.

z For safety reasons, the cleaning of the

appliance with steam jet or high pressure

cleaning equipment is not permitted.

How To Avoid Damage To The Appliance

z The ceramic glass can be damaged by objects

falling onto it.

z The edge of the glass ceramic can be damaged

by being knocked by the cookware.

z Cookware made of cast iron, cast aluminum or

with damaged bottoms can scratch the glass

ceramic if pushed across the surface.

z Objects that melt and things that boil over can

burn onto the ceramic glass and should be

removed straightaway.

z Do not use the cooking zones with empty

cookware or without cookware.

z To avoid damaging cookware and glass

ceramics, do not allow saucepans or frying pans

to boil dry.

z The ventilation gap of 5mm between the

benchtop and front of the unit underneath the

cooking plate must not be covered.

Disposing Of Appliance

When disposing of this appliance, do not place in a regular municipal waste container. Instead, bring it to an

electrical and electronic waste recycling and reuse centre. A relevant label has been put on the appliance, its

instruction manual, or the packaging. The appliance has been manufactured with recyclable material. By taking

old appliances to recycling and reuse centres, shows that you care about the environment. Ask your local

environmental care authority for information on the location of such facilities.

Features Of Your Cooktop

Control Panel

Technical Data

Model

Product Dimensions

(h x w x d) mm

BC604T, BC604T-F 46x590x520

Electrical

Connection

Max. Power

Rating

220-240V a.c 50Hz 6000 W

Heating Elements

1a 1200 W Ø 140mm

2a 1800 W Ø 180mm

3a 1200 W Ø 140mm

4a 1800 W Ø 180mm

Technical Data

Model

Product Dimensions

(h x w x d) mm

BDC604OT,

BDC604OT-F

46x590x520

Electrical

Connection

Max. Power

Rating

220-240V a.c 50Hz 6700 W

Heating Elements

1a 1200 W Ø 145mm

2a 2200 W Ø 170 x 265mm

3a 1200 W Ø 145mm

4a 2100 W Ø 120/220mm

Control Panel

Installing The Appliance

Important:

z There must be a minimum distance of 65mm from rear wall of cabinet

Preparation

z Remove any dust from the benchtop directly surrounding the cut hole to ensure there is a clean surface.

z Remove the protective paper film from the adhesive strip that is secured to the bottom of the glass

surface.

z Position the cooktop into the hole in the benchtop and press down firmly to ensure a secure fit to the

benchtop.

1. Benchtop

2. Ceramic Cooktop

3. Adhesive Seal

Installing The Appliance

Electrical Connection

Caution:

z The appliance must only be installed and connected by a Licensed Electrician or Service Agent.

z If the mains supply where the cooktop is to be installed is different from 220...240V~,make the connection

as shown in the enclosed diagrams. (The cable must be able to withstand temperatures of 120°C).

Open terminal board cover at rear panel of appliance and connect as per below diagram for 220V – 240V

earthed single phase. Close the cover after complete electrical connection.

Start Using Your Appliance

Control Panel of BC604T and BC604T-F

Items Description Explanation

Cooking zone selectors By pressing any of the 4 selector keys, the

corresponding zone is selected for operation.

The respective LED Display for that zone will flash

for 6 Seconds on setting 9.

Pressing Control Key twice will turn OFF

corresponding zone quickly.

Power level adjustor In conjunction with the selector keys and within the 6

seconds LED flash period, press + or – to adjust till

desired power level is displayed, cooking zone will

start working when flashing stopped.

Residual heat indicator When a heating zone is turned OFF, a “H” will

probably show in the LED Display to alert the zone

are is still hot and must not touch. It will disappear

when area has cooled down enough to touch.

Child lock indicator light(LED1) This light ON indicates that child lock is activated and

all keys are locked for unintended use, this indicator

light will also turn ON if no zone is operated over 5

seconds.

Child lock key Press the Child lock key for 3 Seconds to lock or

unlock the operation of Control Keys.

Control Panel of BDC604OT and BDC604OT-F

Items Description Explanation

Power level

display

Timer activated

indication light

From lowest level 1 to highest power

level 9.

LED light turns ON at left-top of each

power level display is telling which zone

is under timer setting. Example as left

illustration is telling cooking zone 2a

(Oval dual zone) is under timer setting.

Key 1 Circular dual zone 4a. press

continuously can let the zone

function loop as “central zone

– central & outer zone – off”

Key 2 Zone 1a

Key 3 Oval dual zone 2a, press

continuously can let the zone

function loop as “central zone

– central & outer zone – off”

1 2 3 4

Cooking zone

selectors

Key 4 Zone 3a

¾ You can set Timer for only one cooking zone at a time.

¾ Each cooking zone has safety protective cut-off design,

if a zone set at power level 9 and keep working for 1

hour without any operation then it will be turned off

automatically.

Timer key

After cooking zone and power level

chosen, immediately press Timer key

can enter into timer setting, press + or –

to adjust duration you would like the

zone keep working. Duration you can

set is 1 – 99 minutes. After all set up,

leave keys for 5 seconds then timer

display start countdown.

To cancel Timer setting, press cooking

zone selector, then press Timer key

again when display is flashing.

Timer display It countdown when timer set to tell how

many minutes working time left.

Power level/

Timer adjustor

Press key 1 to 4 to choose cooking

zone, then press + or – when display is

flashing to choose desired power level.

If you want to set up timer, then press

Timer key when display is flashing to

enter into Timer setting.

Cooking zone will start working when

flashing stopped.

Child lock

indicator light

This light ON indicates that child lock is

activated and all keys are locked for

unintended use, this indicator light will

also turn ON if no zone is operated over

5 seconds.

Child lock key

Press the Child lock key for 3 Seconds

to lock or unlock the operation of

Control Keys.

Residual heat

indicator

When a heating zone is turned OFF, a

“H” will probably displayed to alert the

zone area is still hot and must not

touch. It will disappear when area has

cooled down enough to touch.

Start Using Your Appliance

Selecting The Correct Pan

z Choose a pan with a diameter that is at least as large as the heating zone.

z Do not use pans with a concave, convex or a rough base, ensure to select flat bottom pans .

z Always remember to put the correct lid on the pan.

Warning:

z Avoid scraping the glass of the cooktop when you move the pans. Lift them up to move.

z Never heat an empty pan.

NEVER HEAT AN EMPTY PAN

Maintenance & Troubleshooting

Caution:

z Spills and splashes will not harden and stick to the glass, as it hardly heats up.

z Vitro-ceramic should however be cleaned of any spills or splashes as quickly as possible.

z Slight stains can be removed with kitchen paper or cloth.

z More resistant stains will need specific product for vitro-ceramic glass. Follow each product’s inductions.

Important:

z Do not use abrasive products or cleaning powders as these could scratch the cooktop.

z Do not use a steam cleaner.

z If any cracks should appear on the surface of the glass, unplug the appliance immediately.

z Do not use any part of the cooktop until a new vitro-ceramic glass has been installed.

Problem Possible Causes What Shall I do

Heating progress sounds halt Internal thermostat is working to

avoid over heat.

Wait for a while, it restarts automatically.

The cooktop continues to

ventilate for several minutes

after switching off.

The electronic circuits are cooling

down.

This is normal.

WARRANTY

1.1 In this warranty:

1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the Competition and

Consumer Act 2010;

1.1.2 Company means GSM Sales Pty Ltd ABN 53 007 682 475 of 142-144 Fullarton Road, Rose

Park SA 5067. Telephone 08 8122 2390. Email [email protected]

1.1.3 Consumer means a “consumer” as that term is defined in Section 3 of the Australian Consumer

Law as the original purchaser of a Bellini product;

1.1.4 Consumer Guarantees means the guarantees under the Australian Consumer Law;

1.1.5 You means the Consumer.

1.2 Nothing in this warranty affects any person’s rights under the Australian Consumer Law. The benefits to

any Consumer under this warranty are in addition to the rights and remedies available under any

Consumer Guarantees.

1.3 Subject to the other clauses of this warranty, the Company warrants to the Consumer that the Bellini

product will be free of manufacturing defects and will perform to the Company’s specifications.

1.4 The benefit of this warranty extends only to the Consumer as original purchaser of a Bellini product which

is installed in a residential property.

1.5 This warranty commences on the date of purchase of the Bellini product by the Consumer and continues

for the benefit only of the Consumer until the expiry of two (2) years (Warranty Period).

1.6 If within the Warranty Period a manufacturing defect is discovered in the Bellini product or it fails to perform

to the Company’s specifications as a result of some defect in materials, components or workmanship

(Defect) then the Company will, at its option, repair the Bellini product or supply a replacement Bellini

product free of charge. A replacement Bellini product may differ from the original product purchased by the

Consumer.

1.7 This warranty will not apply to any Bellini product:

1.7.1 Installed by any person other than a qualified tradesperson; or

1.7.2 Subjected to misuse, neglect, negligence or accidental damage; or

1.7.3 Operated in any way contrary to any operating or maintenance instructions; or

1.7.4 Improperly handled, installed or maintained; or

1.7.5 Altered or modified prior to or after installation; or

1.7.6 Damaged directly or indirectly by power surges, electrical storm damage or connection to incorrect

power supply

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY THE

CONSUMER MUST CALL 1300 373 199 (AUSTRALIA) OR 0508 123 108

(NEW ZEALAND) TO CONNECT TO THE NEAREST AUTHORISED CENTRE

TheAustralianConsumerLawrequirestheinclusionofthefollowingstatement

withthiswarranty:

Our goods come with guaranteed that cannot be excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods

fail to be of acceptable quality and the failure does not amount to a major failure.

1.8 You must provide proof of your purchase of the Bellini product and the date of purchase in order to obtain

the benefit of this warranty.

1.9 If you live outside the service area of the Company or one of its service agents, this warranty does not

cover the cost of transport of the Bellini product for service nor the service agent’s travelling costs to and

from your home.

1.10 If you are required to transport the Bellini product to the Company or its service agent, you must ensure it is

safely disconnected by a qualified tradesman and securely packed and insured. The Company does not

accept any responsibility for loss or damage of the Bellini product prior to it being received by the Company

or its service agent.

1.11 You will be responsible for all costs of returning a Bellini product to the Company and for redelivery of the

Bellini product by the Company (whether it is the original or a repaired and/or a replacement Bellini product)

and for any other expenses you incur in claiming under this warranty.

1.12 The Company or its service agent will examine any Bellini product and if the Company determines that it is

defective through no fault of the Owner and is otherwise undamaged, the Company will repair or replace

the Bellini product in accordance with this warranty.

DO NOT SEND IN THIS WARRANTY

Fill out the following details and file with your purchase invoice.

RETAIN & FILE WITH YOUR RECEIPT

Your Purchase Receipt/Invoice is proof of date of purchase. If you are unable to establish the date of purchase,

or if the fault is not covered by this warranty, or if the product is found to be in working order, you will be required

to bear all service call charges.

GSM Sales Pty Ltd reserves the right to discontinue items, modify designs and change specifications without

incurring obligation.

Whilst every effort is made to ensure that descriptions, specifications and other information in this publication is

correct, no warranty is given in respect thereof and the company shall not be liable for any errors therein.

Purchased from:

Co. Name:

Address:

Date of Purchase:

Serial number:

NOTE: Consistent with our continuing product development policy, improvements may have been made

which render the contents of this packaging slightly different to that shown.

FOR WARRANTY SERVICE CALL 1300 373 199 (AUSTRALIA)

OR 0508 123 108 (NEW ZEALAND) TO CONNECT YOU TO THE NEAREST

AUTHORISED SERVICE CENTRE

Bellini BC604T User manual

Brand: Bellini

Model: BC604T

Category: Cookers

Type: User manual

Download PDF

report

Bellini BC604T User manual

Bellini BC604T User manual

Related papers

Other documents