Kata RC-1 Specification

Category
Camera cases
Type
Specification

This manual is also suitable for

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 240303.
for Full Size Camcorders
Flexible sleeve with
strong elastic cuff
protects viewfinder
Hook & loop strap to
hold the hood in place
Materials
Crystal clear vinyl window
High density dense nylon fabric, treated with 3 layers of PU
component coating
Polypropylene shield
Fastex-ITW® nylon or acetal buckles
Roomy bottom
opening provides
easy access and
allows hands to move
comfortably
Clear vinyl panel on
camera control side with
full access from bottom
30
76 cm
12.2
31 cm
dimensions
The Rain Cover with its unique design is fabricated from waterproof
material with a crystal clear vinyl panel on the cameras control
side. The cover slips quickly over a camera to protect it from
sudden showers and is secured by a quick pull of the fore and
aft drawstrings. A stiff polypropylene hood shields the lens, while
the viewfinder is protected by a flexible sleeve with a strong elastic
cuff.
The Rain Cover successfully protected equipment during severe
weather conditions. The Rain Cover id designed for efficiency
down to the smallest detail.
Clear vinyl panel on
camera control side,
Can be folded when
necessary
KATA's RC-5VFP (Philips) and RC-5VFS (Sony) is designed
to protect the VF mounted on the camera against rain, dust and
sun (can be added to RC-1, 10).
The rounded shape of the RC's roof directs the rain to the sides
and the extra length protects against dampness from below or
from the sides.
*SOLD SEPARATELY
KATA's SPS Sungun Protective Sleeve is a modular hood designed
to protect various sized mini-lights when working in the rain.
Made with an inner layer of Aramid weave the SPS is heat
resistant.
Two modular removable sleeves enable
the extraction of Shoulder Strap,
wireless antenna, viewfinder* etc.
SPS Sungun Protective Sleeve,
can be easily added and adjusted
(sold separately)
* RC-5 Viewfinder Rain Cover,
can be easily added and adjusted
(sold separately)
RC-1*
KT / VA-801-1
Wt.
0.99 lbs
0.45 Kg
ORDER CODE
SPS*
KT / VA-801-SPS
ORDER CODE
RC-5 VFP*
KT / VA-820-101
ORDER CODE
RC-5 VFS*
KT / VA-820-102
ORDER CODE
KATA. A SIMPLE CASE
OF BETTER DESIGN.
Development & production by KATA.
POB 45078 Jerusalem , Israel 91450
Tel: +972-2-5911000
Fax: + 972-2-5400504
www.kata-bags.com
Hook & loop seams on
top provides easy
access allowing full
access to playback
controller and cassette
door.
RAIN COVERS
Double sided hook & loop stiff
polypropylene hood can be adjusted to
fit a variety of lens configurations from
the basic round lenses to the box lenses
Flexible string to
close back part
provides easy
access to the
battery
Hook & loop strap
to roll the back
part of the
raincover while
working with small
battery or external
one with
connection to wire
Maximal dimensions of camera and
accessories that fit in RC-1:
Double sided hook & loop
bottom can be closed for
use in two ways:
1. One on top of the other
- for use on shoulder
2. Side to side - wrapped
around tripod
Extra nylon
sleeves that can
be closed around
and seal the lens,
mattbox,
viewfinder, or
microphone base
for double
protection
Clear vinyl window
to view Tally light
  • Page 1 1

Kata RC-1 Specification

Category
Camera cases
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI