Gamber-Johnson 7160-0587 Installation guide

Type
Installation guide

This manual is also suitable for

Rev.A
INST-662
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
7160-0587
INSTALLATION INSTRUCTIONS
DESCRIPTION
Revision
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
11783-0005
PS-001
PARTS LIST
TOOLS NEEDED
2
Form
QUANTITY
10004-0002
Phillips Screwdriver
15340
Product
15349
7120-0653
PART NO.
2
2
2
1
INSTALLATION INSTRUCTIONS:
FOR FULL RADIO: Use the hardware that comes with the radio. Discard the hardware
bag that comes with faceplate.
FOR CONTROL HEAD: Use the hardware that comes with the faceplate. Assemble as
shown in figure above. Discard the hardware that comes with radio.
FACEPLATE - MOTOROLA XPR 5550/6550
FULL RADIO AND CONTROL HEAD
FACEPLATE - MOTOROLA XPR 5550/6550
HARDWARE BAG
NYLON SPACER .44 LONG
#10-32 X 1.00 PPHM SCREW
#10 WASHER
#10 WASHERS
SPACERS
#10-32 SCREWS
FACEPLATE
© Copyright 2014 Gamber-Johnson, LLC
  • Page 1 1

Gamber-Johnson 7160-0587 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI