2. American Standard
  3. A8014T-LHO.011

American Standard A8014T-LHO.011 Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard A8014T-LHO.011 Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
L7
© 2021 AS America, Inc.
spec_A8014T-LHO/RHO Elevate60x30-CurvedShwBs 1/21
To Be Specied - Required:
❏ Color: .011 Arctic White
To Be Specied - Optional:
❏ Shower Walls: 2947SWT60.011
❏ Shower Door: AM00838400
Elevate
™
60" x 30"
Curved Shower Base
SEE NEXT PAGE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
A8014T-LHO.011
Elevate 60" x 30" Curved Shower Base
Left Hand Drain
A8014T-RHO.011
Elevate 60" x 30" Curved Shower Base
Right Hand Drain
Elevate
™
60" x 30" Curved Shower Base
❏
A8014T-LHO.011 Elevate 60" x 30" Curved Shower
Base - Left Hand Drain
❏
A8014T-RHO.011 Elevate 60" x 30" Curved Shower
Base - Right Hand Drain
Features:
• Curved design for more space and comfort
• Engineered with premium StruXure
®
material to resist
chipping and peeling
•
Easy to clean, non-porous surface resists mold and mildew
• Preformed DuraComb
™
support base for an easier,
no-mortar install. NOTE: Maximum weight support of
300 lbs. without mortar.
• Features a trench drain with drain cover included
• Single threshold
•
Versatile curved design works for 30"-36" deep alcoves
• Textured, non-slip oor
• Installation clips included for convenience
• Shower drain not included
• 10-Year warranty
Nominal Dimensions:
60" x 30" x 3"
(1524 x 762 x 76 mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASTM E162, ASTM E662, CAN/ULC-S102, ASTM E84
L8
© 2021 AS America, Inc.
spec_A8014T-LHO/RHO Elevate60x30-CurvedShwBs 1/21
NOTES:
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
Elevate
™
60" x 30"
Curved Shower Base
60"
(1524 mm)
57-1/8"
(1452 mm)
1-1/8" (29 mm)
4-1/4"
(108 mm)
34"
(864 mm)
30"
(763 mm)
28-5/8"
(727 mm)
3-1/2" (89 mm)
2-7/8" (74 mm)
1" (25 mm)
14-1/2"
(368 mm)
A8014T-LHO/RHO
Right hand drain outlet shown
/