Buffalo 12TB LinkStation Pro Quad User manual

Category
NAS & storage servers
Type
User manual
LinkStation
User Manual
Buffalo Inc.
www.buffalotech.com
35011114 ver.06
LinkStation User Manual 1
Contents
Chapter 1
Setup............... ......................................................................... 5
LinkNavigator Setup (LS-VL, LS-XHL, LS-CHL) .........................................5
LinkNavigator Setup (LS-WVL, LS-WXL) .....................................................7
LinkNavigator Setup (LS-WSXL) ....................................................................9
LinkNavigator Setup (LS-QVL) .......................................................................12
Diagrams and Layout (LS-VL, LS-XHL, LS-CHL) ........................................14
Diagrams and Layout (LS-WVL, LS-WXL) ...................................................16
Diagrams and Layout (LS-WSXL) ..................................................................18
Diagrams and Layout (LS-QVL) .....................................................................20
Chapter 2
Using your LinkStation ........................................................... 22
Opening the Shared Folder ............................................................................22
Opening the shared folder from another PC ...........................................23
Adding another LinkStations.........................................................................24
Power Modes .......................................................................................................25
Changing the IP Address .................................................................................27
Web Admin interface ........................................................................................28
Adding shared folders ......................................................................................31
Access Restrictions .....................................................................................................33
Disk Quotas ...................................................................................................................43
FTP Server ......................................................................................................................48
Direct Copy ...................................................................................................................51
Users/Groups .......................................................................................................53
Adding Users ................................................................................................................53
LinkStation User Manual 2
Adding Groups ............................................................................................................55
Admin Password .........................................................................................................56
Network .................................................................................................................57
Jumbo Frame................................................................................................................57
Web server .....................................................................................................................59
MySQL server ...............................................................................................................60
System-Settings..................................................................................................61
Name, Date and Time ................................................................................................61
System-Storage ..................................................................................................63
Check Disk .....................................................................................................................63
Format a Drive ..............................................................................................................65
Adding Storage ...........................................................................................................67
Remove Disk .................................................................................................................71
System Backup ....................................................................................................72
Time Machine ...............................................................................................................72
System-Backup ............................................................................................................77
RAID Arrays ..........................................................................................................85
RAID Scanning ....................................................................................................96
System - Maintenance ......................................................................................97
E-mail Notication ......................................................................................................97
System - Power Management .......................................................................99
UPS Settings .................................................................................................................99
Sleep Timer....................................................................................................................100
Restoring Factory Defaults ......................................................................................102
Format the LinkStation .............................................................................................105
Online Update ..............................................................................................................106
Extensions ............................................................................................................107
WebAccess ....................................................................................................................107
Network-USB Server ..................................................................................................108
Print Server ....................................................................................................................110
BitTorrent Client ..........................................................................................................117
DLNA Server..................................................................................................................119
Using iTunes with the Media Server ....................................................................128
LinkStation User Manual 3
Squeezebox Server ....................................................................................................129
Flickr Support ...............................................................................................................130
Eye-Fi connected ........................................................................................................133
Chapter 3
NAS Navigator2 ...................................................................... 135
Chapter 4
Web Admin interface .............................................................. 140
Home ......................................................................................................................140
Shared Folders ....................................................................................................141
Users/Groups .......................................................................................................144
Network .................................................................................................................147
System ...................................................................................................................154
Extensions ............................................................................................................168
Appendix............... .................................................................. 173
Specications ......................................................................................................173
Default Settings ..................................................................................................174
Mapping Additional Shares ...........................................................................175
Windows ........................................................................................................................175
Mac OS X ........................................................................................................................176
Software ................................................................................................................177
Info folder .............................................................................................................180
Status LED (LS-VL, LS-XHL, LS-CHL) .............................................................181
Status LED (LS-WVL, LS-WXL) ........................................................................184
Status LED (LS-WSXL) .......................................................................................188
Status LED (LS-QVL) ..........................................................................................191
LinkStation User Manual 4
Compliance Information .................................................................................196
Troubleshooting .................................................................................................197
Data Backup .........................................................................................................199
GPL Information .................................................................................................199
LinkStation User Manual 5
Chapter 1
Setup
1
Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power
cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or
switch on your network. The Ethernet cable will click and lock in place when inserted properly.
LinkStation
2
Move the Power Mode Switch on the back of the LinkStation to the ON
position.
Note: Do not set the Power Mode Switch to AUTO at this time. After
the initial installation is complete, then the Auto Power Mode
may be used.
3
Wait until the power LED stops blinking and glows a steady blue.
4
Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.
Click [Begin Installation]. The wizard will guide you through installation.
LinkNavigator Setup (LS-VL, LS-XHL, LS-CHL)
If LinkNavigator does not launch automatically, open the
Utility CD and double-click
[LSNavi.exe].
This example shows a LinkStation Pro (LS-VL). Your screen
may be slightly dierent.
Power LED
Network
(Router or Hub)
Chapter1 Setup
LinkStation User Manual 6
Notes: If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.
exe].
If “Do you want to allow the following program to make changes to this computer?” is
displayed in Windows 7, please click [Yes].
If A program needs your permission to continue is displayed in Windows Vista,
please click [Continue].
For OS X, double-click on the LinkNavigator icon in the utility CD.
If you have problems installing, temporarily disable your anti-virus software and
software rewall. After setup is complete, re-enable the software.
If your computer does not have a CD drive, you may download the LinkNavigator
software from www.bualotech.com.
5
Click [Finish] or [Complete]. NAS Navigator2 starts automatically.
6
7
The LinkStations shared folder opens. You can now use the LinkStations shared folder to save
les just like any other folders.
Note: With Mac OS, the LinkStation is mounted as a drive icon on the desktop, or it is displayed in
the sidebar of the Finder.
Setup is now complete.
In NAS Navigator2, double-click your LinkStations icon.
Chapter1 Setup
LinkStation User Manual 7
1
Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power
cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or
switch on your network. The Ethernet cable will click and lock in place when inserted properly.
LinkStation
2
Move the Power Mode Switch on the back of the LinkStation to the ON
position.
Note: Do not set the Power Mode Switch to AUTO at this time. After
the initial installation is complete, then the Auto Power Mode
may be used.
3
Wait until the power LED stops blinking and glows a steady blue.
4
Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.
Click [Begin Installation]. The wizard will guide you through installation.
LinkNavigator Setup (LS-WVL, LS-WXL)
ʳʽʡ
If LinkNavigator does not launch automatically, open the
Utility CD and double-click
[LSNavi.exe].
This example shows a LinkStation Pro Duo (LS-WVL). Your
screen may be slightly dierent.
Power LED
Network
(Router or Hub)
Chapter1 Setup
LinkStation User Manual 8
Notes: If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.
exe].
If “Do you want to allow the following program to make changes to this computer?” is
displayed in Windows 7, please click [Yes].
If A program needs your permission to continue is displayed in Windows Vista,
please click [Continue].
For OS X, double-click on the LinkNavigator icon in the utility CD.
If you have problems installing, temporarily disable your anti-virus software and
software rewall. After setup is complete, re-enable the software.
If your computer does not have a CD drive, you may download the LinkNavigator
software from www.bualotech.com.
5
Click [Finish] or [Complete]. NAS Navigator2 starts automatically.
6
7
The LinkStations shared folder opens. You can now use the LinkStations shared folder to save
les just like any other folders.
Note: With Mac OS, the LinkStation is mounted as a drive icon on the desktop, or it is displayed in
the sidebar of the Finder.
Setup is now complete.
In NAS Navigator2, double-click your LinkStations icon.
Chapter1 Setup
LinkStation User Manual 9
1
Connect the LinkStation with the AC adaptor and an Ethernet cable. Plug the power cord into a
surge protector or power outlet. Connect the Ethernet cable to a router, hub, or switch on your
network. The Ethernet cable will click and lock in place when inserted properly.
LinkStation
2
Move the Power Mode Switch on the back of the LinkStation to ON.
Note: Do not set the Power Mode Switch to AUTO at this time.
After the initial installation is complete, then the Auto
Power Mode may be used.
3
Wait until the power LED stops blinking and glows a steady blue.
LinkNavigator Setup (LS-WSXL)
Power LED
Network
(Router or Hub)
Chapter1 Setup
LinkStation User Manual 10
4
Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.
Click [Begin Installation]. The wizard will guide you through installation.
Notes: If LinkNavigator does not launch automatically, open the Utility CD and double-click
[LSNavi.exe].
If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.
exe].
If “Do you want to allow the following program to make changes to this computer ?” is
displayed in Windows 7, please click [Yes].
If A program needs your permission to continue is displayed in Windows Vista, please
click [Continue].
For Mac OS, double-click on the LinkNavigator icon in the utility CD.
If you have problems installing, temporarily disable your anti-virus software and software
rewall. After setup is complete, re-enable the software.
If your computer does not have a CD drive, you may download the LinkNavigator
software from www.bualotech.com.
5
Click [Finish] or [Complete]. NAS Navigator2 starts automatically.
Chapter1 Setup
LinkStation User Manual 11
6
7
The LinkStations shared folder opens. You can now use the LinkStations shared folder to save
les just like any other folders.
Note: With OS X, the LinkStation is mounted as a drive on the desktop or displayed in the
sidebar of the Finder.
Setup is now complete.
Double-click your LinkStation's icon in the NAS Navigator2
window.
Chapter1 Setup
LinkStation User Manual 12
LinkNavigator Setup (LS-QVL)
1
Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power
cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or
switch on your network. The Ethernet cable will click and lock in place when inserted properly.
2
Hold down the power button on the front of the LinkStation for one
second. The blue Power LED will blink as the LinkStation boots. When
the LinkStation is ready, the LED will stop blinking and glow steadily.
Note:
The power mode switch on the rear should be set to Manual,
not Auto. The Auto position will be usable after initial setup is
complete.
3
Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.
Click [Begin Installation]. The wizard will guide you through installation.
If LinkNavigator does not launch automatically, open the
Utility CD and double-click
[LSNavi.exe].
LinkStation
Network
(Router or Hub)
Power button
Power LED
Chapter1 Setup
LinkStation User Manual 13
Notes: If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.
exe].
If “Do you want to allow the following program to make changes to this computer?” is
displayed in Windows 7, please click [Yes].
If A program needs your permission to continue is displayed in Windows Vista, please
click [Continue].
For OS X, double-click on the LinkNavigator icon in the utility CD.
If you have problems installing, temporarily disable your anti-virus software and
software rewall. After setup is complete, re-enable the software.
If your computer does not have a CD drive, you may download the LinkNavigator
software from www.bualotech.com.
4
Click [Finish] or [Complete]. NAS Navigator2 starts automatically.
5
6
The LinkStations shared folder opens. You can now use the LinkStations shared folder to save
les just like any other folders.
Note: With Mac OS, the LinkStation is mounted as a drive icon on the desktop, or it is displayed in
the sidebar of the Finder.
Setup is now complete.
In NAS Navigator2, double-click your LinkStations icon.
Chapter1 Setup
LinkStation User Manual 14
Diagrams and Layout (LS-VL, LS-XHL, LS-CHL)
1
Power LED
Blue LED: Power on.
LED is OFF: Power o.
Blinks blue:During startup or shutdown.
Amber light is ashing: The amber light ashes if there is a
message. Flashing pattern varies depending
on the message. For more information, refer to
"Status LED" on page 183 .
Red light is ashing: Red light ashes when an error occurs.
Flashing pattern varies depending on the
message. For more information, refer to "Status
LED" on page 181 .
2
Function Button
The Function button initiates direct copy, dismounts USB
devices, and is used to initialize the LinkStation
Front
1
2
Chapter1 Setup
LinkStation User Manual 15
7
8
4
5
6
7
8
3
5
Back
3
Fan
Do not block the fan when installing the unit.
4
USB 2.0 Connector
You may attach a USB device such as a digital camera,
printer, memory card reader, or hard drive. USB hubs, mice,
keyboards, and all-in-one printers are not supported. USB
card readers that support multiple memory cards may not
function properly.
5
Power Mode Switch
AUTO: Automatically powers the LinkStation on and o with
your computer.
ON: Turns the LinkStation on.
OFF: Turns the LinkStation o.
6
LAN Port Connect an Ethernet cable here. The Link/Act
LED by the LAN port turns green when the unit is connected
to the network and ashes when there is network activity.
7
Power Connector Connect the AC adapter here. When it’s
connected properly, the LED to the right will glow green.
8
Hook Use as a strain relief for the AC adapter cable.
Chapter1 Setup
LinkStation User Manual 16
Back
Diagrams and Layout (LS-WVL, LS-WXL)
Front
1
1 Power LED
Blue LED: Power on.
LED is o: Power o.
Blinks blue: During startup or shutdown.
2 Function LED
The Function LED glows blue when direct copy is nished, during initialization, and during
USB dismounting (about 60 seconds). During direct copy it blinks blue.
3 Info/Error LED
The Info/Error LED blinks orange when theres a message and red when theres an error.
4 Function Button
The Function button initiates direct copy, dismounts USB devices, and is used to initialize the
LinkStation.
2
3
4
5
6
7
8
9
10
12
11
Note: – Please do not lift the LinkStation by its front cover. It might come o.
Chapter1 Setup
LinkStation User Manual 17
5 USB 2.0 connector
You may attach a USB device such as a digital camera, printer, memory card reader, or hard
drive. USB hubs, mice, keyboards, and all-in-one printers are not supported. USB card
readers that support multiple memory cards may not function properly.
6 Power Mode Switch
AUTO: The LinkStation turns on and o automatically with your PC (s).
ON: The LinkStation boots and is operational.
OFF: The LinkStation shuts down.
7 LAN Port
Connect to your LAN with an Ethernet cable.
8 Link/Act LED
Glows green for connection.
Blinks green for access.
9 Power connector
The AC adaptor connects here.
10 Fan
Do not block the fan when installing the unit.
11 Security lock for anti-theft
Many security cables are compatible with this lock.
12 Hook
Secure the Power cable so that it does not come o by mistake. Slide the cable down to
secure.
Chapter1 Setup
LinkStation User Manual 18
Back
Diagrams and Layout (LS-WSXL)
Front
1
1 Function Button
The Function Button initiates direct copy, dismounts USB devices, and is used to initialize the
LinkStation.
2 Function LED
The Function LED glows blue when direct copy is nished, during initialization, and during
USB dismounting (about 60 seconds). During direct copy the Function LED blinks blue.
3 Link/Act LED
Glows green for connection.
Blinks green for access.
4 Info/Error LED
The Info/Error LED blinks orange when theres a message and red when theres an error.
2
7
9
8
3
5
4
6
10
11
Chapter1 Setup
LinkStation User Manual 19
5 Power LED (LinkStation)
Blue LED: Power on.
LED is o: Power o.
Blinks blue: During startup or shutdown.
6 Security lock for anti-theft
Many security cables are compatible with this lock.
7 USB 2.0 connector
You may attach a USB device such as a digital camera, printer, memory card reader, or hard
drive. USB hubs, mice, keyboards, and all-in-one printers are not supported. USB card
readers that support multiple memory cards may not function properly.
8 Power Mode Switch
AUTO: The LinkStation turns on and o automatically with your PC(s).
ON: The LinkStation boots and is operational.
OFF: The LinkStation shuts down and turns o.
9 Power connector
The AC adaptor connects here.
10 LAN Port
Connect to your LAN with an Ethernet cable.
11 Hook
Secure the Power cable so that it does not come o by mistake. Slide the cable down to
secure.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200

Buffalo 12TB LinkStation Pro Quad User manual

Category
NAS & storage servers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI