Buffalo 12TB LinkStation Pro Quad User manual

LinkStation

User Manual

Buffalo Inc.

www.buffalotech.com

35011114 ver.06

LinkStation User Manual 1

Contents

Chapter 1

Setup............... ......................................................................... 5

LinkNavigator Setup (LS-VL, LS-XHL, LS-CHL) .........................................5

LinkNavigator Setup (LS-WVL, LS-WXL) .....................................................7

LinkNavigator Setup (LS-WSXL) ....................................................................9

LinkNavigator Setup (LS-QVL) .......................................................................12

Diagrams and Layout (LS-VL, LS-XHL, LS-CHL) ........................................14

Diagrams and Layout (LS-WVL, LS-WXL) ...................................................16

Diagrams and Layout (LS-WSXL) ..................................................................18

Diagrams and Layout (LS-QVL) .....................................................................20

Chapter 2

Using your LinkStation ........................................................... 22

Opening the Shared Folder ............................................................................22

Opening the shared folder from another PC ...........................................23

Adding another LinkStations.........................................................................24

Power Modes .......................................................................................................25

Changing the IP Address .................................................................................27

Web Admin interface ........................................................................................28

Adding shared folders ......................................................................................31

Access Restrictions .....................................................................................................33

Disk Quotas ...................................................................................................................43

FTP Server ......................................................................................................................48

Direct Copy ...................................................................................................................51

Users/Groups .......................................................................................................53

Adding Users ................................................................................................................53

LinkStation User Manual 2

Adding Groups ............................................................................................................55

Admin Password .........................................................................................................56

Network .................................................................................................................57

Jumbo Frame................................................................................................................57

Web server .....................................................................................................................59

MySQL server ...............................................................................................................60

System-Settings..................................................................................................61

Name, Date and Time ................................................................................................61

System-Storage ..................................................................................................63

Check Disk .....................................................................................................................63

Format a Drive ..............................................................................................................65

Adding Storage ...........................................................................................................67

Remove Disk .................................................................................................................71

System Backup ....................................................................................................72

Time Machine ...............................................................................................................72

System-Backup ............................................................................................................77

RAID Arrays ..........................................................................................................85

RAID Scanning ....................................................................................................96

System - Maintenance ......................................................................................97

E-mail Notication ......................................................................................................97

System - Power Management .......................................................................99

UPS Settings .................................................................................................................99

Sleep Timer....................................................................................................................100

Restoring Factory Defaults ......................................................................................102

Format the LinkStation .............................................................................................105

Online Update ..............................................................................................................106

Extensions ............................................................................................................107

WebAccess ....................................................................................................................107

Network-USB Server ..................................................................................................108

Print Server ....................................................................................................................110

BitTorrent Client ..........................................................................................................117

DLNA Server..................................................................................................................119

Using iTunes with the Media Server ....................................................................128

LinkStation User Manual 3

Squeezebox Server ....................................................................................................129

Flickr Support ...............................................................................................................130

Eye-Fi connected ........................................................................................................133

Chapter 3

NAS Navigator2 ...................................................................... 135

Chapter 4

Web Admin interface .............................................................. 140

Home ......................................................................................................................140

Shared Folders ....................................................................................................141

Users/Groups .......................................................................................................144

Network .................................................................................................................147

System ...................................................................................................................154

Extensions ............................................................................................................168

Appendix............... .................................................................. 173

Specications ......................................................................................................173

Default Settings ..................................................................................................174

Mapping Additional Shares ...........................................................................175

Windows ........................................................................................................................175

Mac OS X ........................................................................................................................176

Software ................................................................................................................177

Info folder .............................................................................................................180

Status LED (LS-VL, LS-XHL, LS-CHL) .............................................................181

Status LED (LS-WVL, LS-WXL) ........................................................................184

Status LED (LS-WSXL) .......................................................................................188

Status LED (LS-QVL) ..........................................................................................191

LinkStation User Manual 4

Compliance Information .................................................................................196

Troubleshooting .................................................................................................197

Data Backup .........................................................................................................199

GPL Information .................................................................................................199

LinkStation User Manual 5

Chapter 1

Setup

1

Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power

cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or

switch on your network. The Ethernet cable will “click” and lock in place when inserted properly.

LinkStation

2

Move the Power Mode Switch on the back of the LinkStation to the ON

position.

Note: Do not set the Power Mode Switch to AUTO at this time. After

the initial installation is complete, then the Auto Power Mode

may be used.

3

Wait until the power LED stops blinking and glows a steady blue.

4

Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.

Click [Begin Installation]. The wizard will guide you through installation.

LinkNavigator Setup (LS-VL, LS-XHL, LS-CHL)

If LinkNavigator does not launch automatically, open the

Utility CD and double-click

[LSNavi.exe].

This example shows a LinkStation Pro (LS-VL). Your screen

may be slightly dierent.

Power LED

Network

(Router or Hub)

Chapter1 Setup

LinkStation User Manual 6

Notes: If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.

exe].

If “Do you want to allow the following program to make changes to this computer?” is

displayed in Windows 7, please click [Yes].

If “A program needs your permission to continue” is displayed in Windows Vista,

please click [Continue].

For OS X, double-click on the LinkNavigator icon in the utility CD.

If you have problems installing, temporarily disable your anti-virus software and

software rewall. After setup is complete, re-enable the software.

If your computer does not have a CD drive, you may download the LinkNavigator

software from www.bualotech.com.

5

Click [Finish] or [Complete]. NAS Navigator2 starts automatically.

6

7

The LinkStation’s shared folder opens. You can now use the LinkStation’s shared folder to save

les just like any other folders.

Note: With Mac OS, the LinkStation is mounted as a drive icon on the desktop, or it is displayed in

the sidebar of the Finder.

Setup is now complete.

In NAS Navigator2, double-click your LinkStation’s icon.

Chapter1 Setup

LinkStation User Manual 7

1

Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power

cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or

switch on your network. The Ethernet cable will “click” and lock in place when inserted properly.

LinkStation

2

Move the Power Mode Switch on the back of the LinkStation to the ON

position.

Note: Do not set the Power Mode Switch to AUTO at this time. After

the initial installation is complete, then the Auto Power Mode

may be used.

3

Wait until the power LED stops blinking and glows a steady blue.

4

Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.

Click [Begin Installation]. The wizard will guide you through installation.

LinkNavigator Setup (LS-WVL, LS-WXL)

᫖ໃʳʽʡ

If LinkNavigator does not launch automatically, open the

Utility CD and double-click

[LSNavi.exe].

This example shows a LinkStation Pro Duo (LS-WVL). Your

screen may be slightly dierent.

Power LED

Network

(Router or Hub)

Chapter1 Setup

LinkStation User Manual 8

Notes: If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.

exe].

If “Do you want to allow the following program to make changes to this computer?” is

displayed in Windows 7, please click [Yes].

If “A program needs your permission to continue” is displayed in Windows Vista,

please click [Continue].

For OS X, double-click on the LinkNavigator icon in the utility CD.

If you have problems installing, temporarily disable your anti-virus software and

software rewall. After setup is complete, re-enable the software.

If your computer does not have a CD drive, you may download the LinkNavigator

software from www.bualotech.com.

5

Click [Finish] or [Complete]. NAS Navigator2 starts automatically.

6

7

The LinkStation’s shared folder opens. You can now use the LinkStation’s shared folder to save

les just like any other folders.

Note: With Mac OS, the LinkStation is mounted as a drive icon on the desktop, or it is displayed in

the sidebar of the Finder.

Setup is now complete.

In NAS Navigator2, double-click your LinkStation’s icon.

Chapter1 Setup

LinkStation User Manual 9

1

Connect the LinkStation with the AC adaptor and an Ethernet cable. Plug the power cord into a

surge protector or power outlet. Connect the Ethernet cable to a router, hub, or switch on your

network. The Ethernet cable will “click” and lock in place when inserted properly.

LinkStation

2

Move the Power Mode Switch on the back of the LinkStation to ON.

Note: Do not set the Power Mode Switch to AUTO at this time.

After the initial installation is complete, then the Auto

Power Mode may be used.

3

Wait until the power LED stops blinking and glows a steady blue.

LinkNavigator Setup (LS-WSXL)

Power LED

Network

(Router or Hub)

Chapter1 Setup

LinkStation User Manual 10

4

Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.

Click [Begin Installation]. The wizard will guide you through installation.

Notes: If LinkNavigator does not launch automatically, open the Utility CD and double-click

[LSNavi.exe].

If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.

exe].

If “Do you want to allow the following program to make changes to this computer ?” is

displayed in Windows 7, please click [Yes].

If “A program needs your permission to continue” is displayed in Windows Vista, please

click [Continue].

For Mac OS, double-click on the LinkNavigator icon in the utility CD.

If you have problems installing, temporarily disable your anti-virus software and software

rewall. After setup is complete, re-enable the software.

If your computer does not have a CD drive, you may download the LinkNavigator

software from www.bualotech.com.

5

Click [Finish] or [Complete]. NAS Navigator2 starts automatically.

Chapter1 Setup

LinkStation User Manual 11

6

7

The LinkStation’s shared folder opens. You can now use the LinkStation’s shared folder to save

les just like any other folders.

Note: With OS X, the LinkStation is mounted as a drive on the desktop or displayed in the

sidebar of the Finder.

Setup is now complete.

Double-click your LinkStation's icon in the NAS Navigator2

window.

Chapter1 Setup

LinkStation User Manual 12

LinkNavigator Setup (LS-QVL)

1

Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power

cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or

switch on your network. The Ethernet cable will “click” and lock in place when inserted properly.

2

Hold down the power button on the front of the LinkStation for one

second. The blue Power LED will blink as the LinkStation boots. When

the LinkStation is ready, the LED will stop blinking and glow steadily.

Note:

The power mode switch on the rear should be set to Manual,

not Auto. The Auto position will be usable after initial setup is

complete.

3

Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch.

Click [Begin Installation]. The wizard will guide you through installation.

If LinkNavigator does not launch automatically, open the

Utility CD and double-click

[LSNavi.exe].

LinkStation

Network

(Router or Hub)

Power button

Power LED

Chapter1 Setup

LinkStation User Manual 13

Notes: If you are using Windows 7 or Vista, the autoplay screen may appear. Click [Run LSNavi.

exe].

If “Do you want to allow the following program to make changes to this computer?” is

displayed in Windows 7, please click [Yes].

If “A program needs your permission to continue” is displayed in Windows Vista, please

click [Continue].

For OS X, double-click on the LinkNavigator icon in the utility CD.

If you have problems installing, temporarily disable your anti-virus software and

software rewall. After setup is complete, re-enable the software.

If your computer does not have a CD drive, you may download the LinkNavigator

software from www.bualotech.com.

4

Click [Finish] or [Complete]. NAS Navigator2 starts automatically.

5

6

The LinkStation’s shared folder opens. You can now use the LinkStation’s shared folder to save

les just like any other folders.

Note: With Mac OS, the LinkStation is mounted as a drive icon on the desktop, or it is displayed in

the sidebar of the Finder.

Setup is now complete.

In NAS Navigator2, double-click your LinkStation’s icon.

Chapter1 Setup

LinkStation User Manual 14

Diagrams and Layout (LS-VL, LS-XHL, LS-CHL)

1

Power LED

Blue LED: Power on.

LED is OFF: Power o.

Blinks blue:During startup or shutdown.

Amber light is ashing: The amber light ashes if there is a

message. Flashing pattern varies depending

on the message. For more information, refer to

"Status LED" on page 183 .

Red light is ashing: Red light ashes when an error occurs.

Flashing pattern varies depending on the

message. For more information, refer to "Status

LED" on page 181 .

2

Function Button

The Function button initiates direct copy, dismounts USB

devices, and is used to initialize the LinkStation

Front

1

2

Chapter1 Setup

LinkStation User Manual 15

7

8

4

5

6

7

8

3

5

Back

3

Fan

Do not block the fan when installing the unit.

4

USB 2.0 Connector

You may attach a USB device such as a digital camera,

printer, memory card reader, or hard drive. USB hubs, mice,

keyboards, and all-in-one printers are not supported. USB

card readers that support multiple memory cards may not

function properly.

5

Power Mode Switch

AUTO: Automatically powers the LinkStation on and o with

your computer.

ON: Turns the LinkStation on.

OFF: Turns the LinkStation o.

6

LAN Port Connect an Ethernet cable here. The Link/Act

LED by the LAN port turns green when the unit is connected

to the network and ashes when there is network activity.

7

Power Connector Connect the AC adapter here. When it’s

connected properly, the LED to the right will glow green.

8

Hook Use as a strain relief for the AC adapter cable.

Chapter1 Setup

LinkStation User Manual 16

Back

Diagrams and Layout (LS-WVL, LS-WXL)

Front

1

1 Power LED

Blue LED: Power on.

LED is o: Power o.

Blinks blue: During startup or shutdown.

2 Function LED

The Function LED glows blue when direct copy is nished, during initialization, and during

USB dismounting (about 60 seconds). During direct copy it blinks blue.

3 Info/Error LED

The Info/Error LED blinks orange when there’s a message and red when there’s an error.

4 Function Button

The Function button initiates direct copy, dismounts USB devices, and is used to initialize the

LinkStation.

2

3

4

5

6

7

8

9

10

12

11

Note: – Please do not lift the LinkStation by its front cover. It might come o.

Chapter1 Setup

LinkStation User Manual 17

5 USB 2.0 connector

You may attach a USB device such as a digital camera, printer, memory card reader, or hard

drive. USB hubs, mice, keyboards, and all-in-one printers are not supported. USB card

readers that support multiple memory cards may not function properly.

6 Power Mode Switch

AUTO: The LinkStation turns on and o automatically with your PC (s).

ON: The LinkStation boots and is operational.

OFF: The LinkStation shuts down.

7 LAN Port

Connect to your LAN with an Ethernet cable.

8 Link/Act LED

Glows green for connection.

Blinks green for access.

9 Power connector

The AC adaptor connects here.

10 Fan

Do not block the fan when installing the unit.

11 Security lock for anti-theft

Many security cables are compatible with this lock.

12 Hook

Secure the Power cable so that it does not come o by mistake. Slide the cable down to

secure.

Chapter1 Setup

LinkStation User Manual 18

Back

Diagrams and Layout (LS-WSXL)

Front

1

1 Function Button

The Function Button initiates direct copy, dismounts USB devices, and is used to initialize the

LinkStation.

2 Function LED

The Function LED glows blue when direct copy is nished, during initialization, and during

USB dismounting (about 60 seconds). During direct copy the Function LED blinks blue.

3 Link/Act LED

Glows green for connection.

Blinks green for access.

4 Info/Error LED

The Info/Error LED blinks orange when there’s a message and red when there’s an error.

2

7

9

8

3

5

4

6

10

11

Chapter1 Setup

LinkStation User Manual 19

5 Power LED (LinkStation)

Blue LED: Power on.

LED is o: Power o.

Blinks blue: During startup or shutdown.

6 Security lock for anti-theft

Many security cables are compatible with this lock.

7 USB 2.0 connector

You may attach a USB device such as a digital camera, printer, memory card reader, or hard

drive. USB hubs, mice, keyboards, and all-in-one printers are not supported. USB card

readers that support multiple memory cards may not function properly.

8 Power Mode Switch

AUTO: The LinkStation turns on and o automatically with your PC(s).

ON: The LinkStation boots and is operational.

OFF: The LinkStation shuts down and turns o.

9 Power connector

The AC adaptor connects here.

10 LAN Port

Connect to your LAN with an Ethernet cable.

11 Hook

Secure the Power cable so that it does not come o by mistake. Slide the cable down to

secure.

Page is loading ...

Buffalo 12TB LinkStation Pro Quad User manual

Buffalo 12TB LinkStation Pro Quad User manual

Related papers

Other documents