Kit Instructions/Parts
Shield Kits
406876C
EN
Kit 24A640, For Merkur® Bellows Pumps and Stubby 4-Ball Pumps with
President® Air Motor
Kit 24F251, For 750cc-2000cc 4-Ball Pumps with NXT® Air Motor
Kit 24F252, For 750cc-2000cc 4-Ball Pumps with President, Senator®, and
Bulldog® Air Motors, and Viscount® I+ and Viscount II Hydraulic Motors
Kit 24F253, For 1000cc-2000cc E-Flo® Pumps with Electric Motor
Kit 24F254, For 3000cc and 4000cc 4-Ball Pumps with NXT Air Motor
Kit 24F255, For 3000cc and 4000cc 4-Ball Pumps with Viscount II Hydraulic Motor
Important Safety Instructions
Read all warnings and instructions in this manual and
in your 4-Ball pump manual. Save all instructions.
ti15757a
ti15758a
ti15759a
Assembly
Step 2
Disassembly
ti15770a
Step 1
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 406876
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA
Copyright 2010, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revised 09/2011
/