2. ADDER
  3. RMK15
RMK15

ADDER RMK15 User guide

  • Hello! I've reviewed the Quick Start guide for the Adder RMK15 Rack Mount. This document provides instructions on mounting compatible modules and power adapters and securing them using brackets and bolts. I can answer your questions about the installation process and features described in this document.
  • How do I place a module into the rack mount?
    What holds the modules in place?
    How do I install the rack mount into a rack?
ADDERLink
™
XD
641
PWR
LINK
LINK
AB
STS VID LNK
T X
TRANSMIT
ADDERLink
™
XD
641
PWR
LINK
LINK
AB
STS VID LNK
T X
TRANSMIT
Rack Mount: RMK15
Quick Start
© 2021 Adder Technology Limited • All trademarks are acknowledged.
Part No. MAN-QS-000052_V1.1
www.adder.com
Using the RMK15 Adder rack mount
1 Place a compatible module into each side of the rack mount so that their rear panels
butt up against the center backstop.
2 Locate the two supplied brackets.
3 Place a bracket at side of the rack mount so that they hold each unit in place (A).
4 Install the rack mount into your 19” rack frame and fully secure it using four bolts (B).
5 Place the power adapters in the rear section of the rack mount and connect
them to their respective modules.
6 Make all other necessary connections to the modules.
ADDERLink
™
XD
641
LINK
A
(A) (B)
ADDERLink
™
XD
641
LINK
A
/