2. Kohler
  3. K-8334
K-8334

Kohler K-8334 User manual

  • Hello! I've reviewed the provided document detailing the KOHLER bath K-8334. This document outlines the features, installation details and materials of this freestanding bath, including its deep soaking design and lumbar support. I'm ready to answer any questions you may have about it.
  • What is the material of the bath?
    What is the installation type for this bath?
    What is the depth of the bath?
Imperator®
65-3/4" x 31" freestanding bath
K-8334
Features
•Freestanding design creates a striking focal point in your
bathing area.
•17" (432 mm) depth offers a deep soaking experience.
•Integral lumbar support.
•Slotted overflow allows for deep soaking.
•Center toe-tap drain with KOHLER Lithocast® cover.
Material
•KOHLER Lithocast® Gloss cast resin.
Installation
•Freestanding.
Recommended Products/Accessories
K-23726 Drain treatment
K-23732 Tub & shower cleaner
Codes/Standards
CSA B45.5/IAPMO Z124
KOHLER® Plastic Baths and Shower
Bases Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-5-2021 04:34 - US/CA/MX
Imperator®
65-3/4" x 31" freestanding bath
K-8334
30-15/16"
(786 mm)
Lumbar
Angle 22°30-3/4" (781 mm)
23-3/4"
(603 mm)
14-1/2"
(368 mm)
29" (737 mm) 1-1/2" Bath Drain
65-3/4" (1670 mm)
32-7/8" (835 mm)
65-1/16" (1653 mm)
Lumbar
Angle 22°
15-5/16"
(389 mm)
18-11/16"
(475 mm)
2-5/8"
(67 mm)
2-7/16"
(62 mm)
Technical Information
All product dimensions are nominal.
Installation: Freestanding
Drain location: Center
Basin area, bottom: 50-1/8" x 22-3/8" (1273 mm x 568 mm)
Basin area, top: 64-1/2" x 29-5/8" (1639 mm x 753 mm)
Weight: 360 lbs (163.3 kg)
Minimum floor load: 90.9 lbs/ft² (443.8 kg/m²)
Water depth: 16-15/16" (430 mm)
Water capacity: 94.61 gal (358.1 L)
Template: Footprint, 1314995, not required, not
included
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Allow for 3” (76 mm) diameter of clearance
around the drain pipe on finished floor material
to prevent drain body interference during
installation.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-5-2021 04:34 - US/CA/MX
/