2. Kohler
  3. K-8336
K-8336

Kohler K-8336 User manual

  • Hello! I have reviewed the datasheet for the KOHLER Ceric K-8336 bath. This document details the features of this freestanding bath, including its 17" depth, integrated lumbar support, and unique overflow design. I'm ready to answer any questions you might have about its material, installation, or other characteristics described in the document.
  • What material is the bath made of?
    What is the depth of the bath?
    What type of installation is required?
Ceric®
65" x 31" freestanding bath
K-8336
Features
•Freestanding design creates a striking focal point in your
bathing area.
•17" (432 mm) depth offers a deep soaking experience.
•Integral lumbar support.
•Slotted overflow allows for deep soaking.
•Center toe-tap drain with KOHLER Lithocast® cover.
Material
•KOHLER Lithocast® Gloss cast resin.
Installation
•Freestanding.
Recommended Products/Accessories
K-23726 Drain treatment
K-23732 Tub & shower cleaner
Codes/Standards
CSA B45.5/IAPMO Z124
KOHLER® Plastic Baths and Shower
Bases Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-5-2021 04:34 - US/CA/MX
Ceric®
65" x 31" freestanding bath
K-8336
15-9/16"
(395 mm)
Lumbar
Angle 20°29-1/16"
(738 mm)
22-7/8"
(581 mm)
10-1/2"
(267 mm)
21" (533 mm)
1-1/2"
Bath Drain
65" (1651 mm)
32-1/2" (826 mm)
2-5/8"
(67 mm)
2-1/2""
(64 mm)
2-1/4"
(57 mm)
55" (1397 mm)
Lumbar
Angle 20°
31-1/8"
(791 mm)
17-15/16"
(456 mm)
Technical Information
All product dimensions are nominal.
Installation: Freestanding
Drain location: Center
Basin area, bottom: 48-5/16" x 24-5/16" (1228 mm x
618 mm)
Basin area, top: 61-3/16" x 27-7/16" (1554 mm x
696 mm)
Weight: 320 lbs (145.1 kg)
Minimum floor load: 133.5 lbs/ft² (651.8 kg/m²)
Water depth: 17-1/8" (435 mm)
Water capacity: 90 gal (340.7 L)
Template: Footprint, 1314997, not required, not
included
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Allow for 3” (76 mm) diameter of clearance
around the drain pipe on finished floor material
to prevent drain body interference during
installation.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-5-2021 04:34 - US/CA/MX
/