Amico 3-23-000607 Installation guide

Brand: Amico

Model: 3-23-000607

Type: Installation guide

Amico 3-23-000607 is a wall-mounted RGB touch controller that provides intuitive control over lighting systems. Designed for MRI compatibility, it ensures safe and reliable operation in healthcare environments. The controller features a sleek and modern design, blending seamlessly into various architectural styles. With its touch-sensitive interface, users can effortlessly adjust lighting color, brightness, and ambiance to create the desired atmosphere.

Installation Guide

MRI Compatible

Important Safety Instructions

When using electrical equipment, basic safety precautions should always

be followed including the following:

Read And Follow All Safety Instructions

RGB Wall Mounted Touch Controller

3-23-000607

Installation:

Diagram 1

Save These Instructions For Future Reference

1. Warning: This product must be installed in accordance with the NEC or your

local electrical code. If you are not familiar with these codes and require-

ments, consult a qualied electrician. Aenon: Ce produit doit être installé

conformément au NEC ou à votre code électrique local. Si vous n’êtes pas fami-

lier avec ces codes et exigences, consultez un électricien qualié.

2. Warning: This equipment is not for use in hazardous combusble atmospheres

as dened by the Naonal Electrical Code. Averssement: Cet équipement ne

doit pas être ulisé dans des atmosphères combusbles dangereuses telles que

dénies par le Naonal Electrical Code.

3. Danger: Risk of shock - Disconnect power before installaon. Danger: Risque

de choc – Couper l’alimentaon avant l’installaon.

METRIC-MILLIMETER

TOLERANCES

UNLESS OTHERWISE

SPECIFIED

X ± 0.8

X.X ± 0..25

X.XX ± 0.13

X.XXX ± 0.013

ANGLES ±1/2°

DRAWING NO.

SCALE

JOB NUMBER

DESCRIPTION

DRAWN BY

CHECKED BY

DRAWN DATE

CHECKED DATE

REVISION DATE

REVISION DESCRIPTION

ECN

SHEET

This document and the information contained therein are the property of PDC FACILITIES, INC. Hartland, Wisconsin.

Recipient agrees NOT to:

(1) Use such information for purposes other than those expressly authorized by PDC FACILITIES, INC. (2) Furnish such information to any other person

in whole or in part for any purpose whatsoever without the express written permission of PDC FACILITIES, INC.

(3) Reproduce or copy this document either in whole or in part without the express written permission of PDC FACILITIES, INC.

FACILITIES, INC.

700 WALNUT RIDGE DRIVE

HARTLAND, WI 53029

PHONE: (262) 367-7700

FAX: (262) 367-7944

REVISION

1:2

3-23-000607

PP-ELE VAYA TOUCH CONTROLLER

INCH

TOLERANCES

UNLESS OTHERWISE

SPECIFIED

X.X ± 0.03

X.XX ± 0.015

X.XXX ± 0.005

X.XXXX ± 0.0005

ANGLES ±1/2°

DRAWING NO.

SCALE

JOB NUMBER

DESCRIPTION

DRAWN BY CHECKED BY

DRAWN DATE

CHECKED DATE

REVISION DATE

REVISION DESCRIPTION

ECN

SHEET

This document and the information contained therein are the property of PDC FACILITIES, INC. Hartland, Wisconsin.

Recipient agrees NOT to:

(1) Use such information for purposes other than those expressly authorized by PDC FACILITIES, INC. (2) Furnish such information to any other person

in whole or in part for any purpose whatsoever without the express written permission of PDC FACILITIES, INC.

(3) Reproduce or copy this document either in whole or in part without the express written permission of PDC FACILITIES, INC.

FACILITIES, INC.

700 WALNUT RIDGE DRIVE

HARTLAND, WI 53029

PHONE: (262) 367-7700

FAX: (262) 367-7944

REVISION

1:4

3-23-000607 STEP 2

PP-ELE VAYA TOUCH CONTROLLER

Diagram 2

Diagram 4 Diagram 3

Step 1:

Turn off the main power supply.

Step 2:

Remove the faceplate by removing the two

screws as shown in Diagram 1.

Step 3:

Attach the backplate to the installed junction

box as shown in Diagram 2.

Step 4:

Connect the plug as shown in Diagram 3.

Step 5:

Attach the faceplate as shown in Diagram 4.

Step 6:

Complete the electrical connections as shown

in the Electrical Connections Section.

Directive 2012/19/EU (WEEE - Waste Electrical and Electronic Equipment): Information for Users

This product complies with EU Directive 2012/19/EU. The crossed out wheeled bin symbol on the article means that at the end of its useful lifespan, this product must not be disposed

of with your other household or municipal waste. This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that

could impact health and the environment if not properly disposed. In order to avoid dissemination of those substances in our environment and to diminish the pressure on the natural

resources, the user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. The separate collection and recycling of your waste

equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information

on available collection facilities contact your local waste collection service or the place of purchase.

Amico Lights Corporation | 122-B East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada | www.amico.com

Toll Free Tel: 1.877.462.6426 | Toll Free Fax:1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862

For informational purposes only. Content is subject to change.

ALT-INSTALL-MRI-TOUCH-CONTROLLER-RGB 01.18.2021

Back of Touch Controller

Removable back of

Touch Controller

12V+

DMX+

DMX-

GND