edishine HGSL10A User manual

Type
User manual

The edishine HGSL10A LED Spot Light is a versatile and energy-efficient outdoor lighting solution. With its adjustable brightness, easy installation, and durable construction, it's perfect for illuminating pathways, gardens, and other outdoor areas. Choose between high light (552lm) or low light (398lm) to create the perfect ambiance for your outdoor space. Installation is simple: prepare a hole, push in the ground stake, and plug it in. The lamp body can rotate up to 90 degrees for precise light positioning.

The edishine HGSL10A LED Spot Light is a versatile and energy-efficient outdoor lighting solution. With its adjustable brightness, easy installation, and durable construction, it's perfect for illuminating pathways, gardens, and other outdoor areas. Choose between high light (552lm) or low light (398lm) to create the perfect ambiance for your outdoor space. Installation is simple: prepare a hole, push in the ground stake, and plug it in. The lamp body can rotate up to 90 degrees for precise light positioning.

[Instruction Manual]
SKU:HGSL10A
LED Spot Light
Thank you for your purchase.
Please contact us if you have any questions.
We will get back to you within 24 hours.
Please attach your Order ID so that
we can serve you better.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Lamp Body x 1
Switch x 1
Ground Stake x 1
Extension Cord x 5ft
FCC Warning :
Product Layout
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
01
A
B
C
D
Installation
WARNING: Never push the fixture into the ground by the lamp
body (A) or use a hammer to insert the ground stake
(C) into the ground.
1.Installing the light
2.Connecting the power
• Prepare a hole in the installation location. Use a tool such as a screwdriver
(sold separately) to prepare the installation hole to ensure the hole is not
larger than the ground stake (C).
• Install the fixture in the ground by pushing on the foot step (1) on the
ground stake (C). Do not push on the lamp body (A).
• The lamp body (A) can rotate up and down 90 degrees.
• After the fixture is installed, insert the plug (D) into an outlet
!
02
3.Adjusting the illumination, brightness output of the light
• Choose your preferred lumen output from two options: High light or Low
light.
• The light cycles from High light (552lm) → OFF → Low light (398lm)
OFF → High light (552lm) → OFF → Low light (398lm) , etc.
• Push the switch (B) to cycle through the above selections.
B
03
Troubleshooting
Care and Cleaning
Problem
The fixture will
not light There is no power
Ensure the Plugged into the GFCI
wall outlet
Ensure that a bresker or GFCI
circuit has not been tripped
Prossible Cause Solution
• Clean the fixture with a soft dry cloth.
• Do not use any cleaners with chemicals, solvents or harsh abrasives.
Specifications
- Input Voltage 120VAC 60Hz
- Power Rating: 5.15W (398lm)
7.84W (552lm)
- Luminance: 398lm (5.15W)
552lm (7.84W)
- Color Temperature 3000K
- Life span: 50000 hours
- CRI: 80+
- Warranty: 1 years
04
EDISHINE warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase. Warranty
is void if damage is caused by misuse or improper installation.
Our dedicated customer service team will get back to you within 24 hours.
One Year Limited Warranty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

edishine HGSL10A User manual

Type
User manual

The edishine HGSL10A LED Spot Light is a versatile and energy-efficient outdoor lighting solution. With its adjustable brightness, easy installation, and durable construction, it's perfect for illuminating pathways, gardens, and other outdoor areas. Choose between high light (552lm) or low light (398lm) to create the perfect ambiance for your outdoor space. Installation is simple: prepare a hole, push in the ground stake, and plug it in. The lamp body can rotate up to 90 degrees for precise light positioning.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI