2. V TAC
  3. V-TAC 8567 Underground Lamp
V-TAC 8567 Underground Lamp

V TAC V-TAC 8567 Underground Lamp, V-TAC 80133970 Underground Lamp, V-TAC 8566 Underground Lamp, V-TAC VT-7678-3 Ground Spot Bubik, V-TAC VT-7678-3 Underground Fitting Three Window Walkable User manual

  • Hello! I've reviewed the installation instructions for the V-TAC Underground Lamps, specifically models VT-7678-3, VT-7678-1, and VT-7678-2. This document includes details on its IP67 rating, the use of MR16 bulbs, and a 2-year warranty. I'm ready to answer your questions about these lamps.
  • What type of bulb does the lamp use?
    Is the light source replaceable?
    What is the warranty period for the product?
INSTALLATION INSTRUCTION
WEEE Number: 80133970
2
YEAR
WARRANTY
*
UNDERGROUND LAMP
INTRODUCTION & WARRANTY
TECHNICAL DATA
Thank you for selec�ng and buying V-TAC Product. V-TAC will serve you the best. Please read
these instruc�ons carefully before star�ng the installing and keep this manual handy for future
reference. If you have any another query, please contact our dealer or local vendor from whom
you have purchased the product. They are trained and ready to serve you at the best. The
warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage
caused by incorrect installa�on or abnormal wear and tear. The company gives no warranty
against damage to any surface due to incorrect removal and installa�on of the product. The
products are suitable for 10-12 Hours Daily opera�on. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects only.
8566
8567 8568
Model Base Input Power IP Ra�ng Dimension Rated Load
VT-7678-3 MR16 (Bulb not included) AC/DC:12V IP67 D:87x128mm Max 20w
VT-7678-1 MR16 (Bulb not included) AC/DC:12V IP67 D:87x128mm Max 20w
VT-7678-2 MR16 (Bulb not included) AC/DC:12V IP67 D:87x128mm Max 20w
INSTALLATION DIAGRAM
WARNING!
1. Please make sure to turn off the power before star�ng the installa�on.
2. The light source of this luminaire is not replaceable, when the light source reaches its end of
life the whole luminaire should be replaced.
3. Install only by cer�fied Electrician.
Cau�on, risk of electric shock.
This marking indicates that this product
should not be disposed of with other
household wastes.
1. Open the lamp and install the bulb in the lamp
2. Connect the supply leads with terminal (The box not included).
3. Fix the lamp body on the ground.
4. Switch on and test.
In case of any query/issue with the product please reach out to us at [email protected]
V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
/