Storing Changes in a Preset
¡¢¢£¢¢
Recalling a Preset
¤
Recalling a Preset with INC/+ or DEC/– switch
With INC/DEC switches
Selecting Delay Units
BPM Analyzer Function
¤
¥
Adjusting Delay Tempo (1)
With TAP-PLAY/hold(PS SEL > PS1/PS2) switch
Adjusting Delay Tempo (2) - Tap Function
Adjusting Delay Tempo (3) - MIDI clock
Setting Delay Length as Note Duration (Subdivision)
¦
¦
§¡£¡£
¡£
¨¡£¨
¡¦£
©
©
ª
¥
¤¤
¤
Rec & Repeat Function
¡£
ª
§
«
¬
¤¦
®®
§
¬
Recalling a Preset with TAP-PLAY/hold(PS SEL > PS1/PS2) switch
Recalling Preset 1 * Only when the TAP-PLAY/hold(PS SEL > PS1/PS2)
switch is used for the Tap function.
Toggling between Presets 1 and 2 * Only when the TAP-PLAY/hold
(PS SEL > PS1/PS2) switch is used for the Tap function.
¯
NOTE
¨
¬
Rec & Repeat Flowchart
Connect an unlatch (momentary) type footswitch
to the HOLD(REC) terminal on the rear panel.
HOLD (REC)
switch
HOLD (REC)
switch
TAP-PLAY
switch
ON/OFF-STOP
switch
HOLD (REC)
switch
HOLD (REC)
switch
ON/OFF-STOP
switch
Press & hold down the
HOLD (REC) switch for
three seconds to put
the machine in Record
Standby mode.
[REC] flashes.
Press the HOLD (REC)
switch to start recording.
[REC] illuminates steadily.
Press the TAP-PLAY
switch to stop recording
and start playback.
[PLAY] illuminates.
Press the ON/OFF-STOP
switch to stop recording.
[STOP] illuminates.
Press the HOLD (REC)
switch to start recording.
[REC] illuminates.
Press the ON/OFF-STOP
switch to stop playback.
[STOP] illuminates.
Press & hold down
the HOLD (REC)
switch for three
seconds to exit from
Rec & Repeat mode
to usual mode.