2. Active Ventilation
  3. VPC-4
VPC-4

Active Ventilation VPC-4, VPC-4-BL, VPC-4-BR, VPC-4-GR, VPC-4-WD, VPC-4-WT User manual

  • I have reviewed the installation instructions for the Vent Pipe Cap VPC-4. This document details how to install the vent cap, which is designed to fit over a 4" pipe secured with three self-tapping screws and is made of aluminum. The instructions also specify the recommended screw size. I'm ready to answer any questions you might have about this product.
  • What size pipe does this vent cap fit?
    How many screws are needed to install the vent cap?
    What type of screws are recommended for installation?
    Are screws included?
2 1/4"
[5.76 cm]
4 1/8"
[10.48 cm]
4 1/4"
[10.48 cm]
1 1/4"
[2.90 cm]
7 1/4"
[18.42 cm]
Flashing Detail & Instructions
Exhaust Pipe
FastenerFastener
Active Ventilation Products, Inc.
Website: roofvents.com Email: [email protected]
Installation Instructions
Vent Pipe Cap Model: VPC-4 Diameter: 4"
3/24/2022
1. Slide the Vent Pipe Cap over the existing pipe.
2. Observe the screws located on top of the vent. Use this
as a pattern to attach the vent to the pipe.
3. To secure the vent, attach the vent to the pipe using a
#8 self-tapping sheet metal screw.
4. Total number of screws needed = 3
5. Recommended installation screw:
#8 x 1/2" Sheet Metal Screw
6. Screws not included.
* All Aluminum Construction, Thickness = 0.025" [0.635 mm]
/