Active VPC-4-WT User manual

2 1/4"

[5.76 cm]

4 1/8"

[10.48 cm]

4 1/4"

[10.48 cm]

1 1/4"

[2.90 cm]

7 1/4"

[18.42 cm]

Flashing Detail & Instructions

Exhaust Pipe

FastenerFastener

Active Ventilation Products, Inc.

Website: roofvents.com Email: [email protected]

Installation Instructions

Vent Pipe Cap Model: VPC-4 Diameter: 4"

3/24/2022

1. Slide the Vent Pipe Cap over the existing pipe.

2. Observe the screws located on top of the vent. Use this

as a pattern to attach the vent to the pipe.

3. To secure the vent, attach the vent to the pipe using a

#8 self-tapping sheet metal screw.

4. Total number of screws needed = 3

5. Recommended installation screw:

#8 x 1/2" Sheet Metal Screw

6. Screws not included.

* All Aluminum Construction, Thickness = 0.025" [0.635 mm]

This manual is also suitable for

Download PDF