2. imou
  3. IPC-B46LN
IPC-B46LN

imou IPC-B46LN User guide

  • Hello, I've reviewed the user guide for the Imou Cell 2 camera. This document provides comprehensive instructions on how to set up your new device, including downloading the app, configuring the camera, and connecting to your Wi-Fi network. I'm ready to assist you with any specific questions you might have regarding the product.
  • How do I download the app?
    How do I add the camera to my account?
    What should I do if it fails to connect to DAP hotspot?
Quick Start Guide-Imou Cell 2
1. Download the Imou Life App
Option 1: Search “Imoulife” App from the App Store or Google Play
Option 2: Scan the QR code on the below picture to install Imou Life App
•For iOS, the system version should be 9.0 or above.
•For Android, the system version should be 5.0 or above.
2. Create an ImouLife account
2.1 Click “sign up”
2.2 Select the region where you are from
2.3 Enter your email address and set a password
2.4 Enter the verification code found in the email sent
from Imou
*Kindly be noted that the email verification code might
get blocked. If you didn’t receive it, please check your
trash box.
3. Add the camera into your Imou account
Option 1: Scan the QR code located on the
back of the camera
Option 2: Add the camera manually by
inputting the serial number
*Warm notes:
•Please place your smartphone, camera
within 30 cm of the router.
•Please keep your smartphone 10-15 cm
from the camera when scanning the QR
code
4. Remove the cover and insert the battery
4.1 Twist to remove the cover from the
bottom of the camera.
4.2 Ensure that the arrow on the battery
faces up. Insert the battery into the right
place, and you will hear a click sound.
5. Power on the camera
5. 1 Press the reset button for 2-3 seconds and
ensure that the LED turns green.
5.2 Wait until the LED flashes green and then
tap next
5.3 Align the cover to the entrance
5.4 Push and then twist it into the lock position
6. Connect to the device DAP hotspot
6.1 Connect your mobile phone to the device DAP
hotspot
6.2 Once connected, select your home Wi-Fi network
on the next page.
What if you fail to connect to DAP hotspot?
Go to the WLAN setting of your mobile phone, and
then connect to the device DAP hotspot manually.
The password is a 8-bit safety code located on the
back of the camera. Once connected, return to this
page.
*Kindly be noted DAP hotspot does not have internet
connection. It is just a necessary step for device
configuration.
7. Connect to Imou cloud server
7.1 Enter your home Wi-Fi password correctly and tap “next”, then the camera will connect to Imou cloud server automatically.
/