GS324v2

Netgear GS324v2 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Netgear GS324v2 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
24-Port Gigabit Ethernet Unmanaged Switch
GS324v2
• NETGEAR24-PortGigabitEthernetUnmanagedSwitchModelGS324v2
• Powercord(variesbyregion)
• Rack-mountbracketsandscrews
• Wall-mountscrews
• Rubberfootpads
• Installationguide
Package contents
Step 2. Connect the equipment. Step 4. Check the status.
January2022
Step 3. Connect to power.
Power LED Port Link and Activity LED
(onenumberedLEDforeachport)
Port Speed LED
(onesquareLEDforeachport)
Poweredon
(solidgreen)
Link
(solidgreen)
1000Mbpslink
(solidgreen)
Poweredoff
(off)
Activity
(blinkinggreen)
100/10Mbpslink
(solidyellow)
Nolink
(off)
Thisswitchisdesignedforindooruseonly.Ifyouwanttoconnectittoadevicelocated
outdoors,theoutdoordevicemustbeproperlygroundedandsurgeprotected,andyou
mustinstallanEthernetsurgeprotectorinlinebetweentheswitchandtheoutdoordevice.
Failuretodosocandamagetheswitch.
WARNING: Beforeconnectingthisswitchtooutdoorcablesordevices,see
https://kb.netgear.com/000057103forsafetyandwarrantyinformation.
1. FromacomputerormobiledevicethatisconnectedtotheInternet,visit
my.netgear.com.
2. LogintoyourNETGEARaccount.
NOTE: Ifyoudon’thaveafreeNETGEARaccount,youcancreateone.
TheMyProductspagedisplays.
3. Fromthemenuontheleft,selectRegister a Product.
4. IntheSerial Numbereld,typetheserialnumberofyourswitch.
Theserialnumberis13digitslong.Itisprintedontheswitchlabel.
5. FromtheDate of Purchasemenu,selectthedatethatyoupurchasedtheswitch.
6. ClicktheREGISTERbutton.
YourswitchisregisteredtoyourNETGEARaccount.
AconrmationemailissenttoyourNETGEARaccountemailaddress.
Step 1. Register the switch.
GS324v2switch
Desktop
Sample connections
Laptop
ReadyNAS SmartTV
Desktop
Gamingconsole
Router
Internet
IPcamera
Installation Guide
©NETGEAR,Inc.,NETGEARandthe
NETGEARLogoaretrademarksof
NETGEAR,Inc.Anynon-NETGEAR
trademarksareusedforreference
purposesonly.
NETGEAR, Inc.
350EastPlumeriaDrive
SanJose,CA95134,USA
NETGEAR INTERNATIONAL LTD
Floor1,Building3
UniversityTechnologyCentre
CurraheenRoad,Cork,
T12EF21,Ireland
Support and Community
Regulatory and Legal
SiceproduitestvenduauCanada,vouspouvezaccéderàcedocumentenfrançais
canadienàhttps://www.netgear.com/support/download/.
(IfthisproductissoldinCanada,youcanaccessthisdocumentinCanadianFrenchat
https://www.netgear.com/support/download/.)
ForregulatorycomplianceinformationincludingtheEUDeclarationofConformity,visit
https://www.netgear.com/about/regulatory/.
Seetheregulatorycompliancedocumentbeforeconnectingthepowersupply.
ForNETGEAR’sPrivacyPolicy,visithttps://www.netgear.com/about/privacy-policy/.
Byusingthisdevice,youareagreeingtoNETGEAR’sTermsandConditionsat
https://www.netgear.com/about/terms-and-conditions/.Ifyoudonotagree,returnthe
devicetoyourplaceofpurchasewithinyourreturnperiod.
Donotusethisdeviceoutdoors.
Visitnetgear.com/supporttogetyourquestionsansweredandaccessthelatest
downloads.
YoucanalsocheckoutourNETGEARCommunityforhelpfuladviceat
community.netgear.com.
Specication Description
Networkinterface RJ-45connectorfor1000BASE-T,100BASE-T,or10BASE-T
Networkcable Category5e(Cat5e)orhigherratedEthernetcable
Ports 24
Power 100-240VAC50/60Hz,0.7A
Powerconsumption 12Wmax.
Weight 2.67lb.(1.21kg)
Dimensions(WxDxH) 9.92x7.09x1.73in(252x180x44mm)
Operatingtemperature 32–122°F(0–50°C)
Operatinghumidity 10%–90%relativehumidity,noncondensing
SpecicationsAttach the switch to a wall
Toattachtheswitchtoawall,youneedthewall-mountscrewsthataresuppliedwiththe
switch.Thesescrewsare6.3mmindiameter,27mminlength.
To attach the switch to a wall:
1. Locatethetwomountholesonthebottompaneloftheswitch.
2. Markanddrilltwomountingholesinthewallwhereyouwanttomounttheswitch.
Youcanmounttheswitchhorizontallyorvertically:
• Horizontally:Thetwomountingholesmustbeataprecisedistanceof7.0in.
(178mm)fromeachother.
• Vertically:Thetwomountingholesmustbeataprecisedistanceof3.5in.
(89mm)fromeachother.
3. InsertthesuppliedanchorsintothewallandtightenthesuppliedscrewswithaNo.2
Phillipsscrewdriver.
Leaveabout0.15in.(4mm)ofeachscrewprotrudingfromthewallsothatyoucan
insertthescrewsintotheholesonthebottompanel.
Install the switch in a rack
Toinstalltheswitchinarack,youneedtherack-mountbracketsandscrewsthatare
suppliedwiththeswitch.
To install the switch in a rack:
1. Attachthesuppliedmountingbracketstothesideoftheswitch.
Insertthescrewsprovidedintheproductpackagethrougheachbracketandintothe
bracketmountingholesintheswitch.
2. TightenthescrewswithaNo.2Phillipsscrewdrivertosecureeachbracket.
3. Alignthemountingholesinthebracketswiththeholesintherack,andinserttwopan-
headscrewswithnylonwashersthrougheachbracketandintotherack.
4. TightenthescrewswithaNo.2Phillipsscrewdrivertosecuremountingbracketstothe
rack.
/