VENTURE LIGHTING AE0004 is a high-quality LED retrofit lamp designed to replace traditional HPS/HID and self-ballasted CFL lamps in enclosed fixtures. With its long-lasting performance and energy-saving capabilities, it is an excellent choice for both commercial and industrial applications. It operates on 100V-277V input voltage and offers a simple installation process, making it suitable for use in various lighting fixtures. It also features a passive heat sink for efficient heat dissipation, ensuring optimal performance and extending its lifespan.
VENTURE LIGHTING AE0004 is a high-quality LED retrofit lamp designed to replace traditional HPS/HID and self-ballasted CFL lamps in enclosed fixtures. With its long-lasting performance and energy-saving capabilities, it is an excellent choice for both commercial and industrial applications. It operates on 100V-277V input voltage and offers a simple installation process, making it suitable for use in various lighting fixtures. It also features a passive heat sink for efficient heat dissipation, ensuring optimal performance and extending its lifespan.
(800) 451-2606 VentureLighting.com
V
ENT U R E E T ROFI T
Read These Instructions Completely and Carefully
Before You Begin
LIGHTING’ S L E D L A M P
R
WARNING
Risk of electric shock
• Disconnect power from the luminaire and follow proper lockout/tagout procedures
before beginning installation or maintenance. Contact a qualified electrician for
installation.
• Venture Lighting LED Retrofit lamp installation requires knowledge of luminaire
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
• Venture Lighting LED Retrofit lamps require 100V-277V input voltage. The installer is responsible to determine whether the
proper voltage is run to the luminaire being serviced.
• Venture Lighting LED Retrofit lamps operate on line voltage and require all ballasts, capacitors and starters to be bypassed
and/or removed.
• Suitable for use in dry or damp locations only. Do not use where directly exposed to liquid, vapor, rain or weather.
• This device is not intended for use with emergency exits.
• This device is not intended for use with dimmers.
• The device is suitable for enclosed fixtures, however ensure that there is adequate space around the device for heat dissipation.
• The device uses a passive heat sink for heat dissipation. Do not block or cover the lamp as it will adversely affect the lamp
performance and lamp life.
• The modified fixture can no longer operate as was originally intended.
Upgrade Instructions
STEP 1: Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or
maintenance.
STEP 2: Remove the existing lamp. Dispose of the lamps per local requirements.
STEP 3: Disconnect and remove the existing ballast, capacitor and ignitor. Dispose of the components per local requirements.
STEP 4: Connect the Line Live wire (Line/Hot) to the center contact (eyelet) of the lamp holder.
STEP 5: Connect Line Neutral wire (Common) to the shell of the lamp holder.
STEP 6: Insert and screw in the LED retrofit lamp into the lamp holder.
STEP 7: Close the wiring compartment. Watch to be sure the wires are not pinched, bound or crimped when closing the
compartment.
STEP 8: Attach the Lamping Replacement Label which is provided with the retrofit lamp to the fixture so it shall be visible during
relamping.
STEP 9: Switch on the power.
USER MANUAL
STOP
© 2022 Venture Lighting International • Venture Lighting is a registered trademarks of Venture Lighting International.
(800) 451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail: [email protected]
VentureLighting.com
AE0004-B
L
N
Replacing Self Ballasted CFL Lamp
Replacing
with
L
N
Self ballasted
CFL Lamp LED Retrofit
Lamp
HPS / HID
Lamp
Ballast
Ignitor
Capacitor
L
N
Replacing
with
L
N
Ballast
Ignitor
Capacitor
Replacing HPS/HID Lamp
Self Ballasted CFL Wiring Diagram LED Retrofit Lamp Wiring Diagram
LED Retrofit Lamp Wiring Diagram
HPS/HID Wiring Diagram
Wiring Diagrams
Minimum Required Lamp Compartment Dimensions
• For LED Lowbay Retrofit lamp - 40W
*
Note: It is the customer's responsibility to verify that the lamp compartment meets the minimum required lamp
compartment dimension of 8" diameter by 11.1" long.
(800) 451-2606 VentureLighting.com
V
ENT U R E E T ROFI T
Lisez ces instructions complètement et attentivement
Avant que tu commences
LIGHTING’ S L E D L A M P
R
MANUEL UTILISATEUR
ARRÊT
ATTENTION
Risque de choc électrique
• Coupez l'alimentation du luminaire et suivre les procédures appropriées de
verrouillage / étiquetage avant de commencer l'installation ou l'entretien. Contactez
un électricien qualifié pour installation.
• L'installation de la lampe LED Retrofit Venture Lighting nécessite la connaissance des
systèmes électriques de luminaires. Si vous n'êtes pas qualifié, ne tentez pas de l'installation.
Contactez un électricien qualifié.
• Lampes Venture Lighting LED Retrofit exigent tension d'entrée 100V-277V. L'installateur est responsable de déterminer si la
tension appropriée est exécuté pour le luminaire étant desservi.
• Lampes Venture Lighting LED Retrofit fonctionnent sur la tension de la ligne et exigent que tous les ballasts, des condensateurs
et des démarreurs pour être contournées et / ou supprimés.
• Convient pour une utilisation dans des endroits secs ou humides seulement. Ne pas utiliser où directement exposée au liquide,
vapeur, la pluie ou la météo.
• Ce dispositif est pas destiné pour une utilisation avec les sorties de secours.
• Cet appareil n'est pas destiné à être utilisé avec des gradateurs.
• Le dispositif est adapté pour des luminaires fermés, cependant assurer qu'il ya suffisamment d'espace autour de l'appareil pour
la dissipation thermique.
• Le dispositif utilise un dissipateur de chaleur passive pour la dissipation thermique. Ne pas obstruer ou recouvrir la lampe car il
affecter les performances de la lampe et de la vie de la lampe.
• Le luminaire modifiée ne peut plus fonctionner comme il a été prévu à l'origine.
Instructions de mise
ÉTAPE 1: Coupez l'alimentation du luminaire et suivez les procédures de verrouillage / débranchement avant de commencer
l'installation ou l'entretien.
ÉTAPE 2: Retirez la lampe existante. Éliminer des lampes conformément aux exigences locales.
ÉTAPE 3: Débrancher et enlever le ballast, condensateur et l'amorceur existant. Éliminer des composants par les exigences locales.
ÉTAPE 4: Connectez la ligne Live wire (Ligne / spa) pour le contact central (oeillet) de la douille de lampe.
ÉTAPE 5: Connectez Ligne fil neutre (commun) à la coque du porte-lampe.
ÉTAPE 6: Insérez et vissez la lampe LED retrofit dans le support de la lampe.
ÉTAPE 7: Fermez le compartiment de câblage. Regarder pour être sûr que les fils ne sont pas coincés, liés ou sertis en fermant le
compartiment.
ÉTAPE 8: Fixez l'étiquette de remplacement Lamping qui est fourni avec la lampe de modernisation de l'appareil de sorte qu'il doit
être visible lors du remplacement.
ÉTAPE 9: Allumez le pouvoir.
© 2022 Venture Lighting International • Venture Lighting is a registered trademarks of Venture Lighting International.
(800) 451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail: [email protected]
VentureLighting.com
AE0004-B
L
N
Remplacement Auto Ballasted CFL Lamp
Remplacement
avec
L
N
Self lesté
CFL Lamp Lampe
LED Retrofit
HPS / HID
Lampe
Ballast
Allumeur
Condensateur
L
N
Remplacement
avec
L
N
Ballast
Allumeur
Condensateur
Remplacement de HPS/HID lampe
Schéma de câblage de la LCF Ballasted auto Schéma de câblage Lampe LED Retrofit
Schéma de câblage Lampe LED RetrofitSchéma de câblage HPS / HID
Schémas de Câblage
Minimum Requis Lampe Compartiment Dimensions
•
Pour LED Low Bay Retrofit Lampe - 40W
*
Note: Il est de la responsabilité du client de vérifier que le compartiment de la lampe est conforme au minimum
requis lampe compartiment dimension de 8" de dim ètre de 11,1" de long.
-
1
-
2
-
3
-
4
VENTURE LIGHTING AE0004 is a high-quality LED retrofit lamp designed to replace traditional HPS/HID and self-ballasted CFL lamps in enclosed fixtures. With its long-lasting performance and energy-saving capabilities, it is an excellent choice for both commercial and industrial applications. It operates on 100V-277V input voltage and offers a simple installation process, making it suitable for use in various lighting fixtures. It also features a passive heat sink for efficient heat dissipation, ensuring optimal performance and extending its lifespan.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
VENTURE LIGHTING AK0005-B User manual
-
VENTURE LIGHTING BF0001 User manual
-
VENTURE LIGHTING BF0020 User manual
-
VENTURE LIGHTING BF0013 User manual
-
VENTURE LIGHTING AS0042 User manual
-
VENTURE LIGHTING AP0010 User manual
-
VENTURE LIGHTING AP0006 User manual
-
VENTURE LIGHTING AP0004 User manual
-
VENTURE LIGHTING 10924 – VP10923-EM Indoor Vapor Tight LED Light Fixture User manual
-
VENTURE LIGHTING BO0002 LED VSolutions High Bay User manual
Other documents
-
venturelighting venture lighting AS0044-B LED STRIP LIGHT FIXTURE BATTERY BACKUP User manual
-
Westinghouse 5223000 Owner's manual
-
-
-
-
venture BF0011 User manual
-
SATCO NUVO S13130 120-277V Hi Pro LED Lamps User manual
-
GE current Type B BT56 EX39 Installation guide
-
Current LEDL116 Installation guide
-
Current LED21ED17/YXX Type B LED Lamp 120-277V Installation guide
