Baumer LXC-120M Quick start guide

Baumer
Brand
Baumer
Model
LXC-120M
Category
Security camera accessories
Type
Quick start guide
Quick Start Guide
LXC cameras (Camera Link
®
)
Product Specication
LXC cameras – Extremely high resolution and speed
▪ Camera Link
®
progressive scan CMOS camera
▪ Excellent image quality
▪ Global shutter architecture for minimized motion blur
▪ Binning and true partial scan function (ROI) for increased frame rates
▪ High Dynamic Range (HDR) image acquisition
▪ External synchronization via industrial compliant process interface (trigger / flash)
▪ Power over Camera Link
®
(PoCL) support
▪ Two standard 26 pin Mini-Camera Link
®
connectors
▪ Support for Camera Link
®
Base, Medium, Full and EightyBit configurations
▪ Camera parameter programmable via GenCP protocol
Notice
Further technical details are available in the respective data sheet.
Dimensions Camera with C-Mount
60
47
47
60
4 x M3 x 6
26
8
8 x M3 x 6
47,95
38,45
43,05
17,5
17,5
20
19,2
48,8
14,7
18,035 ±0,025
8
26
26
8
Pixel 0,0
1"-32 UN
30
4,9
6
(LXC-40C)
Lens Adapter for M58-Mount
▪ Adapter M58 / F-mount
(Art. No.: 11117852)
▪ Adapter M58 / M42x1-mount (26.8mm)
(Art. No.: 11127232)
▪ Adapter M58 / M42x1-mount (45.5 mm)
(Art. No.: 11137781)
▪
Notice
suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I,
Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-Mount,
LM35LF P-Mount)
▪ Adapter M58 / C-mount
(Art. No: 11115198)
Dimensions Camera with M58-Mount
60
47
47
60
4 x M3 x 6
26
8
8 x M3 x 6
47,95 /
*)
50,02
38,45 /
*)
40,52
43,05 /
*)
45,12
17,5
17,5
20
19,2
48,8
14,7
12 ±0,025
8
26
26
8
Pixel 0,0
M58 x 0,75
38,3
*)
LXC-250
Conformity / Safety
Saety Precautions
▪ Protect the sensor from dirt and
moisture.
▪ Never open the camera housing.
▪ Avoid camera contamination by foreign
objects.
Environmental requirements:
Storage temp. -10 °C ... +70 °C
Operating temp. +5 °C ... +50 °C
Housing temp. max. +50 °C
Humidity 10 % ... 90 %
Non-condensing
Further Information
For further information about our products, please visit www.baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com · Phone +49 (0)3528 4386-845 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter is not guaranteed.The
information in this document is subject to change without notice.
Printed in Germany 09/20. v17 11160606
Download latest camera software:
www.baumer.com/vision/software
Download latest technical documentation:
www.baumer.com/cameras/docs
Conformity
We declare, under our sole responsibility, that the
described Baumer LXC cameras conform with the
directives of the CE.
All LXC cameras comply with the recommendation of
the European Union concerning RoHS Rules.
Several of the described Baumer LXC cameras con-
form with the directives of the Korean Conformity.
Please refer for the User’s guide or technical
documentation.
LED Signaling
LED
Signal Meaning
LED
green on Power on, link good
green blinking Power on, no link
red on Error / Overtemperature
red blinking
Boot process or Warning
(update in progress, don’t switch off)
yellow Readout active
General Description
1
2
3
4
5
No. Description No. Description
1
C-Mount
C-mount only
M58-Mount
lens mount (M58), adapter for
other lens mounts available
4 Signaling-LED
2
Camera Link
®
socket
(Base)
5
Camera Link
®
socket
(Medium / Full / EightyBit)
3 Power Supply / Digital-IO
Heat Transmission
Caution
Provide adequate dissipation of heat, to ensure that the temperature
does not exceed +50 °C (+122 °F).
The surface of the camera may be hot during operation and immediately
after use. Be careful when handling the camera and avoid contact over a
longer period.
As there are numerous possibilities for installation, Baumer do not speci-
y a specic method for proper heat dissipation, but suggest the following
principles:
▪ operate the cameras only in mounted condition
▪ mounting in combination with forced convection may provide proper
heat dissipation
T
T
Measure Point Maximal Temperature
T +50 °C (122 °F)
Camera Link
®
sockets
Notice
Baumer
Type: XXXXXx
(xxxxxxx)
CL FULL
CL BASE
The camera has two Camera Link
®
sockets. To differentiate bet-
ween Camera Link
®
socket, please look at the label. You can not
use the CL Medium / Full / EightyBit socket alone!
Notice
To use Power over Camera Link
®
(PoCL, 12V DC ± 20%), both Camera Link
®
sockets must be used.
Camera Link
®
(Base)
Camera Link
®
(Medium / Full / EightyBit)
Pin Signal Pin Signal Pin Signal Pin Signal
1 GND 14 GND 1 GND 14 GND
2 X0- 15 X0+ 2 Y0- 15 Y0+
3 X1- 16 X1+ 3 Y1- 16 Y1+
4 X2- 17 X2+ 4 Y2- 17 Y2+
5 XCLK- 18 XCLK+ 5 YCLK- 18 YCLK+
6 X3- 19 X3+ 6 Y3- 19 Y3+
7 SERTC+ 20 SERTC- 7 100 Ω term. 20 100 Ω term.
8 SERTFG- 21 SERTFG+ 8 Z0- 21 Z0+
9 CC1- 22 CC1+ 9 Z1- 22 Z1+
10 CC2+ 23 CC2- 10 Z2- 23 Z2+
11 CC3- 24 CC3+ 11 ZCLK- 24 ZCLK+
12 CC4+ 25 CC4- 12 Z3- 25 Z3+
13 GND 26 GND 13 GND 26 GND
Power Supply and Process Interface
Caution
A power supply with electrical isolation is required for proper operation of
the camera. Otherwise the device may be damaged!
Power Supply / Digital-IO
M8 / 8 pins wire colors of the connecting cable
8
5
7
3
1
4
2
6
1 white not in use
2 brown Power VCC+
3 green IN 1 (line 0)
4 yellow IO GND
5 grey IO Power VCC
6 pink OUT 1 (line 1)
7 blue Power GND
8 red not in use
Power Supply
Power VCC 12 VDC ... 24 VDC ± 20%
Installation
Installation using
Camera Link
®
Base:
▪ Connect the camera using
an appropriate cable to the
framegrabber board on your
PC using the lower sdr-26
jack on the camera side
▪ If required, connect a strobe
to the connector
▪ Connect the camera to
power supply
Installation using
Camera Link
®
Medium / Full
/ EightyBit:
▪ Connect the camera using
two appropriate cables to
the framegrabber board on
your PC.
▪ If required, connect a strobe
to the connector
▪ Connect the camera to
power supply
Installation sample
1 - Framegrabber board; 2 - CameraLink
®
cable;
3 - Process interface cable; 4 - Power cable
Installation sample
1 - Framegrabber board; 2 - CameraLink
®
cable;
3 - Process interface cable; 4 - Power cable
  • Page 1 1
  • Page 2 2

Baumer LXC-120M Quick start guide

Baumer
Brand
Baumer
Model
LXC-120M
Category
Security camera accessories
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents