Laney Amplification CX10 User manual

Brand: Laney Amplification

Model: CX10

Type: User manual

Laney Amplification CX10 features a power rating of 150W RMS and a program power rating of 300W. With an impedance of 8 ohms and a frequency range of 70Hz to 18KHz, this speaker delivers clear and powerful audio. It has a compact size of 350310520mm, making it suitable for various applications. The CX10 also comes with a 35mm pole stand fitting for flexible placement options.

Series

Thank you for purchasing a CX series loudspeaker.

In order to take full advantage of it and enjoy long and trouble-free performance, please read this owner's manual

carefully, and keep it in a safe place for future reference.

1) Read Instructions carefully before installing or operating this product.

2) Retain these instructions

3) Comply with warnings: All warnings and instructions for these products should be adhered to.

4) Unpacking: Please retain the packing carton and liners in case the unit should need to be returned at any time.

5) Amplifier connection. In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off

your sound system.

With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc.

BEFORE turning on your power amplifier. Many products have large transient surges at turn on and off which can cause

damage to your speakers.

By turning on your power amplifier LAST and making sure its level control are set to minimum any transients from other

equipment will not reach your loudspeakers.

Wait until all system parts have stabilised usually a couple of seconds.

Similarly when turning off your system always turn down the level controls on your power amplifier and then turn off its

power before turning off other equipment.

6) Cables- never use shielded or microphone cable for any speaker connections as this will not be substantial enough to

handle the amplifier load and could cause damage to your complete system.

7) Rigging or suspended mounting. The rigging or suspended mounting of these speakers can expose members of the

public to serious health risks or even death. Under no circumstances attempt to rig, suspend or otherwise mount this

system unless you are fully qualified and certified to do so by relevant local, state and national authorities. All

relevant safety regulations must be followed. If you are not properly qualified or do not know of pertinent

regulations, consult qualified personnel for advice and assistance.

When mounted on a propriety tripod pole stand ensure the system is fully stable and can not fall over. We do not

recommend poles stands to be used higher than 1.5 metres, without extra support.

8) Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use

care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage.

9) Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.

General Specifications:

Power Rating RMSPower Rating RMS

Program Power RatingProgram Power Rating

ImpedanceImpedance

Frequency RangeFrequency Range

Size W*D*HSize W*D*H

Pole Stand Fitting DiaPole Stand Fitting Dia

Weight KgWeight Kg

CX10CX10

150W150W

300W300W

8 8

70Hz>18KHz70Hz>18KHz

350*310*520350*310*520

35mm35mm

9.4Kg9.4Kg

CX12CX12

200W200W

400W400W

8 8

60Hz>18Khz60Hz>18Khz

410*330*620410*330*620

35mm35mm

15Kg15Kg

CX15CX15

250W250W

500W500W

8 8

50Hz>18Khz50Hz>18Khz

500*360*700500*360*700

35mm35mm

20Kg20Kg

LaneyLaney

www.laney.co.uk

User ManualUser Manual

Revision 1.0

Features and Specifications Subject To Change Without Notice

cx10,cx12,cx15cx10,cx12,cx15

Laney Amplification CX10 User manual

Brand: Laney Amplification

Model: CX10

Type: User manual

Download PDF

report

Laney Amplification CX10 User manual

Laney Amplification CX10 User manual

Related papers

Other documents