Laney Amplification CX10 User manual

Type
User manual

Laney Amplification CX10 features a power rating of 150W RMS and a program power rating of 300W. With an impedance of 8 ohms and a frequency range of 70Hz to 18KHz, this speaker delivers clear and powerful audio. It has a compact size of 350310520mm, making it suitable for various applications. The CX10 also comes with a 35mm pole stand fitting for flexible placement options.

Laney Amplification CX10 features a power rating of 150W RMS and a program power rating of 300W. With an impedance of 8 ohms and a frequency range of 70Hz to 18KHz, this speaker delivers clear and powerful audio. It has a compact size of 350310520mm, making it suitable for various applications. The CX10 also comes with a 35mm pole stand fitting for flexible placement options.

CX
Series
CX
Series
Thank you for purchasing a CX series loudspeaker.
In order to take full advantage of it and enjoy long and trouble-free performance, please read this owner's manual
carefully, and keep it in a safe place for future reference.
1) Read Instructions carefully before installing or operating this product.
2) Retain these instructions
3) Comply with warnings: All warnings and instructions for these products should be adhered to.
4) Unpacking: Please retain the packing carton and liners in case the unit should need to be returned at any time.
5) Amplifier connection. In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off
your sound system.
With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc.
BEFORE turning on your power amplifier. Many products have large transient surges at turn on and off which can cause
damage to your speakers.
By turning on your power amplifier LAST and making sure its level control are set to minimum any transients from other
equipment will not reach your loudspeakers.
Wait until all system parts have stabilised usually a couple of seconds.
Similarly when turning off your system always turn down the level controls on your power amplifier and then turn off its
power before turning off other equipment.
6) Cables- never use shielded or microphone cable for any speaker connections as this will not be substantial enough to
handle the amplifier load and could cause damage to your complete system.
7) Rigging or suspended mounting. The rigging or suspended mounting of these speakers can expose members of the
public to serious health risks or even death. Under no circumstances attempt to rig, suspend or otherwise mount this
system unless you are fully qualified and certified to do so by relevant local, state and national authorities. All
relevant safety regulations must be followed. If you are not properly qualified or do not know of pertinent
regulations, consult qualified personnel for advice and assistance.
When mounted on a propriety tripod pole stand ensure the system is fully stable and can not fall over. We do not
recommend poles stands to be used higher than 1.5 metres, without extra support.
8) Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use
care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage.
9) Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.
General Specifications:
Power Rating RMSPower Rating RMS
Program Power RatingProgram Power Rating
ImpedanceImpedance
Frequency RangeFrequency Range
Size W*D*HSize W*D*H
Pole Stand Fitting DiaPole Stand Fitting Dia
Weight KgWeight Kg
CX10CX10
150W150W
300W300W
8 8
70Hz>18KHz70Hz>18KHz
350*310*520350*310*520
35mm35mm
9.4Kg9.4Kg
CX12CX12
200W200W
400W400W
8 8
60Hz>18Khz60Hz>18Khz
410*330*620410*330*620
35mm35mm
15Kg15Kg
CX15CX15
250W250W
500W500W
8 8
50Hz>18Khz50Hz>18Khz
500*360*700500*360*700
35mm35mm
20Kg20Kg
LaneyLaney
www.laney.co.uk
User ManualUser Manual
Revision 1.0
Features and Specifications Subject To Change Without Notice
cx10,cx12,cx15cx10,cx12,cx15
  • Page 1 1

Laney Amplification CX10 User manual

Type
User manual

Laney Amplification CX10 features a power rating of 150W RMS and a program power rating of 300W. With an impedance of 8 ohms and a frequency range of 70Hz to 18KHz, this speaker delivers clear and powerful audio. It has a compact size of 350310520mm, making it suitable for various applications. The CX10 also comes with a 35mm pole stand fitting for flexible placement options.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI