Foster 8331 012 Datasheet

Foster
Brand
Foster
Model
8331 012
Type
Datasheet
22
23
page 82
Foster takes great care to use materials able to provide the best performance.
Our entire range is made with AISI 304 - 18/10 austenitic steels. Thanks to the
high percentages of chrome and nickel they contain, they give a particularly
bright finish, and make the products extremely sturdy and absolutely resistant
to rust and corrosion.
The Sinks
Complements page 104
Undermount
sinks
S4000 page 41
Big Bowl page 59
Big Bowl Soft page 61
Uragano page 62
Tornado page 63
Triplo invaso page 68
F2000 page 70
Trapezio page 72
Diamant page 73
Angolare page 74
Rondò page 76
Circolari page 77
S1000 page 78
Quadra page 43
Quadra S page 47
KE page 48
KS page 56
FM page 54
S3000 page 51
S4001 page 38 Alien 2 page 66
Sinks
24
24
24
24
24
4
24
4
4
24
24
24
24
24
24
24
24
24
2424
24
24
24
24
24
24
24
4
24
24
24
24
24
4
Designer finishes
The exclusive finishes on Foster steels are the result of painstaking research, the aim being to achieve the perfect combination
between good looks and functionality.
A distinctive feature, a true trademark that makes our products stand out for the ease with which they can be cleaned.
Microfoster
finish
Design
finish
Foster
finish
Foster brushed finish
The steel is treated with special vegetable
fibres that give it the characteristic
extrafine satin finish that is highly elegant
and functional. This makes the surfaces
very smooth and easy to clean.
Microfoster
®
finish
A scratchproof finish with an exclusive,
extrafine and almost imperceptible
textured appearance that gives the steel
a special shine and sets off the style to
its best effect.
Design
finish
Scratchproof finish with an original and
elegant texture that protects the material
from accidental scuffing and from wear
through use.
25
67'
4
6)
)7
FT
67
)7
FT
6)
Flush-mount
The product is sunk in 1,5 mm deep
recess thus beeing perfectly flush with
the worktop. As alternative, it can be
installed on the worktop as well.
Flush-mount & Flat-edge: a clarification to be done
Many manufacturers indicate as Flat-edge a Flush-mount edge mounted on the
worktop.
For Foster Flat-edge means a real alternative built-in solution with an elegant 3 mm
sloping edge.
In any case, Foster's Flush-mount models can be mounted on the worktop (as in
the detail in the picture), thus offering a further built-in solution.
Undermount
A classy and contemporary idea, to be
installed under the worktop; available
in various types of sinks, with soft or
square design.
Built-in
The most stylish and assertively
professional solution is to weld the sink
to the stainless steel worktop, producing
one sleek, seamless block.
Standard
Traditional built-in with the vertical, 8-mm
edge.
Q4
The casing has a square edge that
stands on the work surface by just 4 mm.
Great solution to match the sink with the
ceramic glass hobs (Induction).
Flat-edge
An original edge, with an inclined, 3
mm high profile, matching an extreme
elegance with the easiness of installation.
The methods with which worktops can be built-in have become increasingly more varied and customized. Foster was the first
sink manufacturer to have researched and used the new recessing methods and has thus acquired a great deal of experience.
It now offers the most comprehensive range available on the market, with flush-mount, flat-edge and undermount installation.
Built-in and beyond
Sinks
26
27
Sturdy sinks
For every type of sink (welded or single-
moulded) and price bracket, Foster works
with above-average steel thickness when
compared to other manufacturers. As a
result, also owing to our long experience,
we are able to construct “sturdy” sinks
displaying a unique design.
Spacious bowls
Thanks to the pioneering manufacturing
technology used, all the bowls in Foster
sinks provide a generous depth (even
the single-moulded versions, i.e. formed
from a single sheet of steel). The bowls
in many of the versions are more than
20 cm deep, thus sizeable and practical
for all washing operations.
Waste fittings
Foster sinks are equipped with a
generously sized 3.5” waste fitting and
practical strainer plug that prevents
solids from flowing away with the
waste water. The 3.5” drain allows
the Foster waste-disposer, which is
compatible with all models, to be used.
(Compatibility with the waste-disposer of
other manufacturers is not guaranteed).
Mixer hole
All Foster sinks (unless otherwise
requested) are supplied with the mixer
installation hole as a standard feature.
Several sink models may be requested
with two or three holes for immediately
inserting the automatic waste control or
dispenser. To verify the availability of the
second or third hole, please refer to the
specifications on the drawing, or contact
our offices directly (see page 104).
Waste fitting with remote control
The waste fitting with remote control
is part of the standard equipment
supplied with some of the models. A
very convenient accessory that saves
you from wetting your hands when the
bowl needs emptying (see page 107).
Accessories
To complement the functionalities of
the sinks, Foster offers a full range of
accessories, whether wooden chopping
boards, dispensers, baskets, dishes
holders or food waste disposers.
In designing a kitchen, it is essential to create a washing area tailored to one’s requirements.
As a matter of fact, statistics show that most of the time spent in the kitchen involves preparing and cleaning food or washing
dishes, therefore, using the sink.
Essential aspects to consider when choosing a sink include the quality of the steel, manufacturer’s warranty, shape and size of
the bowls and available accessories, be they standard or optional. Foster offers all of this in over 300 items, to enable everyone
to choose his/her “OWN” sink.
Features
Sinks
28
4
)7
67'
4
)7
)7
6)
67'
4
)7
)7
67'
4
)7
67'
)7
6)
67'
)7
67'
)7
6)
67'
)7
6)
67'
6)
67'
)7
6)
)7
67'
)7
6)
67' 67'
6)
67'
67'
6)
67'
67' 67' 67' 67'
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
On-top and flush-mount range
120 - models from 101 to 120 cm width 100 - models from 91 to 100 cm width
Angular solutions
S4001 - page 38
S4000 - page 41
KS - page 56
S4001 - page 38
Quadra - page 43
QuadraS - page 47
KE - page 48
Alien2 - page 66
Big Bowl - page 59
KE - page 48 F2000 - page 70
Uragano - page 62
Alien2 - page 66
S3000 - page 51
S3000 - page 51
S1000 - page 78
FM - page 54
Angolari - pages 74-75
S1000 - page 78
FM - page 54
KS - page 56
S4000 - page 41
Quadra - page 43
29
4
)7
4
)7
67' 67'
4
)7
4
67' 67'
4
)7
6)
67'
)7
67'
4
4
)7
6)
67' 67'
)7
4
)7
6)
67' 67'
4
)7
)7
67'
4
)7
6)
67'
67'
4
)7
6)
67' 67' 67'
6) 6) 6)
)7
6)
67'
4
67
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
90 - models from 81 to 90 cm width
Semi-angular solutions
Key to symbols
Standard
Q4
Flat-edge
Flush-mount
Brushed finish
Microfoster finish
Design finish
S4000 - pages 41-42
KS - page 57
Big Bowl-BB Soft - pages 59-61
Triplo invaso - pages 68-69
S3000 - pages 51-52
Quadra - page 44
F2000 - page 70
Quadra S - page 47
Trapezio - page 72 Diamant - page 73
S1000 - page 79
Alien 2 - pages 66-67
KE - page 49
FM - pages 54-55S4001 - page 38
Continued on next page >>>
Undermount range
see pages 86-87
GK series sinks
see pages XII-XIV
On-top and flush-mount range
Sinks
30
)7
6)
67'
)7
4
)7
6)
)7
67'
)7 )7
4
67'
4
67'
67' 67'
6)
4
67'
67'
)7 )7
67'
)7
6)
)7
67'
)7 )7 )7
67'
)7
4
67' 67'
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
80 - models from 71 to 80 cm width 60 - models from 51 to 60 cm width
< 50 - models below 60 cm width
S4001 bowl - page 39
S4001 bowls - page 40 Quadra - page 45
S3000 bowl - page 53
S4001 bowls - page 39
S3000 bowls - page 53 S1000 - page 80
Quadra - pages 44-45 Big Bowl - page 60
S1000 - pages 79-80
KE - page 50
S3000 - page 52
Big Bowl Soft - page 61
KS - page 58 Circolare-Rondò - pages 76-77
KE - page 50
Tornado - page 63
F2000 - page 71
Quadra - page 44
On-top and flush-mount range
31
)7
Big Bowl Soft 86
1v FT
cod. 1061 261
Veronika Soft 5F FT
cod. 7267 032
67'
4
6)
Combinations
Foster is one of the very few companies manufacturing both sinks and hobs. This enables us to pursue a policy of matching
of shape and designs on the horizontal worktop: for kitchens in which every detail counts.
the same material (AISI 304) and finish
the same dimension
the same type of edge
the same shape (R 151)
Q4
Q4 edge matches perfectly with
induction hobs which feature a 4 mm
glass thickness.
Standard
Foster range offers countless cooking-
washing combinations with standard
8 mm built-in.
Flat-edge
The Flat-edge solution is always
available in the most prestigious series,
for highly stylish combinations.
Sinks
32
An allocation of increasingly rich and designed accessories features Foster’s proposals.
All models are accompanied with cutting boards, bowls, dishes holders and colanders that enhance the aesthetics and
functionality of your sink. The full range is presented on the following pages.
Complements that make the difference
33
Space and time, more and more valuable items in the kitchen.
For this reason Foster has designed integrated systems of accessories that enhance your every move, and minimize space
when not in use.
The big bowls...with many accessories
Foster range is particularly rich in sinks with large single bowls. From the functional point of view this is in fact the best solution:
a single large basin which can contain dishes and objects of considerable size, equipped with bowls, baskets and chopping
boards which make the working area flexible and perfectly functional. In the picture: N2 chopping board matches with O2 bowl
and T1 dishes holder, to form a complete set of great elegance.
A versatile chopping board
The Twin Hdpe chopping board N3 combines with the new kit P2 to accommodate graters and the containment bowl below.
Other accessories can be inserted in the outer ring of the chopping board, as the dishes holder T2 or the colander Z2.
Modular sets
Sinks
34
L5
M
L4
ECBA
H L2I L3
N2 N3 P2
G
M2 M3
B3B2
Σ
KJ
8633 300
8643 000
8631 300
8655 000 8653 000 8654 000 8647 000
8659 111 8644 0038659 112 8644 004
8657 001 8644 101 8159 101
8646 000
8643 115 8643 116
8642 002 8642 001
8644 0408648 000 8651 000
P2
The chopping boards
The wide range of boards includes many proposals in precious woods, highly resistant to wear and absorption of liquids, to
ensure health and long life. Glass and synthetic models, round off Foster’ solutions.
Glass chopping board
29x54 cm
Sliding chopping board
30x54 cm
Glass chopping board
23x41 cm
Chopping board
45x40 cm
Chopping board
29x40 cm
Chopping board
36x40 cm
Chopping board
34x40 cm
Chopping board
37x30 cm
Twin Chopping board
37x46 cm
Chopping board
37x46 cm
Twin chopping board
41x41 cm
HDPE chopping board
27,2x42,5 cm
Chopping board
40x40 cm
Chopping board
28x48 cm
Sliding chopping board
28x48
Chopping board
34,5x40 cm
Chopping board
36x40 cm
Padouk wood Twin chopping board
35,2x45,7 cm
Iroko chopping board Round chopping board
Ø40 cm
Wood chopping boards
Glass chopping boards HDPE chopping boards & kit
HDPE Twin
chopping board
31,7x42,5 cm
Grating kit complete
with ring support and
food collection bowl
35
T1 T2
O2
O U
U
T
Z
Z2
β1
R
Q
S S1
β
U2
Ξ
Δ
X
Y
δ
W
α
8100 201 8100 3038153 1008152 100 8100 1118100 154
8154 000 8151 000
8100 301
8611 000
8151 100
8612 000 8612 100
8100 2808100 112
8100 115
8100 040
8154 040
8610 000
8153 000 8153 001
8100 331
8601 000
T2
Baskets, colanders and bowls
Baskets, colanders and bowls. Each Foster sinks can easily be enriched with valuable additions that will help you in all your
work in the kitchen.
St. steel dishes holder
25x42,5 cm
White bowl
41,4x27,2 cm
White bowl
36x30 cm
St. steel bowl holder
37x45 cm
St. steel dishes holder
25x45 cm
St. steel dishes holder
25x35 cm
St. steel colander
25x36 cm
St. steel dishes holder
25x43 cm
St. steel basket
34x40 cm
White colander
17x32 cm
St. steel basket
40x40 cm
White basket
40x40 cm
St. steel dishes holder
28x40 cm
St. steel dishes holder
23x47 cm
St. steel dishes holder
St. steel colander
St. steel basket
St. steel colander St. steel colander
St. steel dishes holder
Round White basket
Ø36 cm
Dishes holders and bowls
Baskets for bowls
Colanders
St. steel dishes holder
21,4x37,9 cm
St. steel perforated
pan 21,5x38 cm
Sinks
36
36
36
36
36
3
37
726
764
A G L4
67'
6)
)7
Types of installation
Many Foster sinks are available in a variety o versions
(Standard, Flush-mount, Flat-edge and Undermount)
that can have slightly different dimensions. Therefore we
reccomend to check the specifications besides every
version. The built-in type to which figures are referred is
always specified under the drawing.
Accessories
Always striving to blend aesthetics and functionality,
Foster devotes special attention to its products’
Accessories. This catalogue places special emphasis
on the optional features indicated below each model, to
facilitate identification of the proper combinations.
Mixer tap holes
In the drawings standard tap holes are shown with
continuous line. Further possible holes on request,
in order to install the automatic waste fitting and the
dispenser, are shown with a dashed line. For some
models, customization with additional holes can be done
with some extra costs.
How to read the catalogue (sinks chapter)
Cabinet
“Cabinet” refers to the smallest standard element of a
modular kitchen in which a sink can be fitted in.
In some cases you may find a double standard:
(ß) for fitting in top at least 40 mm thick, consider the smaller
measure, as indicated in parentheses (e.g. page 43);
(T) for fitting in the beginning/end of composition, consider
the bigger measure, as indicated in parentheses.
For special fittings that require extra adaptations to the
furniture, please refer to the kitchen manufacturer.
Chopping board
34x40
8647 000
Chopping board
40x40
8646 000
Glass chopping board
23x41 cm
8631 300
Features Version Code Technical Drawing
Cabinet 90
Accessories:
A
G
L4
N2
N3
O2
P2
R
S
T2
β1
For Standard and Flat-edge version only:
L5
M
finish: brushed
dimensions: 1160x500
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
1312 061 dx
1312 062 sx
External dimensions refer to
standard version
Packing: 1240x560x250 mm 11,5 kg
finish: brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
1318 061 dx
1318 062 sx
finish: brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: see packaging
drain: 3½”
1315 061 dx
1315 062 sx
Accessories
Cabinet 80 cm
Right-hand, left-hand and reversible sinks
The double code for a single model indicates that both
right-hand and left-hand versions are available. The
right-hand version (dx) refers to a sink with the bowl (or
bigger bowl on models without drainer) on the right. Left-
hand versions are identified by the code “sx”. The single
code indicates that the sink is reversible, or that only
the version shown in the picture or drawing is available.
Sinks
38
Kelvin
(8470 000 - pag. 114)
Camillo
(8467 000 - pag. 116)
4
)7
FT
4
)7
FT
4
)7
FT
4)
C
amillo
(84
67 000 -
pag
. 1
16)
NEW
NEW
NEW
NEW
NEW
NEW
Cabinet 60
Picture shows sx version
Available from September
Accessories:
L4
N2
N3
O2
P2
R
T1
T2
Z2
For Q4 version only:
L5
M
AISI 304 brushed
dimensions: 860x500
1 bowl: 450x400
cut-out: 840x480
drain: SPACE 3½”
4483 061 dx
4483 062 sx
External dimensions refer to
Flush-mount version
Packing: 940x570x260 mm 10,5 kg
AISI 304 brushed
dimensions: 873x513
1 bowl: 450x400
cut-out: see page 251
drain: SPACE 3½”
4486 061 dx
4486 062 sx
Cabinet 60/(80)
T
(ref. page 37)
Picture shows sx version
Available from September
Accessories:
L4
N2
N3
O2
P2
R
T1
T2
Z2
For Q4 version only:
L5
M
AISI 304 brushed
dimensions: 970x500
2b: 340x400+170x340
cut-out: 950x480
automatic drain
SPACE 3½”
4462 061 dx
4462 062 sx
External dimensions refer to
Flush-mount version
Packing: 1050x570x260 mm 12,8 kg
AISI 304 brushed
dimensions: 983x513
2b: 340x400+170x340
cut-out: see page 251
automatic drain
SPACE 3½”
4465 061 dx
4465 062 sx
Features Version Code Technical Drawing
Cabinet 80
Picture shows sx version
Available from September
Accessories:
L4
N2
N3
O2
P2
R
T1
T2
Z2
For Q4 version only:
L5
M
AISI 304 brushed
dimensions: 1160x500
1 bowl: 710x400
cut-out: 1140x480
drain: SPACE 3½”
4416 061 dx
4416 062 sx
External dimensions refer to
Flush-mount version
Packing: 1240x570x260 mm 14 kg
AISI 304 brushed
dimensions: 1173x513
1 bowl: 710x400
cut-out: see page 251
drain: SPACE 3½”
4417 061 dx
4417 062 sx
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
The evolution of S4000 sinks with new bowls with an even tighter radius, enriched by new drain with stainless steel plug and the exclusive perimetric overflow.
S4001
suggested mixer taps
39
)7
FT
)7
FT
)7
FT
Tre Alto
(8468 000 - pag. 122)
1/2 Circle
(8480 000 - pag. 120)
NEW
NEW
NEW
NEW
NEW
NEW
Features Version Code Technical Drawing
Cabinet 80
Available from September
Accessories:
L3
L4
N2
N3
O2
P2
S
T
T1
Z
T2
Z2
Automatic waste fitting:
PA
(page 106)
AISI 304 brushed
dimensions: 760x450
1 bowl: 710x400
cut-out: see page 251
drain: SPACE 3½”
3127 060
Packing: 930x520x250 mm 7,8 Kg
Cabinet 60
Available from September
Accessories:
L3
L4
N2
N3
O2
P2
S
T
T1
Z
T2
Z2
Automatic waste fitting:
PA
(page 106)
AISI 304 brushed
dimensions: 550x450
1 bowl: 500x400
cut-out: see page 251
drain: SPACE 3½”
3125 060
Packing: 650x520x250 mm 7,3 Kg
Cabinet 60
Available from September
Accessories:
L3
L4
N2
N3
O2
P2
S
T
T1
Z
T2
Z2
Automatic waste fitting:
PA
(page 106)
AISI 304 brushed
dimensions: 500x450
1 bowl: 450x400
cut-out: see page 251
drain: SPACE 3½”
3124 060
Packing: 550x520x250 mm 5,9 Kg
suggested mixer taps
S4001
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
R12 sinks range is the new series of flush-mount bowls featuring a particularly tight radius and and valuable fittings such as the stainless steel space-saving drain
and the elegant perimetric overflow.
Sinks
40
)7
FT
)7
FT
)7
FT
NEW
NEW
NEW
NEW
NEW
NEW
Features Version Code Technical Drawing
Cabinet 45
Available from September
Accessories:
L3
L4
N2
N3
O2
P2
PA
S
T
T1
Z
T2
Z2
Automatic waste fitting:
PA
(page 106)
AISI 304 brushed
dimensions: 450x450
1 bowl: 400x400
cut-out: see page 251
drain: SPACE 3½”
3126 060
Packing: 460x520x250 mm 5,6 kg
Cabinet 40
Available from September
Accessories:
L4
N2
N3
O2
P2
PA
R
T1
T2
Z2
Automatic waste fitting:
PA
(page 106)
AISI 304 brushed
dimensions: 390x450
1 bowl: 340x400
cut-out: see page 251
drain: SPACE 3½”
3123 060
Packing: 460x520x250 mm 5,3 kg
Cabinet 30
Available from September
Automatic waste fitting:
PA
(page 106)
AISI 304 brushed
dimensions: 220x450
1 bowl: 170x400
cut-out: see page 251
drain: SPACE 3½”
3121 060
S4001
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
*
To use only with L3 chopping board
**
To use only with N3 chopping board
L5
M
R
**
T2
page 35
L3
Twin chopping
board
41x41 cm
8644 004
L4
Glass chopping
board
23x41 cm
8631 300
N2
HDPE chopping
board
27,2x42,5 cm
8657 001
N3
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
O2
White plastic bowl
27,2x41,4 cm
8153 100
P2
**
Grating kit
complete with
ring support and
food collection tray
8159 101
PA
Automatic waste
fitting SPACE see
page 106
8407 108
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
T
*
St. steel dishes
holder 25x35 cm
8100 154
T1
St. steel dishes
holder 25x42,5 cm
8100 201
Z
*
St. steel colander
25x36 cm
8154 000
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
41
Kelvin
(8470 000 - pag. 114)
Camillo
(8467 000 - pag. 116)
4
)7
FT
4
)7
FT
4
)7
FT
*
Cabinet 90
Accessories:
L4
N2
N3
O2
P2
R
T1
T2
Z2
For Q4 version only:
L5
M
AISI 304 brushed
dimensions: 860x500
2b: 340x400+400x400
cut-out: 840x480
automatic drain
Premium 3½”
*
4382 060
External dimensions refer to
Flush-mount version
Third tap hole available
Packing: 940x570x260 mm 10,9 kg
AISI 304 brushed
dimensions: 873x513
2b: 340x400+400x400
cut-out: see page 251
automatic drain
Premium 3½”
*
4385 060
Cabinet 60/(80)
T
(ref. page 37)
Picture shows sx version
Accessories:
L4
N2
N3
O2
P2
R
T1
T2
Z2
For Q4 version only:
L5
M
AISI 304 brushed
dimensions: 970x500
2b: 180x400+340x400
cut-out: 950x480
automatic drain
Premium 3½”
*
4362 061 dx
4362 062 sx
External dimensions refer to
Flush-mount version
Third tap hole available
Packing: 1050x570x260 mm 12,9 kg
AISI 304 brushed
dimensions: 983x513
2b: 180x400+340x400
cut-out: see page 251
automatic drain
Premium 3½”
*
4365 061 dx
4365 062 sx
Features Version Code Technical Drawing
Cabinet 80
Picture shows sx version
Accessories:
L4
N2
N3
O2
P2
R
T1
T2
Z2
For Q4 version only:
L5
M
AISI 304 brushed
dimensions: 1160x500
2 bowls: 340x400
cut-out: 1140x480
drain: Premium 3½”
4312 061 dx
4312 062 sx
External dimensions refer to
Flush-mount version
Packing: 1240x570x260 mm 14,9 kg
AISI 304 brushed
dimensions: 1173x513
2 bowls: 340x400
cut-out: see page 251
drain: Premium 3½”
4315 061 dx
4315 062 sx
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
One of he hallmark of the S4000 sink range is the built-in draining board, an indispensable addition for a functional and clean kitchen.
S4000
suggested mixer taps
Sinks
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122

Foster 8331 012 Datasheet

Foster
Brand
Foster
Model
8331 012
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents