VMB TE-034 Profi Towerlift 125 kg schwarz User manual

Brand: VMB

Model: TE-034 Profi Towerlift 125 kg schwarz

Type: User manual

This manual is also suitable for

V.04.14

OPERATING INSTRUCTIONS USER MANUAL

MANUAL DE INSTRUCCIONES

TOWERLIFT

TORRE ELEVADORA

TE-034

GBE

USA

LIFTING TOWER TE-034

TORRE ELEVADORA TE-034

PRO LIFTS S.L.

C/ Ciudad de Barcelona Nº19

Pol.Ind. Fuente del Jarro

46988 Paterna (Valencia)

Tlf Export: +34 96 171 81 86

Tlf Nacional: 96 171 81 83

[email protected] - www.prolifts.es

Manufacturer - Fabricante

Este manual de usuario y catálogo anexo de piezas de repuesto es propiedad de PRO LIFTS S.L.

Queda prohibida su reproducción total o parcial por cualquier medio que la tecnología actual permita.

MADE IN SPAIN (EU)

BGV-C1

BGG-912

EC Conformity Declaration pursuant to the EC Machinery

Directives 89/392/CE and 98/37/CE: Manual lifters

Find a copy of the certiﬁ cations at the end of this booklet.

Puede ver una copia de las certiﬁ caciones al ﬁ nal del manual.

CERTIFICATIONS / CERTIFICACIONES

Page is loading ...

Quick operation guide

ENGLISH

CONTENTS

1. Introduction.

2. Technical information.

3. Safety precautions.

4. Operation.

5. Maintenance.

6. Guarantee.

1. INTRODUCTION

Dear customer,

In order to ensure a safe and reliable ope-

ration of the TE-034 towerlift please follow

the instructions in this booklet carefully.

Before operating the lift, read the instruc-

tions completely and please note the te-

chnical information contained within this

manual.

All VMB products undergo very rigorous

testing, under strict conditions and they

are monitored continuously during the ma-

nufacturing process.

In order to guarantee the lifts function and

safety, only original parts from the manu-

facturer must be used. If any parts other

than those of the manufacturer are used,

or the product is modiﬁ ed in any way, the

user forfeits all warranty rights to claim.

VMB reserves the right to modify the pro-

duct speciﬁ cations without prior notice.

The model type, production year and se-

rial number must be quoted in any queries

or orders for spare parts.

2. TECHNICAL INFORMATION

2.1 - TE-034 Towerlift.

2.2 - Designed to lift loads, such as trus-

sing and lighting, vertically up to

different heights.

2.3 - Maximum load : 125 Kg (275 lb).

2.4 - Minimum load : 25 Kg (55 lb).

2.5 - Maximum height : 3.8 m (12.5’).

2.6 - Folded height : 1.26 m (4.1’).

2.7 - Area of base : 1.5 x 1.5 m

(4.9’ x 4.9’).

2.8 - Unit weight : 21 Kg (47 lb).

2.9. - Adaptator: Ø 35 mm

(PSU-034/PSU-06).

2.10 - Construction material : Steel proﬁ -

les DIN 2394.

2.11 - Three telescopic proﬁ le system ope-

rated by steel cable and guided by chan-

nelled steel pulleys with ball bearings.

2.12 - Winch: 450 Kg (990 lb). maximum

load with automatic brake. Certiﬁ cation

CE and

GS TÜV.

2.13 - Cable : Steel DIN 3060. Quality 180

Kg/mm

twist resistant.

Cable diameter : 4 mm.

Quick operation guide

ENGLISH

3. SAFETY PRECAUTIONS.

2.14 - Exclusive ALS system (Auto-Lock

Security), pat. pen. 200501056.hed in sa-

tin polyester.

2.15 - Legs with plastic end caps.

2.16 - Anchor of the support system of the

legs via safety catch and knob.

2.17 - Antirust protection, primed paint

with cured polyester dust cover. The tower

can be supplied with natural aluminium

ﬁ nish or black (version B).

2.18 - Extension bar (EX-034B) included,

attached to the leg by a magnet.

3.1 - The TE-034 is a machine designed to elevate

loads upwards in a vertical direction, It should NEVER

be used as a platform to elevate people.

3.2 - Only place the towerlift on hard and ﬂ at surfaces.

3.3 - The maximum load indicated on the characteristics

label and the instructions manual should not be excee-

ded.

3.4 - This lift should NEVER be used to elevate a load

that has not been properly checked. It is necessary to

verify that the load is correctly supported and centred

on the appropriate lift support so that the weight of the

load will only elevate in a vertical direction.

Quick operation guide

ENGLISH

3.5 - Verify that the tower is in a vertical position and

check that the support system (SA) is ﬁ xed by the safe-

ty catch pawl (R) and the retainer knob (K).

3.6 - NEVER use the lift on a vehicle or any other mobile

surface.

3.7 - If there is a possibility of strong winds or gusts,

place the lift on the ground ﬁ rmly and secure it with the

use of straps. NEVER attach a strap to a vehicle or any

other object that can possibly be moved.

3.8 - NEVER move the lift whilst it is carrying a load. It

is not advisable to carry out any type of horizontal mo-

vement even small positional adjustments.

3.9 - NEVER allow any team member below the load or

anybody else in the lifts operating zone.

3.10 - Take care with all obstacles above the lift and

its extension zone such as cornices, balconies, and

luminous signboards. It is very important to avoid the

presence of all types of cables below the extended lift.

Quick operation guide

ENGLISH

3.11 - Do not use stepladders on the lift or use it as a

support for them.

3.12 - Before using the lift, check the condition of the

cable. The cable should not have broken threads or

show any signs of crushed/ﬂ attened areas. NEVER use

faulty cables, always change them if there is any doubt.

Only use VMB steel cables; reference: DIN 3060.

Quality: 180KG/mm and torsion resistant.

3.13 - All sections must be lowered ﬁ rst, and the support

system (SA) must be locked with the catch pawl (R),

before transportation.

3.14 - Do not grease or lubricate the winch’s braking

mechanism. The brake disks have been greased with

a special heat and pressure resistant solution. Other

products should not be used to avoid negative effects

regarding the braking mechanism.

3.15 - The minimum load to avoid problems regarding

the braking mechanism is 25Kg. Without this load the

brake will not work.

3.16 - NEVER take apart the crank of the winch when

the lift is carrying a load or extended.

Quick operation guide

ENGLISH

4. USER INSTRUCTIONS.

4.1 - Place the lift on its working position,

in a ﬁ rm, ﬂ at surface. Remove the exten-

sible bar (EX-034B) from the leg.

4.2 - Firstly, untighten the screw (B) of the

bracket and put the extension bar (EX-

034B) in it, tighten the screw (B) again to

ﬁ x the bar. Then remove the safety catch

pawl (R) of the support system (SA) and

untighten the retainer knob (K). Lower the

support system (SA) until you can ﬁ x the

safety catch pawl (R) in the required posi-

tion, then tighten the knob (K).

4.3 - THE MAXIMUM LOAD IS 125 Kg

(275 lb). The lift should NEVER be over-

loaded (over 125 Kg). Safety at work is

the most important issue. Untighten the

steel bracket (B) and place the load onto

the lift using an adequate support accor-

ding to the need, use so that the weight

of the load will only elevate in a vertical

direction. The minimum load is 25 Kg.

4.4 - Elevation: Turn the winch crank

clockwise (N

) to lift the tower, the red

ALS lock enable the lift to rise and auto-

matically block the proﬁ les whilst rising,

ensuring that it will never fall.

4.5 - Blocking: Once the system is ele-

vated to its required height gently turn the

handle in a anti-clockwise (N

) direction to

introduce the ALS locks in its correspon-

ding hole and block the proﬁ les. The ALS

lock will take the pressure of the load and

release strain applied on the cable.

Security system ALS

The TE-034 incorporates the patented

security system ALS (Automatic Lock

Security). This VMB red trigger system

automatically blocks the tower in the posi-

tion it is left in. Each section of lift has an

ALS that blocks the section in the unlikely

event of the cable breaking.

4.6 - Lowering: To bring the lift down you

need to ﬁ rst turn the winch handle slightly

clockwise (N

) and at the same time pull

the red ALS lock out. This releases the

blocking systems. Then turn the handle

anti-clockwise (N

), whilst maintaining the

ALS lock pulled out until the proﬁ le has

been completely lowered. All red ALS

locks should be pulled out one by one

whilst the handle is turned anti-clockwise

and the proﬁ les are brought down, one by

one.

CAUTION

When two towers are used to elevate a

bridge, down truss or many towers to ele-

vate a structure of any type, it is almost

impossible that two or more people co-or-

3.17 - Only original replacement parts should be used.

ORIGINAL

Quick operation guide

ENGLISH

5.2 - The lift is supplied from the factory

completely greased. However, it is recom-

mended to periodically grease according

to use, the gearing, the axis bearings, the

spiral of the crank, and the sections.

5.3 - All lifts should undergo an annual

technical inspection carried out by an

authorized VMB dealer to check the cer-

tiﬁ cations and general condition of all the

lift’s elements and security systems invol-

ved in the lift’s use.

5.4 - Only use original spare parts to gua-

rantee a continued security level. The

user loses all rights to warranty if any spa-

re parts other than originals are used or

carries out any modiﬁ cation or alteration

to the towerlift.

5.5 - To request a spare part please in-

dicate the corresponding code which can

be found in this manual together with the

lift’s serial number and year of manufac-

ture.

6. GUARANTEE.

The warranty period for this lift is 2 years

from the date of purchase.

PRO LIFTS S.L. promises, that from the

date of purchase and during the warranty

period to resolve any faults that may oc-

cur, produced through defect material or

fabrication. Damage caused by improper

use, product modiﬁ cation, third party ma-

nipulation or accidental ﬁ re are not cove-

red by this warranty.

dinate the winches elevating or lowering

the loads, at exactly the same pace. At a

certain point each tower will be extended

to a height different to that of the others.

For this reason it is necessary that the

structure does not stretch and allows

for these differences. With a rigid ﬁ xa-

tion and if the level difference is signiﬁ -

cant, the force generated from the handle

of the winch will deform the structure and

apply a lateral force to the lifts causing

them to break and block.

4.7 - Transport:

For the transport of the tower is necessary

to fold the machine lowering every section

completely, then untighten the screw (B)

of the bracket and remove the extension

bar (EX-034). Once the towerlift is com-

pletely folded, unlock the catch pawl (R)

and untighten the retainer knob (K), then

rise and close the support system (SA) up

to its transport position, then ﬁ x the safety

catch pawl (R) and tighten the knob (K).

Attach the extension bar to the leg with

the magnet.

5. MAINTENANCE.

5.1 - Regularly check the state of the ca-

ble. If the cable has broken threads, or if

it shows any signs of crushed/ﬂ attened

areas, it should be changed and replaced

immediately with a new one. Do not use

the lift if the cables are in bad condition.

Only use VMB steel cables reference: DIN

3060 torsion resistant.

Page is loading ...

SPARE PARTS LIST / LISTA DE REPUESTOS TE-034

Code Description GB / USA Descripción ES

2021 Ø 40 Steel pulley Roldana de acero Ø 40

2022 Ø 50 Steel pulley Roldana de acero Ø 50

2023 M10 Special screw Tornillo especial M10

2024 Steel axe Ø 8 Eje de acero Ø 8

2025 Steel plate Pletina de acero

2026D Special hexagonal lock Gatillo hexagonal especial

2032 M6 Screw Tornillo M6

2035 Ø 40 Steel pulley Roldana de acero Ø 40

2036B Steel plate (B Black) Pletina de acero (B Negro)

2038 M10 Screw Tornillo M10

2039 M5 Screw Tornillo M5

2041 Steel plate Pletina de acero

2042B Steel bracket (B Black) Abrazadera de acero (B Negro)

2043 M10 Screw Tornillo M10

2044 M10 Autoblock nut Tuerca autoblocante M10

2047 M12 Washer Arandela M12

2049 M6 Screw Tornillo M6

2052 M8 Legs screw Tornillo patas M8

2053B Lower leg support (B Black) Soporte tirante (B Negro)

2056 M6 Washer Arandela M6

2065B Upper leg support (B Black) Soporte deslizante patas (B Negro)

2067B Leg without handle (B Black) Pata sin asa (B Negro)

2068B Leg support (B Black) Tirante patas (B Negro)

2069 M8 Leg screw Tornillo pata-tirante M8

2070 M8 Screw Tornillo tirante M8

2071 Plastic leg cap; ground Tapón de plástico suelo pata

2072 Plastic strap cap Tapón de plástico tirante

Code Description GB / USA Descripción ES

2073 Plastic cap top of the leg Tapón de plástico superior pata

2074 Nylon screw Knob Pomo con rosca de nylon

2082 TE-034 Steel cable Cable de acero TE-034

2090 M10 Flat washer Arandela M10 ﬁ na

2091B TE-034 Proﬁ le 1 Base (B Black) Tramo 1 Base TE-034 (B Negro)

2092B TE-034 Proﬁ le 2 (B Black) Tramo 2 TE-034 (B Negro)

2093B TE-034 Proﬁ le 3 (B Black) Tramo 3 TE-034 (B Negro)

2094B Leg with handle (B Black) Pata con asa (B Negro)

2152 M8 Washer Arandela M8

2209N ALS Lock Gatillo ALS

3232 M8 Allen screw Tornillo allen M8

3233 M6 Conic screw Tornillo cónico M6

6401 Cable end lock Prisionero ﬁ n de cable

6406 M4 Screw Tornillo M4

7061 M0 Flat washer Arandela plana M10

7078 M8 Autoblock nut Tuerca autoblocante M8

7160AC 450 Kg Winch Cabestrante 450 Kg

EX-034 Extension bar TE-034 Barra de extensión TE-034

Page is loading ...

PRO LIFTS S.L.

C/ Ciudad de Barcelona Nº19

Pol. Ind. Fuente del Jarro

46988 Paterna (Valencia) Spain

Tlf Export: +34 96 171 81 86

Tlf Nacional: 96 171 81 83

email: [email protected] web: www.prolifts.es

facebook / vmblifts

Canal VMBLifts

Para más información consulte con nuestros técnicos en:

For further information follow the advise of our technicians:

VMB TE-034 Profi Towerlift 125 kg schwarz User manual

Brand: VMB

Model: TE-034 Profi Towerlift 125 kg schwarz

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

español: VMB TE-034 Profi Towerlift 125 kg schwarz Manual de usuario

VMB TE-034 Profi Towerlift 125 kg schwarz User manual

This manual is also suitable for

VMB TE-034 Profi Towerlift 125 kg schwarz User manual

in other languages

Related papers

Other documents