Triarch 31630/2 User manual

Assembly Instructions

1. For mounting and wiring step please follow the mounting instruction sheet

enclosed.

2. Through the NIPPLE WITH NUT (B) to GLASS HOLD (C).Then place the

GLASS HOLD (C) onto the GLASS (A).

3. Place STEEL PLATE (D) onto the GLASS (A). Secured by the HEX NUT (E).

4. Place COVER (F) onto GLASS (A). Then locked by the BALL NUT (G).Please

see the FIGURE 1.

5. Insert the GLASS (A) onto the glass frame! See the FIGURE 2.

6. Place the BODY (K) onto the wall bracket! Make sure the HOLE (I) on the frame

matched the NIPPLE (H) on the wall bracket! Then secured by the SMALL BALL

NUT (J). See FIGURE 3.

7. Follow the wattage label on the socket cover and install correct wattage and type

bulb (no provide) onto the socket.

ITEM NO. 31630/2

GLASS (A)