CyberData Speaker 930095K User manual

VoIP Ceiling Speaker

Operations Guide

Part #010844

CyberData Corporation

2555 Garden Road

Monterey, CA 93940

(831) 373-2601

930095K

CyberData Corporation 930095K Operations Guide

PoE VoIP Speaker Operations Guide 930095K

Part # 010844

COPYRIGHT NOTICE:

This manual and related materials are the copyrighted property of CyberData Corporation. No part

of this manual or related materials may be reproduced or transmitted, in any form or by any means

(except for internal use by licensed customers), without prior express written permission of

CyberData Corporation. This manual, and the products, software, firmware, and/or hardware

described in this manual are the property of CyberData Corporation, provided under the terms of an

agreement between CyberData Corporation and recipient of this manual, and their use is subject to

that agreement and its terms.

DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by

CyberData Corporation, CyberData Corporation makes no representation or warranty, express or

implied, including any warranty or merchantability or fitness for any purpose, with respect to this

manual or the products, software, firmware, and/or hardware described herein, and CyberData

Corporation assumes no liability for damages or claims resulting from any use of this manual or

such products, software, firmware, and/or hardware. CyberData Corporation reserves the right to

make changes, without notice, to this manual and to any such product, software, firmware, and/or

hardware.

OPEN SOURCE STATEMENT: Certain software components included in CyberData products are

subject to the GNU General Public License (GPL) and Lesser GNU General Public License (LGPL)

“open source” or “free software” licenses. Some of this Open Source Software may be owned by

third parties. Open Source Software is not subject to the terms and conditions of the CyberData

COPYRIGHT NOTICE or software licenses. Your right to copy, modify, and distribute any Open

Source Software is determined by the terms of the GPL, LGPL, or third party, according to who

licenses that software.

Software or firmware developed by CyberData that is unrelated to Open Source Software is

copyrighted by CyberData, subject to the terms of CyberData licenses, and may not be copied,

modified, reverse-engineered, or otherwise altered without explicit written permission from

CyberData Corporation.

TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are

trademarks of CyberData Corporation. Other product names, trademarks, and service marks may be

the trademarks or registered trademarks of their respective owners.

Phone: (831) 373-2601

Technical Support Ext. 333

[email protected]

Fax: (831) 373-4193

Company and product information at www.cyberdata.net

CyberData Corporation 930095K Operations Guide

Revision History

Revision Date Released Description of Changes

E 11/08/2006 Adds Section 2.4, "Set up the MGROUPS".

F 1/22/2007 Adds info about the RTFM Announcement feature in Table 2-6

G 4/12/2007 Changes the Authenticate ID and password character limit from

30 to 25 in Table 2-7.

H 6/29/2007 Adds Figure 2, "Public Address System—Multicast" .

Adds more information about MGROUPS in Section 2.4, "Set

up the MGROUPS".

Adds information about the Outbound Proxy in Table 2-7.

I 10/9/2007 Adds the following safety information:

“Prior to installation, consult local building/electrical code

requirements.”

J 5/8/2008 Updates shipping weight and adds ambient operating

temperature information in Section 1.5, "Product

Specifications"

K 6/20/2008 Adds the following note to Appendix A, “Mounting the

Speaker”:

“For weak ceiling tile, CyberData offers a reinforcing mount

(CyberData part number 010991A).”

CyberData Corporation 930095K Operations Guide

i

Operations Guide 930095K CyberData Corporation

Contents

Chapter 1 Product Overview 1

1.1 Typical System Installation ...................................................................................................................1

1.2 Product Features ............................................................................................................

.........................3

1.3 Supported Protocols ..........................................................................................................

....................3

1.4 Supported SIP Servers .......................................................................................................

....................3

1.5 Product Specifications .......................................................................................................

....................4

Chapter 2 Installing the VoIP Ceiling Speaker 5

2.1 Parts List ..................................................................................................................................................5

2.2 Speaker Setup ..............................................................................................................

...........................6

2.2.1 Connect Power to the Speaker .............................................................................................

....6

2.2.2 Confirm that the Speaker is Oper

ational and Linked to the Network ...............................7

2.2.3 Confirm the IP Address, Test t

he Audio, and Check the Volume .......................................8

2.2.4 Adjust the Volume ........................................................................................................

..............9

2.3 Configure the Speaker Parameters ...........................................................................................

..........9

2.3.1 Log in to the Configuration Home Page ..................

..............................................................10

2.3.2 Configure the Network Parameters ......................................................................................12

2.3.3 Set up the Speaker .......................................................................................................

..............14

2.3.4 Configure the SIP Parameters ..............................................................................................

...15

2.4 Set up the MGROUPS ..........................................................................................................

................18

2.5 Upgrade the Firmware and Reboot the Speaker .............................................................................20

2.5.1 Reboot the Speaker ......................................................................................................

............22

2.6 Restore the Factory Default Settings ........................................................................................

.........23

Appendix A Mounting the Speaker 25

A.1 Mount the Speaker .............................................................................................................................25

Appendix B Setting up a TFTP Server 29

B.1 Set up a TFTP Server ...........................................................................................................................29

B.1.1 In a LINUX Environment ....................................................................................................

....29

B.1.2 In a Windows Environment .................................................................................................

..29

B.1.3 In a Solarwinds Server Environment ...................

.................................................................29

Appendix C Troubleshooting/Technical Support 31

C.1 Frequently Asked Questions (FAQ) .................................................................................................31

C.2 Documentation ...............................................................................................................

.....................31

C.3 Contact Information ..........................................................................................................

..................31

C.4 Warranty ....................................................................................................................

...........................32

Index 33

CyberData Corporation 930095K Operations Guide

ii

1

Operations Guide 930095K CyberData Corporation

1 Product Overview

The Voice-over-IP (VoIP) Ceiling Speaker uses a single cable to connect to existing LANs to

broadcast digital audio over your public address system. The small footprint and low height makes

this an ideal speaker to discreetly mount almost anywhere. Prior to installation, do the following:

● Create a plan for the locations of your loudspeaker amplifiers.

● Consult local building and electrical code requirements.

1.1 Typical System Installation

Figure 1 illustrates how the VoIP Ceiling Speakers are normally installed as part of a public address

system.

Figure 1. Public Address System

802.3af PoE compliant Hub

SIP Server

PoE VoIP Speakers

VoIP Phone

CyberData Corporation 930095K Operations Guide

Product Overview

Typical System Installation

2

Figure 2 illustrates how the VoIP Ceiling Speakers are can be installed as part of a multicast public

address system.

Figure 2. Public Address System—Multicast

Product Overview

Product Features

Operations Guide 930095K CyberData Corporation

3

1.2 Product Features

1.3 Supported Protocols

The IP Speaker supports:

● SIP

● Multicast

● HTTP Web-based configuration

Provides an intuitive user interface for easy system c

onfiguration and verification of speaker

operations.

● DHCP Client

Dynamically assigns IP addresses in addition to the option to use static addressing.

● TFTP Client

Facilitates Web-based firmware upgrades of the latest speaker capabilities.

● RTP

● RTP/AVP - Audio Video Profile

● Audio Encodings

PCMU (G.711 mu-law)

PCMA (G.711 A-law)

Packet Time 20 ms

1.4 Supported SIP Servers

The following link contains information on how to configure the speaker for the supported SIP

servers:

●

SIP compliant

●

Multicast support

●

Dual speeds of 10 Mbps and 100 Mbps

●

802.3af compliant

●

High efficiency speaker driver

●

Web-based configuration

●

External volume control

●

Small footprint

●

Web-based firmware upgrades

CyberData Corporation 930095K Operations Guide

Product Overview

Product Specifications

4

http://www.cyberdata.net/support/voip/ceilingspeaker.html

1.5 Product Specifications

Category Specification

Sensitivity 96dB/1W/1M S.P. Level

Output 8 Watts Peak Power

Port Baud Rate 10/100 Mbps

Power Requirement 802.3af compliant

Protocol SIP

Part Number 010844

Dimensions 9" x 2.4"

Weight

Ambient Operating Temperature

2.8 lbs./shipping weight of 3.8 lbs.

(1.3 kg/shipping weight of 1.7 kg)

32 to 122 degrees F

(0 to 50 degrees C)

5

Operations Guide 930095K CyberData Corporation

2 Installing the VoIP Ceiling Speaker

2.1 Parts List

Table 2-1 illustrates the parts for each speaker and includes kits for the drop ceiling and drywall

mounting.

Note The Template for

Speaker and Screw Holes is located on the last page of the Installation Quick

Reference Guide that is included in the packaging with each speaker.

Table 2-1. Parts List

Quantity Part Name Illustration

1 Speaker Assembly

1 Installation Quick Reference Guide

1 Speaker Mounting Accessory Kit

(Part #070054A)

CyberData Corporation 930095K Operations Guide

Installing the VoIP Ceiling Speaker

Speaker Setup

6

2.2 Speaker Setup

Set up and configure each speaker before you mount it.

CyberData delivers each speaker with the following factory default values:

2.2.1 Connect Power to the Speaker

Figure 2-1 and Figure 2-2 illustrates how to connect the VoIP Ceiling Speaker to a 802.3af compliant

ethernet hub (Figure 2-1) or a PoE Injector (Figure 2-2) via a Cat 5 Ethernet Connector.

Note If

a 802.3af compliant ethernet hub is not available, you will need a PoE Injector, part

#010867A (ordered separately). A PoE Injector is a power supply solution for those who

have a standard hub.

Table 2-2. Factory Default Settings—Default of SIP

Parameter Factory Default Setting

SIP/MGROUPS SIP

IP Addressing static

IP Address 192.168.3.10

Web Access Username admin

Web Access Password admin

Subnet Mask 255.255.255.0

Default Gateway 192.168.3.1

Figure 2-1. 802.3af Compliant Ethernet Hub

Figure 2-2. PoE Injector

PoE Injector (Part #010867A)

Non PoE Hub

Installing the VoIP Ceiling Speaker

Speaker Setup

Operations Guide 930095K CyberData Corporation

7

2.2.2 Confirm that the Speaker is Operational and Linked to the Network

After connecting the speaker to the 802.3af compliant ethernet hub, the LEDs on the speaker face

confirm that the speaker is operational and linked to the network.

Figure 2-3. Status and Activity LEDs

2.2.2.1 Status LED

After supplying power to the speaker:

1. The green St

atus LED illuminates after approximately five seconds to indicate the start of the

firmware verification and load process.

2. After approximately 15 seconds, the Stat

us LED begins to blink at one second intervals to

indicate the start of the firmware boot process.

3. After approximately 35 seconds, the speaker beeps once to

indicate that it is operational.

4. The St

atus LED will continue to blink at one second intervals to indicate normal operation.

2.2.2.2 Link LED

● The Link LED is illuminated when the network link to the speaker is established.

● The Link LED blinks to indicate network traffic.

Speaker

Status

(Green)

Network

Link/Activity

(Yellow)

CyberData Corporation 930095K Operations Guide

Installing the VoIP Ceiling Speaker

Speaker Setup

8

2.2.3 Confirm the IP Address, Test the Audio, and Check the Volume

When the speaker is operational and linked to the network, use the Reset Test Function

Management (RTFM) switch (Figure 2-4) on the speaker face to announce and confirm the speaker’s

IP Address, test that the audio is working, and

check the volume.

Figure 2-4. RTFM Switch

To announce a speaker’s current IP address:

1. Press and hold the RT

FM switch until it beeps (after one second).

2. Release the switch to hear the IP address

announcement, and check the speaker volume.

Note The spea

ker will announce it's default IP address (192.168.3.10).

CAUTION Pressing and

holding the RTFM switch for longer than 20 seconds will restore the

speaker to the factory default settings. See Section 2.6, "Restore the Factory Default

Settings".

RTFM switch

Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

Operations Guide 930095K CyberData Corporation

9

2.2.4 Adjust the Volume

To adjust the speaker volume, turn the Vo l um e dial (Figure 2-5) on the speaker face.

Figure 2-5. Volume Control

2.3 Configure the Speaker Parameters

To configure the speaker online, use a standard web browser.

Configure each speaker and verify its operation befor

e you mount it. When you are ready to mount a

speaker, refer to

Chapter A, “Mounting the Speaker” for instructions.

All speakers are initially configured with the following default IP settings:

When configuring more than one speaker, attach the speakers to the network and configure one at a

time

to avoid IP address conflicts.

Volume control

Table 2-3. Factory Default Settings

Parameter Factory Default Setting

SIP/MGROUPS SIP

IP Addressing static

IP Address 192.168.3.10

CyberData Corporation 930095K Operations Guide

Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

10

2.3.1 Log in to the Configuration Home Page

1. Open your browser to the speaker IP address.

For the initial configuration of the speaker, open

your browser to the default IP address:

http://192.168.3.10

Note Make sure that the PC

is on the same IP network as the speaker.

2. When prompted, use the following default W

eb Access Username and Web Access Password

to access the Home Page (Figure 2-6):

Web Access Username: admin

Web Access Password: ad

min

Figure 2-6. Home Page

Web Access Username admin

Web Access Password admin

Subnet Mask 255.255.255.0

Default Gateway 192.168.3.1

Table 2-3. Factory Default Settings

Parameter Factory Default Setting

SIP

Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

Operations Guide 930095K CyberData Corporation

11

3. On the Home Page, review the setup details and navigation buttons described in Table 2-4.

Table 2-4. Home Page Overview

Web Page Item Description

Device Name Shows the device name.

Running Shows the current speaker function.

Serial # Device serial number.

Ethernet Address Device ethernet address.

IP Addressing Shows the current IP addressing setting (DHCP or static).

IP Address Shows the current IP address.

Subnet Mask Shows the current subnet mask address.

Default Gateway Shows the current default gateway address.

Link to the Speaker Setup web page.

Link to the Network Setup web page.

Link to the SIP Setup web page.

Link to the MGROUPS Setup page.

Link to the Upgrade Firmware web page.

CyberData Corporation 930095K Operations Guide

Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

12

2.3.2 Configure the Network Parameters

1. Click the Network Setup button to open the Network Setup page (Figure 2-7).

Figure 2-7. Network Setup Page

2. On the Networ

k Setup page, enter values for the parameters indicated in Table 2-5.

Table 2-5. Network Setup Parameters

Web Page Item Description

IP Addressing* Select either DHCP IP Addressing or Static IP Addressing by

marking the appropriate radio button. If you select Static, configure

the remaining parameters indicated in

Table 2-5. If you select DHCP,

go to Step 3.

IP Address* Enter the Static IP address.

Subnet Mask Enter the Subnet Mask address.

Default Gateway Enter the Default Gateway address.

DNS Server 1* Enter the DNS Server 1 address.

DNS Server 2* Enter the DNS Server 2 address.

Click this button to save your configuration settings. Changing a

parameter that has an asterisk next to it will cause a system reboot

when saved.

Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

Operations Guide 930095K CyberData Corporation

13

3. After changing the parameters, click Save Settings. This updates the changed parameters and

reboots the speaker if appropriate.

4. Connect the speaker to the target network.

5. From a system on the same network as the speaker

, open a browser with the new IP address of

the speaker.

Link to the Speaker Setup page.

Link to the SIP Setup page.

Link to the MGROUPS Setup page.

Link to the Upgrade Firmware page.

Link to the Home page.

Table 2-5. Network Setup Parameters

Web Page Item Description

CyberData Corporation 930095K Operations Guide

Installing the VoIP Ceiling Speaker

Configure the Speaker Parameters

14

2.3.3 Set up the Speaker

1. Click the Speaker Setup button to open the Speaker Setup page. See Figure 2-8.

Figure 2-8. Speaker Setup

2. On the Speaker Se

tup page, enter values for the parameters indicated in Table 2-6.

Table 2-6. Speaker Setup Parameters

Web Page Item Description

Device Name Enter a descriptive name for this device (if desired).

Select Speaker Function Select SIP or MGROUPS.

Change Web Access Username Use this field to change the Web Access Username

Change Web Access Password Use this field to change the Web Access Password

Re-enter New Password Use this field to re-enter a new password

Speaker Tone Before Paging Enable/Disable the speaker tone (beep) before each page.

Speaker Tone After Initialization Enable/Disable the speaker tone (beep)

after the system

startup.

Page is loading ...

CyberData Speaker 930095K User manual

This manual is also suitable for

CyberData Speaker 930095K User manual

Related papers

Other documents