ESAB LTF 150 is a thyristor-controlled constant current rectifier for TIG (DC) and metal arc welding with a control range between 5 and 150 A. The device is fan-cooled (continuous cooling) and incorporates thermostats for protection against overloading. The LTF 150 is phase-independent and compensated against 10% variations in the mains voltage. In addition, the LTF 150 incorporates a SLOPE DOWN function which can be set to between 0 and 5 seconds. Gas post-flow time is 10 seconds. The device is suitable for welding various materials, including steel, stainless steel, and aluminum.
ESAB LTF 150 is a thyristor-controlled constant current rectifier for TIG (DC) and metal arc welding with a control range between 5 and 150 A. The device is fan-cooled (continuous cooling) and incorporates thermostats for protection against overloading. The LTF 150 is phase-independent and compensated against 10% variations in the mains voltage. In addition, the LTF 150 incorporates a SLOPE DOWN function which can be set to between 0 and 5 seconds. Gas post-flow time is 10 seconds. The device is suitable for welding various materials, including steel, stainless steel, and aluminum.
ESAB LTF 150 is a thyristor-controlled constant current rectifier for TIG (DC) and metal arc welding with a control range between 5 and 150 A. The device is fan-cooled (continuous cooling) and incorporates thermostats for protection against overloading. The LTF 150 is phase-independent and compensated against 10% variations in the mains voltage. In addition, the LTF 150 incorporates a SLOPE DOWN function which can be set to between 0 and 5 seconds. Gas post-flow time is 10 seconds. The device is suitable for welding various materials, including steel, stainless steel, and aluminum.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI