Tripp Lite N252-024-SH-K Installation guide

Tripp Lite
Brand
Tripp Lite
Model
N252-024-SH-K
Type
Installation guide

Tripp Lite N252-024-SH-K is a 1U patch panel designed for organizing and managing network cables in a structured cabling system. It features 24 Krone IDC ports with a Cat6 rating, enabling high-speed data transmission of up to 1 Gigabit per second. The STP (Shielded Twisted Pair) construction provides enhanced protection against electromagnetic interference, ensuring reliable network performance. This panel is suitable for use in various networking applications, including data centers, offices, and home networks.

Tripp Lite N252-024-SH-K is a 1U patch panel designed for organizing and managing network cables in a structured cabling system. It features 24 Krone IDC ports with a Cat6 rating, enabling high-speed data transmission of up to 1 Gigabit per second. The STP (Shielded Twisted Pair) construction provides enhanced protection against electromagnetic interference, ensuring reliable network performance. This panel is suitable for use in various networking applications, including data centers, offices, and home networks.

1
Installation Guide
24-Port Cat6 Krone IDC STP
1U Patch Panel
Model: N252-024-SH-K
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Español 9 • Français 17 • Русский 25
18-10-101-9338C7.indb 1 11/28/2018 6:39:09 PM
2
Installation
1
Prepare Cables.
S/FTP Cable
F/FTP Cable
50 mm
50 mm
Remove approximately
50 mm of cable sheath.
Roll the exposed braid back
along the cable sheath.
Remove approximately
50 mm of cable sheath.
Roll the exposed foil back
along the cable sheath.
Where a foil screen is present,
remove approximately 2 mm of
the exposed length.
Where a foil screen is present,
remove approximately 2 mm of
the exposed length.
Separate the
conductors.
Wrap the drain wire at least
twice around the foil. Separate
the conductors.
50 mm
50 mm
2 mm
2 mm
Drain
Wire
18-10-101-9338C7.indb 2 11/28/2018 6:39:10 PM
3
Installation
2
Seat each wire into the IDC slots according to
the color scheme map. Punch down with a proper
impact tool.
Drain Wire
18-10-101-9338C7.indb 3 11/28/2018 6:39:12 PM
4
Installation
3
Make sure the drain wire has good contact with the
rear panel.
Drain Wire
18-10-101-9338C7.indb 4 11/28/2018 6:39:13 PM
5
Installation
4
Use nylon cable ties to secure the bulk cables to
the cable manager.
Cut off all excess straps.
Note: Do not over-tighten the cables.
18-10-101-9338C7.indb 5 11/28/2018 6:39:14 PM
6
Installation
5
Attach the patch panel to a rack or cabinet.
18-10-101-9338C7.indb 6 11/28/2018 6:39:15 PM
7
Installation
6
Attach the panel’s grounding bond to the rack or
cabinet.
Grounding Bond
Notes:
• When terminating cables onto the patch panel, set your impact tool to low impact.
• Do not insert RJ11 6P plug.
18-10-101-9338C7.indb 7 11/28/2018 6:39:16 PM
8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Warranty and Product Registration
Lifetime Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship for
life. Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized
Tripp Lite service center. Products must be returned to Tripp Lite or an authorized
Tripp Lite service center with transportation charges prepaid and must be accompanied
by a brief description of the problem encountered and proof of date and place of
purchase. This warranty does not apply to equipment, which has been damaged by
accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue,
loss of equipment, loss of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change
without notice.
18-10-101-9338C7.indb 8 11/28/2018 6:39:16 PM
9
Guía de Instalación
Panel de Conexiones de 1U
de 24 Puertos Cat6 Krone
IDC STP
Modelo: N252-024-SH-K
1111 W. 35th Street, Chicago, IL 60609 EE UU • www.tripplite.com/support
Copyright © 2018 Tripp Lite. Todos los derechos reservados.
English 1 • Français 17 • Русский 25
18-10-101-9338C7.indb 9 11/28/2018 6:39:16 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
17
Guide d'installation
Panneau de câblage STP 1U
Krone IDC Cat6 à 24 ports
Modèle : N252-024-SH-K
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Droits d'auteur © 2018 Tripp Lite. Tous droits réservés.
English 1 • Español 9 • Русский 25
18-10-101-9338C7.indb 17 11/28/2018 6:39:21 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Tripp Lite N252-024-SH-K Installation guide

Tripp Lite
Brand
Tripp Lite
Model
N252-024-SH-K
Type
Installation guide

Tripp Lite N252-024-SH-K is a 1U patch panel designed for organizing and managing network cables in a structured cabling system. It features 24 Krone IDC ports with a Cat6 rating, enabling high-speed data transmission of up to 1 Gigabit per second. The STP (Shielded Twisted Pair) construction provides enhanced protection against electromagnetic interference, ensuring reliable network performance. This panel is suitable for use in various networking applications, including data centers, offices, and home networks.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents