Aaeon EMB-APL1 User manual

Brand: Aaeon

Model: EMB-APL1

Category: Motherboards

Type: User manual

EMB-APL1

Industrial Motherboard

E15335

Revised Edition V3

March 2019

This document is copyrighted, 2019. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject

to change without notice. While reasonable efforts have been made in the

preparation of this document to assure its accuracy, the original manufacturer

assumes no liabilities resulting from errors or omissions in this document, or from

the use of the information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

, Core™ are trademarks of Intel

Corporation.

• Microsoft Windows

is a registered trademark of Microsoft Corp.

• ITE is a trademark of Integrated Technology Express, Inc.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

Contents

Chapter 1: Product overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specications ............................................................................... 1-2

Chapter 2: Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-5

2.3.1 Component side .............................................................. 2-5

2.3.2 Solder side ...................................................................... 2-6

2.4 Central Processing Unit (CPU) ................................................... 2-7

2.5 System memory ........................................................................... 2-7

2.6 Jumpers ........................................................................................ 2-8

2.7 Connectors ................................................................................. 2-11

2.7.1 Rear panel connectors .................................................. 2-11

2.7.2 Internal connectors ....................................................... 2-12

Chapter 3: BIOS setup

3.1 BIOS setup .................................................................................... 3-1

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-2

3.3.1 Trusted Computing ......................................................... 3-2

3.3.2 CPUConguration .......................................................... 3-3

3.3.3 SATAConguration ........................................................ 3-3

3.3.4 USBConguration .......................................................... 3-4

3.3.5 Hardware Monitor ........................................................... 3-4

3.3.6 SIOConguration ........................................................... 3-7

3.3.7 Power Management ........................................................ 3-8

3.3.8 DigitalIOPortConguration ........................................... 3-8

3.4 Chipset menu ............................................................................... 3-9

3.4.1 North Bridge .................................................................... 3-9

3.5 Security menu ............................................................................ 3-10

iii

3.5.1 Administrator Password ................................................ 3-10

3.5.2 User Password .............................................................. 3-10

3.6 Boot menu .................................................................................. 3-11

3.6.1 BootConguration ........................................................ 3-11

3.6.2 Boot Option Priorities .................................................... 3-11

3.7 Save & Exit menu ....................................................................... 3-11

Appendix

Notices .......................................................................................................A-1

Contents

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

1 x SATA cable

1 x SATA power cable

1 x I/O shield

1 x Support DVD

NOTE: If any of the above items are damaged or missing, contact your

distributor or sales representative immediately.

1.2 Features

• Integrated Intel

Apollo Lake Processor N4200 / N3350 / E3930

• Two DDR3L 1333/1600/1867MTS SO-DIMM up to 8GB

• Realtek

ALC3236-CG6-ChannelHighDenitionAudioCODEC

• 3 independent display: HDMI, LVDS(or eDP), and VGA

• Dual Ethernet LAN: Realtek

8111G PCIe Gb LAN x 2

• SATA 6.0 Gb/s x 2 (One colay with M.2 M Key), USB2.0 x 5, USB3.0 x 2,

COM x 6

• 1 x PCIe 2.0 [x1], 1 x M.2 M key (22 x 42mm) for SATA, and 1 x M.2 E Key (22

x 30mm) for PCIe

Chapter 1

Product overview

1-1

Chapter 1: General information

1.3 Specications

SYSTEM

CPU

N4200, (4C @ 2.50GHz CPU [Burst Mode], 750MHz GFX [Turbo], ~6W

TDP)

N3350, (2C @ 2.40GHz CPU [Burst Mode], 650MHz GFX [Turbo], ~6W

TDP)

E3930, (2C @ 1.80GHz CPU [Burst Mode], 550MHz GFX [Turbo], ~6.5W

TDP)

Memory

2 x SO-DIMM, max. 8GB, DDR3L 1333/1600/1867MTS, non-ECC, un-

buffered memory,

Graphics

Intel

HD Graphics

I/O Chipset

NCT6116D

LAN

2 x Realtek

8111G PCIe Gb LAN

Audio

Realtek

ALC3236-CG

TPM

Nuvoton NPCT652ABCYX TPM2.0 onboard (optional)

Expansion slots

1 x PCIe 2.0 [x1]

1 x M.2 M key (22 x 42mm) for SATA

1 x M.2 E Key (22 x 30mm) for PCIe

BIOS

128Mb Flash ROM, AMI BIOS

H/W Status Monitor

Monitors CPU/system temperature

Monitors Vcore, 3.3V/5V/12V voltages

Monitors chassis fan speed

Watchdog Timer

1~255 steps by software program

Smart Fan Control

Chassis fan (fanless)

Wake On LAN / PXE

Yes ( WOL, PXE)

Power States

S3, S4, S5

Graphics

Graphics Chipset

Intel

HD Graphics

Graphics Multi

Display

3 independent display

VGA

Up to 1920 x 1200 @ 60 Hz

HDMI

Up to 3840 x 2160 @ 30Hz

eDP

Up to 4096 x 2160 @60Hz

LVDS

Up to 1920 x 1200 @60Hz, Daul Channel 18/24 bit (via PS8625)

Backlight Control

Voltage / PWM, use HW control

Environment, Power, and ME

Battery

Lithium battery

Power requirement

12V~24V wide-range voltage input, DC jack (5.5/2.5mm) at the back panel

4-pin internal power connector

Operating

temperature

F~140

F (0

C~60

Operating humidity

0%~90% relative humidity, non-condensing

Certicate

CE & FCC Class A

Form factor

Mini-ITX form factor:

6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

Weight

1.1 lb (0.5 Kg)

(continued on the next page)

EMB-APL1

1-2

I/O

Storage

2 x SATA 6Gb/s (1 colay with M.2) (default: 1 x SATA + M.2)

1 x SATA power connector (5V / 12V @1A)

USB

2 x USB 3.0 ports (at the back panel)

5 x USB 2.0 ports (2 at the back panel, 3 at the mid-board)

Display I/O

1 x VGA, 1 x HDMI, 1 x eDP (colay with LVDS)

Audio I/O

Mic-In, Line-Out

LAN I/O

2 x RJ-45 ports on rear I/O

Serial ports

5 x RS-232

1 x RS-232/422/485 supports 5V/12V/RI option (COM1)

DIO

8-bit Digital I/O interface (4-in / 4-out)

Fan

1 x Chassis fan connector (4-pin)

I/O Placement

Back panel I/O ports

(Lowprole)

1 x 12V~24V wide-range voltage input DC jack (5.5/2.5mm)

2 x USB 3.0 ports

2 x USB 2.0 ports

1 x HDMI port (vertical type)

1 x VGA port

2 x LAN (RJ-45) ports

1 x Audio jack (Line-Out), green

1 x Audio jack (Mic-in), pink

Internal I/O

connectors

1 x M.2 M key (22 x 42mm) for SATA

1 x M.2 E key (22 x 30mm) for PCIe

1 x P/S2 header

2 x SATA 6.0 Gb/s connectors (1 colay with M.2)

1 x SATA power connector

1 x USB 2.0 header supports additional 2 USB ports (2 x 5PIN, p=2.00mm)

1 x USB 2.0 header supports additional 1 USB port (2 x 5PIN, p=2.00mm)

1 x Chassis fan connector

1 x Chassis intrusion jumper

5 x boxer headers for COM (RS-232)

1 x boxer header for COM (RS-232 / 422 / 485)

1 x Digital I/O connector (4-in / 4-out)

1 x 40-pin LVDS / eDP connector (colay; default eDP) (LVDS via PS8625)

1 x LVDS 3V / 5V selection jumper

1 x LCD DC / PWM mode selection jumper

1 x LCD backlight connector (inverter)

1 x LCD backlight 12V / 5V jumper

1 x Battery horizontal socket

1 x 2*2 PIN DCIN AUX power connector

1 x System panel connector

1 x AT/ATX mode selection jumper

1 x CMOS jumper

1 x PCIe 2.0 [x1] slot

(continued on the next page)

1-3

Chapter 1: General information

Others

Supported OS

Windows

10 64-bit

Ubuntu16.04.02 / Kernel4.8.0

Accessories

1 x SATA cable

1 x SATA power cable

1 x I/O shield

1 x Support DVD

NOTE: Specicationsaresubjecttochangewithoutnotice.

EMB-APL1

1-4

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

groundedobjectorametalobject,suchasthepowersupplycase,toavoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethatthepowersupply

is switched off or the power cord is detached from the power supply. Failure

todosomaycauseseveredamagetothemotherboard,peripherals,or

components.

2-1

Chapter 2: Motherboard information

2.2 Motherboard layout

Place this side towards the rear of

the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION!Donotovertightenthescrews!Doingsocandamagethe

motherboard.

EMB-APL1

DC_PWR2

DC_PWR1

HDMI1

VGA1

USB2

USB1

LAN1_CON1

LAN2_CON1

LINE-OUT1

MIC-IN1

CLRTC1CHASSIS1 ATX_AT1

17.0cm(6.7in)

F_PANEL1

SATA6G_2 SATA6G_1

PCIEX1

SYS_FAN1

COM1

COM2

COM3

COM4 COM5

COM6

DDR3 SO-DIMM_B1 (64bit, 204-pin module)

DDR3 SO-DIMM_A1 (64bit, 204-pin module)

LVDS_PWR

BKL_PWR

DIO1

USB2_P2USB2_P1

LVDS1

EDP1(BOTTOM)

INV1

SATA_PWR1

KBMS1

ALC

3236

TPS

51220ARTVR

SPI1

Intel

Apollo Lake

Super

I/O

BZ1

128Mb

BIOS

M2E1

M2M1

BATTERY1

64 52 31

202122 15161718 1419

EMB-APL1

2-2

EMB-APL1

EDP1

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots/LEDs Page

1. DCINAUXpowerconnector(4-pinDC_PWR2) 2-13

2. DDR3LSO-DIMMslots 2-7

3. Chassisfanconnector(4-pinSYS_FAN1) 2-12

4. LVDSpanelvoltageselectionjumper(3-pinLVDS_PWR) 2-8

5. Invertervoltageselectionjumper(3-pinBKL_PWR) 2-9

6. Inverterbacklightcontrolmodeselectionjumper(3-pinJ3) 2-9

7. Backlightinverterpowerconnector(8-pinINV1) 2-17

8. LVDSconnector(40-pinLVDS1) 2-15

9. M.2EKeyandMKeyslots 2-16

10. IntegratedIntel

ApolloLakeprocessorN4200/N3350/E3930 2-7

11. SerialATA6.0Gb/sconnectors(7-pinSATA6G_1~2) 2-14

12. SATApowerconnector(4-pinSATA_PWR1) 2-17

13. Systempanelconnector(10-1pinF_PANEL1) 2-13

14. AT/ATXmodeselection(3-pinATX_AT1) 2-10

15. ClearRTCRAM(3-pinCLRTC1) 2-8

16. PS/2keyboard/mouseconnector(6-pinKBMS1) 2-17

17. Chassisintrusionjumper(4-1pinCHASSIS1) 2-10

18. DigitalI/Oconnector(10-pinDIO1) 2-16

19. USB2.0connectors(10-pinUSB2_P1,USB2_P2) 2-14

20. Serialportconnectors(10-pinCOM1~6) 2-18

21. Batteryconnector(2-pinBATTERY1) 2-19

22. SPIprogrammingconnector(8-pinSPI1) 2-15

23. EmbeddedDisplayPort(Bottom,40-pinEDP1) 2-12

EMB-APL1

2-4

2.3 Screw size

2.3.1 Component side

7.59

20.09

47.06

65.09

82.09

108.10

127.11

137.09

150.09

166.24

170.18

161.01

17.36

32.26

45.50

119.89

166.01

165.90

165.85

164.61

165.86

3.43

6.73

5.72

28.59

34.18

58.28

63.26

35.66

86.35

99.93

76.87

117.28

139.40

125.95

153.92

0.00

11.10

9.25

5.93

10.49

11.84

16.04

2.10

21.82

30.08

45.45

74.26

89.18

53.41

61.60

128.40

132.08

145.07

96.05

152.05

161.54

147.25

137.25

157.25

159.16

0.00

91.76

105.47

102.09

109.85

119.19

119.12

130.84

140.34

149.73

166.85

164.47

164.97

137.25

147.25

157.25

170.18

7.59

42.59

68.59

85.59

20.05

102.39

121.39

137.09

150.09

170.18

0.00

(Ref)22.07

0.50

85.69

84.20

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

170.18

6.35

163.83

59.50

110.50

6.35

36.46

60.56

163.83

10.16

33.02

70.85

121.85

165.10

170.18

165.10

0.00

159.13

EMB-APL1

2-6

2.4 Central Processing Unit (CPU)

ThemotherboardcomeswithanintegratedIntel

ApolloLakeprocessorN4200/

N3350/E3930.

2.5 System memory

ThismotherboardcomeswithtwoDoubleDataRate3LowVoltage(DDR3L)

SmallOutlineDualInlineMemoryModules(SO-DIMM)sockets.Thegure

illustratesthelocationoftheDDR3LDIMMsockets:

Installing a DIMM

To install a DIMM To remove a DIMM

EMB-APL1

EMB-APL1 CPU

Intel

Apollo Lake

EMB-APL1

EMB-APL1 204-pin

DDR3 So-DIMM sockets

DIMM_B1

DIMM_A1

2-7

Chapter 2: Motherboard information

2.6 Jumpers

1. Clear RTC RAM (3-pin CLRTC1)

ThisjumperallowsyoutocleartheRealTimeClock(RTC)RAMin

CMOS.YoucancleartheCMOSmemoryofdate,time,andsystemsetup

parametersbyerasingtheCMOSRTCRAMdata.Theonboardbutton

cellbatterypowerstheRAMdatainCMOS,whichincludesystemsetup

information such as system passwords.

To erase the RTC RAM:

1. TurnOFFthecomputerandunplugthepowercord.

2. Movethejumpercapfrompins1-2(default)topins2-3.Keepthecapon

pins2-3forabout5~10seconds,thenmovethecapbacktopins1-2.

3. PlugthepowercordandturnONthecomputer.

4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetup

to reenter data.

CAUTION!ExceptwhenclearingtheRTCRAM,neverremovethecapon

CLRTCjumperdefaultposition.Removingthecapwillcausesystemboot

failure!

NOTE:Ifthestepsabovedonothelp,removetheonboardbatteryandmove

thejumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,

reinstall the battery.

2. LVDS panel voltage selection jumper (3-pin LVDS_PWR)

Pins

+5V 1-2

+3V(Default) 2-3

EMB-APL1

EMB-APL1 Clear RTC RAM

1 2

2 3

Protected

(Default)

Clear CMOS

CLRTC1

EMB-APL1

EMB-APL1 LVDS panel voltage selection

1 2

2 3

+3V

(Default)

+5V

LVDS_PWR

EMB-APL1

2-8

3. Inverter voltage selection jumper (3-pin BKL_PWR)

Pins

+12V 1-2

+5V(Default) 2-3

4. Inverter backlight control mode selection jumper (3-pin J3)

Pins

DCmode(Default) 1-2

PWMmode 2-3

EMB-APL1

EMB-APL1 Inverter voltage selection

1 2

2 3

+5V

(Default)

+12V

BKL_PWR

EMB-APL1

EMB-APL1 Inverter backlight

control mode selection

PWM mode

DC mode

(Default)

1 2

2 3

2-9

Chapter 2: Motherboard information

Pins

1-2 Enablesthechassisintrusiondetectionfeature.

3-4 Disables the chassis intrusion detection feature

(Default).

6. Chassis intrusion jumper (4-1 pin CHASSIS1)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Connectoneendofthechassisintrusionsensororswitchcabletothis

connector.Thechassisintrusionsensororswitchsendsahigh-levelsignalto

thisconnectorwhenachassiscomponentisremovedorreplaced.Thesignal

isthengeneratedasachassisintrusionevent.

Movethejumpercaptopins1-2whenyouintendtousethechassisintrusion

detection feature.

5. AT/ATX mode selection jumper (3-pin ATX_AT1)

Pins

ATXmode(Default) 1-2

ATmode 2-3

EMB-APL1

EMB-APL1 AT/ATX mode selection

ATX_AT1

AT mode

ATX mode

(Default)

1 2

2 3

EMB-APL1

EMB-APL1 Chassis intrusion connector

No Intrudor

Intrudor

PIN1

CHASSIS

EMB-APL1

2-10

7. Microphone port (pink). This port connects to a microphone.

8. Line Out port (lime). Thisportconnectstoaheadphoneoraspeaker.Inthe

4-channeland6-channelcongurations,thefunctionofthisportbecomes

FrontSpeakerOut.

2.7 Connectors

2.7.1 Rear panel connectors

LAN port

Speed

LED

Activity

Link LED

ACT/LINK LED SPEED LED

Status Description Status Description

OFF Nolink OFF 10Mbpsconnection

GREEN Linked ORANGE 100Mbpsconnection

BLINKING Dataactivity GREEN 1Gbpsconnection

1. DC power port.ThisportconnectstoaDCpoweradapter.

2. HDMI port.ThisportisforaHigh-DenitionMultimediaInterface(HDMI)

connector,andisHDCPcompliantallowingplaybackofHDDVD,Blu-Ray,

and other protected content.

3. Video Graphics Adapter (VGA) port.This15-pinportisforaVGAmonitor

orotherVGA-compatibledevices.

4. USB 3.0 ports.These9-pinUniversalSerialBus(USB)portsconnectto

USB3.0/2.0devices.

NOTES:

• DONOTconnectakeyboard/mousetoanyUSB3.0portwheninstalling

Windows

operating system.

• DuetoUSB3.0controllerlimitation,USB3.0devicescanonlybeused

underWindows

OSenvironmentandaftertheUSB3.0driverinstallation.

• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0

portsforfasterandbetterperformanceforyourUSB3.0devices.

5. USB 2.0 ports.Thesetwo4-pinUniversalSerialBus(USB)portsare

availableforconnectingUSB2.0/1.1devices.

6. LAN (RJ-45) ports.TheseportsallowGigabitconnectiontoaLocalArea

Network(LAN)throughanetworkhub.RefertothetablebelowfortheLAN

portLEDindications.

LAN port LED indications

7531 82 4 6

2-11

Chapter 2: Motherboard information

2.7.2 Internal connectors

CAUTION: DONOTforgettoconnectthefancabletothefanconnector.

Insufcientairowinsidethesystemmaydamagethemotherboard

components.Thisisnotajumper!DONOTplaceajumpercaponthefan

connector.

1. Chassis fan connector (4-pin SYS_FAN1)

Connectthefancabletothefanconnectoronthemotherboard,ensuring

that the black wire of each cable matches the ground pin of the connector.

2. Embedded DisplayPort (40-pin EDP1)

This connector is for an internal embedded DisplayPort connection.

EMB-APL1

EMB-APL1 Fan connector

SYS_FAN1

+5V

FANIN

CHAFANPWR

GND

PIN 1

EMB-APL1

EMB-APL1 Embedded DisplayPort

EDP1(Bottom)

PIN 1

+V_PANEL

GND

eDP_HPD_RRR

GND

BKLTEN_R

BKLTCTL_R

+BLVCC

GND

eDP_TXN3_C

eDP_TXP3_C

GND

eDP_TXN2_C

eDP_TXP2_C

GND

eDP_TXN1_C

eDP_TXP1_C

GND

eDP_TXN0_C

eDP_TXP0_C

GND

eDP_AUXP_C

eDP_AUXN_C

GND

+V_PANEL

PIN 40

EMB-APL1

2-12

Page is loading ...

Aaeon EMB-APL1 User manual

Brand: Aaeon

Model: EMB-APL1

Category: Motherboards

Type: User manual

Download PDF

report

Aaeon EMB-APL1 User manual

Aaeon EMB-APL1 User manual

Related papers

Other documents