Gigabyte GA-945GZMT-S2-DB User manual

GA-945GZM-S2 (rev. 2.1)

Intel

®

Core

TM

2 Extreme dual-core / Core

TM

2 Duo /

Intel

®

Pentium

®

D / Pentium

®

4 / Celeron

®

D LGA775 Processor Motherboard

User's Manual

Rev. 2101

12ME-945GZMS2-2101R

* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste

and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

Motherboard

GA-945GZM-S2

Oct. 25, 2006

Motherboard

GA-945GZM-S2

Copyright

The trademarks mentioned in the manual are legally registered to their respective companies.

Notice

The written content provided with this product is the property of Gigabyte.

No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any

means without Gigabyte's prior written permission. Specifications and features are subject to

change without prior notice.

Product Manual Classification

In order to assist in the use of this product, Gigabyte has categorized the user manual in the

following:

 For detailed product information and specifications, please carefully read the

"Product User Manual".

 For detailed information related to Gigabyte's unique features, please go to the

"Technology Guide" section on Gigabyte's website to read or download the information

you need.

For more product details, please visit Gigabyte's website at www.gigabyte.com.tw

- 4 -

Table of Contents

Item Checklist ................................................................................................................. 6

Optional Accessories ...................................................................................................... 6

GA-945GZM-S2 (rev. 2.1) Motherboard Layout ............................................................ 7

Block Diagram ................................................................................................................ 8

Chapter 1 Hardware Installation .................................................................................... 9

1-1 Considerations Prior to Installation .................................................................... 9

1-2 Feature Summary .......................................................................................... 10

1-3 Installation of the CPU and CPU Cooler ....................................................... 12

1-3-1 Installation of the CPU ......................................................................................... 12

1-3-2 Installation of the CPU Cooler ............................................................................ 13

1-4 Installation of Memory .................................................................................... 14

1-5 Installation of Expansion Cards ...................................................................... 15

1-6 I/O Back Panel Introduction ........................................................................... 17

1-7 Connectors Introduction .................................................................................. 18

Chapter 2 BIOS Setup................................................................................................ 29

The Main Menu (For example: BIOS Ver. : DC) ...................................................... 30

2-1 Standard CMOS Features ............................................................................. 32

2-2 Advanced BIOS Features .............................................................................. 34

2-3 Integrated Peripherals ..................................................................................... 36

2-4 Power Management Setup ............................................................................. 40

2-5 PnP/PCI Configurations ................................................................................. 42

2-6 PC Health Status ........................................................................................... 43

2-7 Frequency/Voltage Control ............................................................................. 45

2-8 Load Fail-Safe Defaults ................................................................................... 47

2-9 Load Optimized Defaults ................................................................................. 47

2-10 Set Supervisor/User Password ..................................................................... 48

2-11 Save & Exit Setup ......................................................................................... 49

2-12 Exit Without Saving ....................................................................................... 49

- 5 -

Chapter 3 Install Drivers ............................................................................................. 51

3-1 Install Chipset Drivers .................................................................................... 51

3-2 Software Applications ..................................................................................... 52

3-3 Driver CD Information .................................................................................... 52

3-4 Hardware Information ..................................................................................... 53

3-5 Contact Us ..................................................................................................... 53

Chapter 4 Appendix ................................................................................................... 55

4-1 Unique Software Utilities ................................................................................ 55

4-1-1 EasyTune 5 Introduction ..................................................................................... 55

4-1-2 Xpress Recovery2 Introduction ......................................................................... 56

4-1-3 Flash BIOS Method Introduction ........................................................................ 58

4-1-4 2- / 4- / 6- / 8- Channel Audio Function Introduction ...................................... 67

4-2 Troubleshooting ............................................................................................... 72

- 6 -

Item Checklist

IDE Cable x 1, FDD Cable x 1

SATA 3Gb/s Cable x 2

I/O Shield

* The items listed above are for reference only, and are subject to change without notice.

Optional Accessories

 2 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-51/R)

 4 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-21/R)

 e-SATA Cable (Part Number: 12CF1-3SATPW-11R)

 COM Port Cable (Part Number: 12CF1-1CM001-31/12CF1-1CM001-12R)

 S/PDIF In and Out Cable (Part Number: 12CR1-1SPINO-11/R)

- 7 -

GA-945GZM-S2 (rev. 2.1) Motherboard Layout

KB_MS

COMA

LPT

CPU_FAN

ATX_12V

LGA775

GA-945GZM-S2

ATX

R_USB

IT8718

SPDIF_IO

FDD

PWR_LED

F_USB2

F_PANEL

F_USB1

CODEC

CD_IN

IDE

BIOS

SYS _FAN

PCI2

BATTERY

SATAII3

SATAII2

CI

PCI1

Intel

®

945GZ

USB_LAN

Intel

®

ICH7

PCIE_16

F_AUDIO

DDRII1

AUDIO

DDRII2

Marvell

88E8001

VGA

COMB

PCI3

REV: 2.1

SATAII0

CLR_CMOS

SATAII1

- 8 -

Block Diagram

Center/Subwoofer Speaker Out

Line-Out

MIC

CPU CLK+/-(200/133 MHz)

PCI Express x4

Host Interface

GMCH CLK (200/133 MHz)

DDRII 533/400 MHz

DIMM

IT8718

BIOS

Line-In

3 PCI

PCI Bus

SPDIF In

SPDIF Out

8 USB

Ports

Dual Channel Memory

Floppy

PS/2 KB/Mouse

Side Speaker Out

Surround Speaker Out

4 SATA 3Gb/s

PCI CLK(33 MHz)

CODEC

PCIe CLK

(100 MHz)

Intel

®

945GZ

Intel

®

ICH7

LGA775

Processor

LPT

VGA

Marvell

88E8001

LAN

RJ45

COM Ports

Hardware Installation- 9 -

English

1-1 Considerations Prior to Installation

Preparing Your Computer

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please

follow the instructions below:

1. Please turn off the computer and unplug its power cord.

2. When handling the motherboard, avoid touching any metal leads or connectors.

3. It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components

(CPU, RAM).

4. Prior to installing the electronic components, please have these items on top of an antistatic

pad or within a electrostatic shielding container.

5. Please verify that the power supply is switched off before unplugging the power supply connector

from the motherboard.

Installation Notices

1. Prior to installation, please do not remove the stickers on the motherboard. These stickers

are required for warranty validation.

2. Prior to the installation of the motherboard or any hardware, please first carefully read the

information in the provided manual.

3. Before using the product, please verify that all cables and power connectors are connected.

4. To prevent damage to the motherboard, please do not allow screws to come in contact with

the motherboard circuit or its components.

5. Please make sure there are no leftover screws or metal components placed on the motherboard

or within the computer casing.

6. Please do not place the computer system on an uneven surface.

7. Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

8. If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certified computer technician.

Instances of Non-Warranty

1. Damage due to natural disaster, accident or human cause.

2. Damage as a result of violating the conditions recommended in the user manual.

3. Damage due to improper installation.

4. Damage due to use of uncertified components.

5. Damage due to use exceeding the permitted parameters.

6. Product determined to be an unofficial Gigabyte product.

Chapter 1Hardware Installation

GA-945GZM-S2 (rev. 2.1) Motherboard - 10 -

English

1-2 Feature Summary

CPU  LGA775 for Intel

®

Core

TM

2 Extreme dual-core / Core

TM

2 Duo / Pentium

®

D /

Pentium

®

4 / Celeron

®

D

 L2 cache varies with CPU

Front Side Bus  Supports 800/533 MHz FSB

Chipset Northbridge: Intel

®

945GZ Express Chipset

 Southbridge: Intel

®

ICH7

LAN  Onboard Marvell 88E8001 phy (10/100/1000 Mbit)

Audio  Onboard Realtek ALC883 CODEC chip

 Supports High Definition Audio

 Supports 2 / 4 / 6 / 8 channel audio

 Supports S/PDIF In/Out connection

 Supports CD In connection

Storage  Intel

®

ICH7

- 1 FDD connector, allowing connection of 1 FDD device

- 1 IDE connector with UDMA 33/ATA 66/ATA 100 support,

allowing connection of 2 IDE devices

- 4 SATA 3Gb/s connectors, allowing connection of 4 SATA 3Gb/s devices

O.S Support  Microsoft Windows 2000/XP

Memory  2 DDRII DIMM memory slots (supports up to 2 GB memory)

 Supports dual channel DDRII 533/400

DIMMs

 Supports 1.8V DDRII DIMMs

Expanstion Slots  1 PCI Express x16 slot

(Note 1)

 3 PCI slots

Internal Connectors  1 24-pin ATX power connector

 1 4-pin ATX 12V power connector

 1 floppy connector

 1 IDE connector

 4 SATA 3Gb/s connectors

 1 CPU fan connector

 1 system fan connector

 1 front panel connector

 1 front audio connector

 1 CD In connector

 1 S/PDIF In/Out connector

 2 USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables

 1 COMB connector

 1 power LED connector

 1 Chassis Intrusion connector

Hardware Installation- 11 -

English

Rear Panel I/O  1 PS/2 keyboard port

 1 PS/2 mouse port

 1 parallel port

 1 VGA port

 1 serial port

 4 USB 2.0/1.1 ports

 1 RJ-45 port

 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear

Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)

I/O Control  IT8718 chip

Hardware Monitor  System voltage detection

 CPU / System temperature detection

 CPU / System fan speed detection

 CPU warning temperature

 CPU / System fan failure warning

 CPU Smart Fan Control

BIOS  1 4 Mbit flash ROM

 Use of licensed AWARD BIOS

Additional Features  Supports @BIOS

 Supports Download Center

 Supports Q-Flash

 Supports EasyTune (only supports Hardware Monitor function)

(Note 2)

 Supports Xpress Install

 Supports Xpress Recovery2

 Supports Xpress BIOS Rescue

Bundle Software  Norton Internet Security (OEM version)

Form Factor  Micro ATX form factor; 24.4cm x 22.0cm

(Note 1) The GA-945GZM-S2 supports up to PCI Express x4 mode. (please refer to the VGA cards

support list on page 16)

(Note 2) EasyTune functions may vary depending on different motherboards.

GA-945GZM-S2 (rev. 2.1) Motherboard - 12 -

English

1-3 Installation of the CPU and CPU Cooler

Before installing the CPU, please comply with the following conditions:

1. Please make sure that the motherboard supports the CPU.

2. Please take note of the one indented corner of the CPU. If you install the CPU

in the wrong direction, the CPU will not insert properly. If this occurs, please change

the insert direction of the CPU.

3. Please add an even layer of heat sink paste between the CPU and heatsink.

4. Please make sure the heatsink is installed on the CPU prior to system use, otherwise

overheating and permanent damage of the CPU may occur.

5. Please set the CPU host frequency in accordance with the processor specifications. It

is not recommended that the system bus frequency be set beyond hardware

specifications since it does not meet the required standards for the peripherals. If you

wish to set the frequency beyond the proper specifications, please do so according to

your hardware specifications including the CPU, graphics card, memory, hard drive,

etc.

HT functionality requirement content :

Enabling the functionality of Hyper-Threading Technology for your computer system

requires all of the following platform components:

- CPU: An Intel

®

Pentium 4 Processor with HT Technology

- Chipset: An Intel

®

Chipset that supports HT Technology

- BIOS: A BIOS that supports HT Technology and has it enabled

- OS: An operation system that has optimizations for HT Technology

1-3-1 Installation of the CPU

Fig. 1

Gently lift the metal

lever located on the

CPU socket to the

upright position.

Metal Lever

Fig. 2

Remove the plastic

covering on the CPU

socket.

Fig. 3

Notice the small gold

colored triangle lo-

cated on the edge of

the CPU socket.

Align the indented cor-

ner of the CPU with

Fig. 4

Once the CPU is

properly inserted,

please replace the

plastic covering and

push the metal lever

back into its original

position.

the triangle and gently insert the CPU into position.

(Grasping the CPU firmly between your thumb

and forefinger, carefully place it into the socket in a

straight and downwards motion. Avoid twisting or

bending motions that might cause damage to the

CPU during installation.)

Hardware Installation- 13 -

English

1-3-2 Installation of the CPU Cooler

Male Push Pin

Female Push Pin

The top of Female Push Pin

The CPU cooler may adhere to the CPU as a result of hardening of the heat paste. To prevent

such an occurrence, it is suggested that either thermal tape rather than heat paste be used for

heat dissipation or using extreme care when removing the CPU cooler.

Fig. 6

Finally, please attach the power connector of the

CPU cooler to the CPU fan header located on the

motherboard.

Fig. 3

Place the CPU cooler atop the CPU and make

sure the push pins aim to the pin hole on the

motherboard.Pressing down the push pins

diagonally.

Fig. 4

Please make sure the Male and Female push pin

are joined closely. (for detailed installation

instructions, please refer to the CPU cooler instal-

lation section of the user manual)

Fig. 5

Please check the back of motherboard after

installing. If the push pin is inserted as the picture,

the installation is complete.

Fig.1

Please apply an even layer of CPU cooler paste

on the surface of the installed CPU.

Fig. 2

(Turning the push pin along the direction of arrow is to

remove the CPU cooler, on the contrary, is to install.)

Please note the direction of arrow sign on the male

push pin doesn't face inwards before installation. (This

instruction is only for Intel boxed fan)

GA-945GZM-S2 (rev. 2.1) Motherboard - 14 -

English

Before installing the memory modules, please comply with the following conditions:

1. Please make sure that the memory used is supported by the motherboard. It is

recommended that memory of similar capacity, specifications and brand be used.

2. Before installing or removing memory modules, please make sure that the computer power

is switched off to prevent hardware damage.

3. Memory modules have a foolproof insertion design. A memory module can be installed in

only one direction. If you are unable to insert the module, please switch the direction.

1-4 Installation of Memory

The motherboard supports DDRII memory modules, whereby BIOS will automatically detect memory

capacity and specifications. Memory modules are designed so that they can be inserted only in one direction.

The memory capacity used can differ with each slot.

Notch

DDRII

Fig.1

The DIMM socket has a notch, so the DIMM memory mod-

ule can only fit in one direction. Insert the DIMM memory

module vertically into the DIMM socket. Then push it down.

Fig.2

Close the plastic clip at both edges of the DIMM sockets to

lock the DIMM module.

Reverse the installation steps when you wish to remove

the DIMM module.

Hardware Installation- 15 -

English

1-5 Installation of Expansion Cards

You can install your expansion card by following the steps outlined below:

1. Read the related expansion card's instruction document before install the expansion card into the

computer.

2. Remove your computer's chassis cover, screws and slot bracket from the computer.

3. Press the expansion card firmly into expansion slot in motherboard.

4. Be sure the metal contacts on the card are indeed seated in the slot.

5. Replace the screw to secure the slot bracket of the expansion card.

6. Replace your computer's chassis cover.

7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.

8. Install related driver from the operating system.

For example: Installing a PCI Express x16 VGA card:

When removing the graphics card, gently

push back on the black lever on the slot

and then lift the card straight out from the

slot.

When installing the graphics card, push

down on the top edge of the card until it is

fully inserted into the PCI Express x16

slot. Make sure the card is securely

seated in the slot and does not rock.

Dual Channel Memory Configuration

The GA-945GZM-S2 supports the Dual Channel Technology. After operating

the Dual Channel Technology, the bandwidth of Memory Bus will double.

If you want to operate the Dual Channel Technology, please note the following explanations due to the

limitation of Intel chipset specifications.

1. Dual Channel mode will not be enabled if only one memory module is installed.

2. To enable Dual Channel mode with two memory modules (it is recommended to use memory

modules of identical brand, size, chips, and speed), you must install them into DIMM sockets

of the same color.

GA-945GZM-S2 (rev. 2.1) Motherboard - 16 -

English

The items below are all supported under the Windows XP operating system. When using an

add-on graphics card, please first delete the onboard graphics driver before installing the driver for the

add-on graphics card.

PCI Express x16 Graphics Card Support List

Graphics Chip Maker Model Name

Nvidia Gigabyte GV-NX53128D

Gigabyte GV-NX57128D

Gigabyte GV-NX59128D

Gigabyte GV-NX62128D

Gigabyte GV-NX66256D

Gigabyte GV-NX66T128VP

Gigabyte GV-NX66T128D

Gigabyte GV-NX68T256DH

Gigabyte GV-NX55128DP

Gigabyte GV-NX68U256D

Gigabyte GV-NX62TC256D

Gigabyte GV-NX62TC128D

Gigabyte GV-NX66L128DP

Gigabyte GV-NX68256D

Gigabyte GV-NX78X256V-B

Gigabyte GV-NX78T256V-B

Gigabyte GV-NX79T256DP-RH

Gigabyte GV-NX76G256D-RH

Gigabyte GV-NX73G128D-RH

Gigabyte GV-NX73L128D-RH

Nvidia P502/P602

Nvidia 7900GTX

ASUS EN6600/TD/128

MSI NX6800GT-TD256E

WinFast PX6600GT TDH

ATi Gigabyte GV-RX30S128D

Gigabyte GV-RX60P128D

Gigabyte GV-RX60X128V

Gigabyte GV-RX70128D

Gigabyte GV-RX70P128D

Gigabyte GV-RX80T256V

Gigabyte GV-RX80L256V

Gigabyte GV-RX80256D

Gigabyte GV-RX30HM128D

Gigabyte GV-RX55128D

Gigabyte GV-RX85T256V-B

Gigabyte GV-RC850T256D-B

Gigabyte GV-RX13P256D-RH

Gigabyte GV-RX16P256D-RH

Gigabyte GV-RX18L256V-B

Gigabyte GV-RX18T512V-B

ASUS AX800XT

ASUS AX700PRO

MSI RX600 XT-TD128

Hardware Installation- 17 -

English

1-6 I/O Back Panel Introduction

PS/2 Keyboard and PS/2 Mouse Connector

To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard

to the lower port (purple).

Parallel Port

The parallel port allows connection of a printer, scanner and other peripheral devices.

Serial Port

Devices like mouses, modems, and etc. can be connected to Serial port.

VGA Port

Monitor can be connected to VGA port.

USB Port

Before you connect your device(s) into USB connector(s), please make sure your device(s) such

as USB keyboard, mouse, scanner, zip, speaker...etc. have a standard USB interface. Also make

sure your OS supports USB controller. If your OS does not supportUSB controller, please con-

tact OS vendor for possible patch or driver upgrade. For more information please contact your

OS or device(s) vendors.

LAN Port

The provided Internet connection is Gigabit Ethernet, providing data transfer speeds of 10/100/

1000 Mbps.

Center/Subwoofer Speaker Out

The default Center/Subwoofer Speaker Out jack. Center/Subwoofer speakers can be connected to

Center/Subwoofer Speaker Out jack.

Surround Speaker Out (Rear Speaker Out)

The default Surround Speaker Out (Rear Speaker Out) jack. Rear surround speakers can be

connected to Surround Speaker Out (Rear Speaker Out) jack.

Side Speaker Out

The default Side Speaker Out jack. Surround side speakers can be connected to Side Speaker Out

jack.

Line In

The default Line In jack. Devices like CD-ROM, walkman etc. can be connected to Line In jack.

Line Out (Front Speaker Out)

The default Line Out (Front Speaker Out) jack. Stereo speakers, earphone or front surround

speakers can be connected to Line Out (Front Speaker Out) jack.

GA-945GZM-S2 (rev. 2.1) Motherboard - 18 -

English

1) ATX_12V

2) ATX (Power Connector)

3) CPU_FAN

4) SYS_FAN

5) IDE

6) FDD

7) SATAII 0 / 1 / 2 / 3

8) PWR_LED

9) F_PANEL

10) F_AUDIO

11) CD_IN

12) SPDIF_IO

13) F_USB1 / F_USB2

14) COMB

15) CI

16) CLR_CMOS

17) BATTERY

MIC In

The default MIC In jack. Microphone must be connected to MIC In jack.

In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform

different functions via the audio software. Only microphones still MUST be connected to the

default Mic In jack ( ). Please refer to the 2-/4-/6-/8- channel audio setup steps for detailed

software configuration information.

1-7 Connectors Introduction

1 3

8131412

10

15

5

6

4

2

11

9

7

16

17

Hardware Installation- 19 -

English

1/2) ATX_12V/ATX (Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all

the components on the motherboard. Before connecting the power connector, please make sure

that all components and devices are properly installed. Align the power connector with its

proper location on the motherboard and connect tightly.

The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power

connector is not connected, the system will not start.

Caution!

Please use a power supply that is able to handle the system voltage requirements. It is

recommended that a power supply that can withstand high power consumption be used (300W

or greater). If a power supply is used that does not provide the required power, the result can

lead to an unstable system or a system that is unable to start.

If you use a 24-pin ATX power supply, please remove the small cover on the power connector

on the motherboard before plugging in the power cord ; otherwise, please do not remove it.

Pin No. Definition

1 GND

2 GND

3 +12V

4 +12V

1

13

24

12

Pin No. Definition

13 3.3V

14 -12V

15 GND

16 PS_ON(soft On/Off)

17 GND

18 GND

19 GND

20 -5V

21 +5V

22 +5V

23 +5V (Only for 24-pin ATX)

24 GND(Only for 24-pin ATX)

Pin No. Definition

1 3.3V

2 3.3V

3 GND

4 +5V

5 GND

6 +5V

7 GND

8 Power Good

9 5V SB(stand by +5V)

10 +12V

11 +12V(Only for 24-pin ATX)

12 3.3V(Only for 24-pin ATX)

1

3

2

4

ATX_12V

ATX

GA-945GZM-S2 (rev. 2.1) Motherboard - 20 -

English

3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector)

The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin (only for

CPU_FAN) power connector and possesses a foolproof connection design.

Most coolers are designed with color-coded power connector wires. A red power connector

wire indicates a positive connection and requires a +12V power voltage. The black connector

wire is the ground wire (GND).

Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to prevent

CPU damage or system hanging caused by overheating.

5) IDE (IDE Connector)

An IDE device connects to the computer via an IDE connector. One IDE connector can connect to

one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical

drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master

and the other as Slave (for information on settings, please refer to the instructions located on the IDE

device). Before attaching the IDE cable, please take note of the foolproof groove in the IDE connector.

2

40

1

39

CPU_FAN

1

Pin No. Definition

1 GND

2 +12V/Speed Control

3 Sense

4 Speed Control

Pin No. Definition

1 GND

2 +12V

3 Sense

CPU_FAN:

SYS_FAN:

SYS_FAN

1

Page is loading ...

Gigabyte GA-945GZMT-S2-DB User manual

This manual is also suitable for

Gigabyte GA-945GZMT-S2-DB User manual

Related papers

Other documents